Show Posts
|
Pages: [1]
|
Did you try increasing your virtual memory? I always heard that you should have a 1:1 for your combined card memory. So in your case I'd go with 64gb. On a 120GB hard drive that might be difficult. Personally I have 500GB SSD on each of my rigs. Maybe you can add another cheap SSD and just use that for VM?
You could also try just enabling one card at a time and see how many work? Miner Properties > GPU Selection at the bottom > Use selected from list > (Select just one or two then hit OK) > See if it runs (stable.) If so, add another until it stops.
I also use Awesome Miner for all of my rigs and I'm not having any issues with Claymore 15. Alternatively, try PhoenixMiner. If you have the same problem then it's probably not with the software.
I got this sorted same day... Your solution was spot on, I have now set 40GB Virtual memory... worked a charm, much appreciated for the good info.
|
|
|
Have similar issue,
Updated my miners to Claymore 15 and now they just keep crashing...
8 x Asus RX 580 OC 8GB edition per mining rig Windows 10 with Latest Update 8GB DDR4 Ram on Motherboard Additional 24GB Virtual Memory. 120GB SSD drive.
Using older AMD ASUS Drivers that were working fine before update
Everything was working fine until new Claymore 15 released...hoping it is a bug and will be fixed soon.
Some of the GPUs start up fine but then the miner crashes and restarts
I am using latest version of Awesome Miner to run my mining farm. Anyone else having similar issues?
Any help would be much much appreciated.
Cheers
|
|
|
After being in the crypto space for over 5 years... how much money is enough to retire completely? Not meaning you live on yachts or in 7 star hotels but just live a comfortable life and not have to worry about finances?
|
|
|
Anyone get issues with Temps on their GPUs going crazy, After this update through Awesome Miner Mining management tool, ALL my rigs are reporting 86+ Temps before they were all hanging around 60 - 72C
My throttle range is 86 - 90 before cut out so they all keep restarting annoyingly and costly too!
I've tried rolling back and It seems that this version has an Issue with the GPU Temps, 11.7 seems to work fine.
Any one else have this
My rigs are all
ASUS RX580 OC & TOP edition ASUS Z270-A prime i5
I'm only Mining ETH too so NO dual mining for just better efficiency.
Any help would be appreciated.
Thanks
|
|
|
OOH YEEEAH
Thank guys for the updates on your miners. I was one of the few on the front line to place an order nearly 3 months ago for 7 of these bad boys, hopefully all will be good on delivery of the miners.
GREAT DAY for me to see this.
Great job Halong ... great job!
|
|
|
Addressing this to all lovely members who are trying to prove with inexhaustible energy that CREDITS is a bad investment. https://www.reddit.com/r/CreditsOfficial/comments/82yod8/answers_to_latest_questions_and_desicions_to/Since you had enough determination to muddy this project, then be consistent and check article from that link. Thanks to you CREDITS project provides us with further evidence, that is legit, and assures us that we invest our capital well. Once again I am impressed by the level of communication between the Credits Team and the community. They create a completely new definition of interaction with investors ! :-) <3 <3 <3 <3 They still haven't addressed the issues with Github!! These guys need to realise that they are dealing with a global market with global eyes watching...!!! doing things half asse'd may work back home from where the devs are based but they have to do things that start to make sense otherwise mate I will just drop 350k tokens on the next exchange at market rate and sit back and watch another project burn out and fade into the distance of the what nots! I'm pretty certain that this prolonged attitude of the devs will make many others question the project more and we will see the price start to bleed away completely especially in this bear market.
|
|
|
I've invested big in credits, but i just wanted to ask... has anyone from the credits team have any actual video proof of the TPS? also Ivan did that video on the MD5 checksum... and for a team of tech savvy developers (Credits) they sure seem to label the terminology incorrectly on their website Checksum... hashes... encryption.... . This does make me slightly nervous about investing anymore with this company. doesn't matter if they are "techies and not good at marketing" ... that has nothing to do with getting terminology incorrect!!!
I know its just a PRE-Alpha but using MD5 in a pre-alpha is not really good way to demonstrate the processing speed of the BC. MD5 is a lot simpler than other forms of hashes and hence why their BC may be able to achieve such high rate of output TPS could be due to them using MD5 in their tests and NOT the ACTUAL intended hashing that they intend to launch their main net with.
What are your thoughts on the above... ?
|
|
|
I would've really liked if Halong would've been more open so far.
They said they will be better option than Bitmain.
Instead they are even more closed than Bitmain when it comes to the information available.
So it's not much of an improvement.
They did release this youtube video though which LOOKS VERY promising https://youtu.be/93UzVnRe6t0
|
|
|
There are a few alternatives and I think this will boost the price of the other coins while making Ethereum lose some money in the transition.
That's exactly what I think too, however depending on what the staking level is for Eth, people may buy more eth to get the nodes before the big dump in Eth price.
|
|
|
So I have a fair few mining rigs (50 x 8 GPU) all mining Eth currently, and my Million dollar BIG question is what will people be mining next?!?
I hate to shut down my rigs on the bases that I don't know which coin to mine profitably.
I'm NOT looking for simply mining coins and then trading them for BTC/Eth to invest into other ICO/projects/Coins/Tokens, this is my LAST option if there are no choices. I'm looking for a coin that has huge up potential and gains in the future like Ethereum haha but is mineable now obviously. My rigs have i5 processors so CPU mining is not my angle. They all have 120GB SSD so HDD mining is not an option too.
GPU is the best option the cards I run are Asus STRIX RX580 OC super clocked for Eth mining.
I know we are all looking for the next Eth but to add mining in there may limit some of the coins that fit the bill.
What are best choices peeps? Grin
|
|
|
This has really pissed me off I literally made my first purchase of this coin at 0.03 saw it go up and then I got a message saying its being delisted WTF. IMO they acted unprofessional and the PEOPLE should withdraw ALLLLL their funds from them in all currencies that can be. They make money on transaction well we take that away from them !!! If they want to act like children then we need to teach them a lesson, one to be remembered for EVER!!! PS. does anyone have a way to download their offline wallet as my purchase is still on their exchange.
|
|
|
The biggest issue i see with this great idea and I do mean it is a great idea.... However how would you tackle illegal activities on using other people connections, This seems to open a whole new can of worms in regards to liability. AND don't forget this sounds like a proxy system if you are using other people's data that can't be bypassed without going through their Phone Service provider (which would be a logged connection from that device IMEI) you would be using their device as a gateway to access the internet. The ONLY way I see this type of thing EVER working would be to set the whole network up as a TOR network of such and then have it use its own VPN connections encryption. You could have a free service with NO VPN and a subscription (token service) with VPN. I definitely look forward to see how this progresses. Feel free to hit me up if you need to pick my brain more than happy to help for a small reward during you ICO phase haha
|
|
|
I too would like to know if this can be mined now, as i know it was only available on the initial offering but not sure what happend to it now.
I think you have trade Ether for it on some exchanges that yhave listed it IF ANY that is.
|
|
|
Hello
How do i represent core voltaje -60 in claymore line commands? I want to undervolt using the claymore bat.
Thanks
have you tried the below? -cvddc set target GPU core voltage, multiplied by 1000. For example, "-cvddc 1050" means 1.05V. You can also specify values for every card, for example "-cvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows. Note: for NVIDIA cards this option is not supported. -mvddc set target GPU memory voltage, multiplied by 1000. For example, "-mvddc 1050" means 1.05V. You can also specify values for every card, for example "-mvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows. Note: for NVIDIA cards this option is not supported.
|
|
|
... HOLY JEBUS!!! Thanks for the info notbatman, I've been missing out on big MH/s. Going to try this ASAP and let you know if this has boosted my MH/s. Hopefully I won't have heat issues as am running full cover liquid cooled cards Many thanks Somebody said Windows might not like more than 5 GPUs without some fussing about, just heads up on that if you use that OS. Also my HD7990 is an AMD reference card. Hey notbatman, So i set it up and this is what I am getting: Does that make sense here is the bat file details, @echo off
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
ethdcrminer64.exe -tt 30,30,30,30,30,30 -mclock 1245,1245,1245,1245,1245,1245 -cclock 1024,1024,1024,1024,1024,1024 -asm 0 -esm 0 -epool eu1.ethermine.org:4444 -ewal 0x701fb173E3765aA487CCb6C0C7a171A08bB66C51 -epsw x -eworker Beast -dcri 7 I haven't made any changes to ANY other file in the Claymore folder not even the config.txt file. Also my 7990's show up as Radeon 280X, is that normal Please let me know where I am going wrong. Any help is appreciated. Thanks
|
|
|
Hey you GUYS!!!! Does anyone know what the expected hashrate is currently for XFX HD 7990 I have 3 of these mining Eth and I can't seem to get above 80 MH/s collectively , is this normal even with the large DAG ? I'm using ethminer are there better ones that run on Windows? as I can't be jacked to setup a Linux box Any help would be appreciated. Cheers PS. I have a NVIDIA 1060 and it gets roughly on average 20.56 MH/s if that helps anyone benchmarking that model. I can get 155 MH/s on UBQ with 3x HD7990 running win 10 with stock drivers. Try a UBQ, EXP or MUSIC pool and get back to us. use this batch file: ubq_pasl.bat @echo off
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
ethdcrminer64.exe -tt 30,30,30,30,30,30 -mclock 1245,1245,1245,1245,1245,1245 -cclock 1024,1024,1024,1024,1024,1024 -asm 0 -allpools 1 -allcoins 1 -esm 0 -epool us.ubiqpool.io:8008 -ewal 0xYOUR_UBQ_WALLET_ADDRESS -epsw x -eworker microsloth -dpool pasl.fairpool.xyz:4009 -dwal YOUR_PASL_ACCOUNT_NUMBER -dpsw x -dcoin pasc -dcri 7
or this bash file: ubq_pasl.sh #!/bin/bash
export GPU_FORCE_64BIT_PTR=0 export GPU_MAX_HEAP_SIZE=100 export GPU_USE_SYNC_OBJECTS=1 export GPU_SINGLE_ALLOC_PERCENT=100 export GPU_MAX_ALLOC_PERCENT=100
sudo ./ethdcrminer64 -tt 30,30,30,30,30,30 -mclock 1245,1245,1245,1245,1245,1245 -cclock 1024,1024,1024,1024,1024,1024 -asm 0 -allpools 1 -allcoins 1 -esm 0 -epool us.ubiqpool.io:8008 -ewal 0xYOUR_UBQ_WALLET_ADDRESS -epsw x -eworker microsloth -dpool pasl.fairpool.xyz:4009 -dwal YOUR_PASC_ACCOUNT_NUMBER -dpsw x -dcoin pasc -dcri 7
HOLY JEBUS!!! Thanks for the info notbatman, I've been missing out on big MH/s. Going to try this ASAP and let you know if this has boosted my MH/s. Hopefully I won't have heat issues as am running full cover liquid cooled cards Many thanks
|
|
|
Hey you GUYS!!!! Does anyone know what the expected hashrate is currently for XFX HD 7990 I have 3 of these mining Eth and I can't seem to get above 80 MH/s collectively , is this normal even with the large DAG ? I'm using ethminer if that helps lol Any help would be appreciated. Cheers PS. I have a NVIDIA 1060 and it gets roughly on average 20.56 MH/s if that helps anyone benchmarking that model.
|
|
|
These babies’s are monsters, Large in size and Power hungry. Need some help since this is my first rig and I’m a newbie of sort’s. Well here is the spec’s of the rig.
1. 1 x ASUS Rampage IV Extreme LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 Extended ATX Intel Motherboard 2. 4 x PowerColor AX7990 6GBD5-2DHJ Radeon HD 7990 6GB 384-bit x2 GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support 3. 1 x LEPA G Series G1600-MA 1600W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS GOLD Certified Full Modular Power 4. 1 x CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 Desktop Memory Model CMZ16GX3M2A2400C10 5. 1 x Intel Core i7-3820 Sandy Bridge-E 3.6GHz (3.8GHz Turbo Boost) LGA 2011 130W Quad-Core Desktop Processor BX80619i73820 6. 1 x SAMSUNG 840 Pro Series MZ-7PD128BW 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) 7. (Just in case More is needed or for rig 2.0) 1 x COOLMAX ZPS-1600B (14642) 1600W ATX12V v2.31 & EPS12V v2.92 SLI Ready CrossFire Ready 80 PLUS SILVER Certified Modular 8. 4x PCIE X16 Risers 9. Win7 64bit OS 10. Reaper latest released beta for 64bitwin7 11. Latest Drivers & bios.
Each 7990 has 2 7970 Gpu’s. ☺
Here is the question’s and issues I have come across.
When I install one 7990 everything is groovy, when I install the second the system becomes unstable and errors & various blue-screens of death occur.
Here is what I found out and tried.
Called AMD they said you can only put 2 7990’s on a mother board because they do not make the drivers to sustain them, they are already 4 7970 chips when using 2 7990’s. I called power-color and they said call AMD and update drivers. Removed old drivers and download the latest stable release and even tried the beta version without success. Flashed the bios to the latest version. With and without risers.
Reaper.conf settings kernel reaper.cl save_binaries yes enable_graceful_shutdown no long_polling yes platform 0 device 0 device 1 mine litecoin
Litecoin.conf settings
host mypool.com port 80 user smpl pass smpl
protocol litecoin
worksize 256 vectors 1 aggression 18 threads_per_gpu 2 sharethreads 32 lookup_gap 2 gpu_thread_concurrency 21712
My results have been 1.4 Ghz at times or 8,000 to 10,000 khs but starts degradation cycle to 800khs.
Questions.
1. How can I add successfully one more 7990, for a total of 2 connected to the motherboard per the AMD recommendations? 2. How do I max out my cards production via the reaper miner? Optimal reaper settings for my rig. 3. Why the High stale rate of 30-90%? 4. Is crossfire possible?
Thanks for your help with this. Have many more questions but been up for days working on this rig .
I have practically the same setup - and have issues with the cards crashing too, how did you solve this in the end was it an issue with pushing the cards too hard or was a driver/compatibility issue. PLEASE could you let me know your software setup - I am on windows 7 so preferable need a windows software requirements support. Really appreciate it if you could advise me here. Many thanks in advance
|
|
|
|