Is there any update necessary after the constantiopole hard fork? Will be client updated or working also on new chain?

Can someone help to resolve this error?

I had internet connection problem and after connetion went up again, the miner did not connect again.. I had to restart miner.
Is there any resolve for this issue? Why is phoenix connection to port 4444 nad not 5555 ssl?

17628:09:32:51.214: unkn Eth: Can't resolve host ssl://eu1.ethermine.org:5555
17628:09:32:51.214: unkn Eth: Giving up after 3 retries, switching to next pool
17628:09:32:51.214: unkn Eth: Reconnecting in 20 seconds...
17628:09:32:55.514: GPU2 Unable to submit share - pool disconnected
17628:09:33:04.989: GPU3 Unable to submit share - pool disconnected
17628:09:33:09.973: GPU4 Unable to submit share - pool disconnected
17628:09:33:11.222: unkn Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy)
17628:09:33:11.256: eths Eth: Connected to ethash pool eu1.ethermine.org:4444 (188.165.239.100)
17628:09:33:11.256: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["YourWallet.DESKTOP-O8QC2F8"]}

17628:09:33:11.277: eths Eth: Received: {"id":999,"jsonrpc": "2.0","result": false,"error": "Invalid user provided"}
17628:09:33:18.794: main GPU1: 54C 72%, GPU2: 54C 56%, GPU3: 49C 49%, GPU4: 54C 64%, GPU5: 57C 64%, GPU6: 43C 70%
17628:09:33:21.952: GPU2 Unable to submit share - pool disconnected
17628:09:33:43.568: GPU5 Unable to submit share - pool disconnected
17628:09:33:46.704: main GPU1: 55C 73%, GPU2: 54C 56%, GPU3: 49C 48%, GPU4: 54C 64%, GPU5: 58C 64%, GPU6: 43C 70%
17628:09:33:55.839: GPU4 Unable to submit share - pool disconnected
17628:09:34:04.807: GPU4 Unable to submit share - pool disconnected
17628:09:34:09.682: GPU5 Unable to submit share - pool disconnected
17628:09:34:11.873: GPU5 Unable to submit share - pool disconnected
17628:09:34:14.941: main GPU1: 54C 73%, GPU2: 54C 56%, GPU3: 49C 48%, GPU4: 55C 64%, GPU5: 58C 64%, GPU6: 42C 70%
17628:09:34:30.878: GPU3 Unable to submit share - pool disconnected
17628:09:34:42.992: main GPU1: 54C 73%, GPU2: 54C 56%, GPU3: 49C 47%, GPU4: 54C 64%, GPU5: 58C 64%, GPU6: 42C 70%
17628:09:34:48.490: GPU3 Unable to submit share - pool disconnected
17628:09:34:51.279: eths Eth: Connection closed by the pool
17628:09:34:51.279: eths Eth: Reconnecting in 20 seconds...
17628:09:35:11.097: main GPU1: 55C 73%, GPU2: 54C 56%, GPU3: 49C 47%, GPU4: 54C 64%, GPU5: 58C 64%, GPU6: 42C 70%
17628:09:35:11.285: unkn Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy)
17628:09:35:11.308: eths Eth: Connected to ethash pool eu1.ethermine.org:4444 (188.165.226.213)
17628:09:35:11.308: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["YourWallet.DESKTOP-O8QC2F8"]}

17628:09:35:11.329: eths Eth: Received: {"id":999,"jsonrpc": "2.0","result": false,"error": "Invalid user provided"}
17628:09:35:22.780: GPU6 Unable to submit share - pool disconnected
17628:09:35:39.343: main GPU1: 54C 73%, GPU2: 54C 57%, GPU3: 49C 47%, GPU4: 54C 64%, GPU5: 57C 64%, GPU6: 42C 70%
17628:09:36:02.016: GPU4 Unable to submit share - pool disconnected

I'm getting same error on my 1060 GTX 6GB card. 1070 seems ok with no issues.

I have noticed that when this error occurs and I switch on Nvidia Afterburner the system becomes extremelly choppy and laggy.. then I have to restart rig.. After restart it is OK.

Sometimes it takes more than one day that this error appears.

In previous version this error was not present.

I have also 200+ hours of nonstop mining on both AMD and Nvidia rigs.. So really good.

Appreaciated SSL connection..So far OK.

My favourite life-changing altcoin is Ethereum...
There are a lot of smart contracts already circulation in Ethereum network and ETH must be used for their transactions.
I like this coin concept and future PoS algorithm.

What seems iteresting also for the future is Telegram TON - GRAM coin. So I hope there will be also ICO for normal users as we are, not just for rich investors.
Their global network blockchain project is really promising. I will definitely buy a lot of them if they will be released for public.
 

There is similar project called "NAGA". They have their own debit card which you can fund with various cryprocurrencies - BTC, ETH, BCH, Dash...etc...

I just checked their website and it looks good. This is just for information for those who are interested in various types of crypto debit cards. So no promotion or whatsoever..

To evaluate amount of shares you need to run the miner for longer period of time. At least 24hours.. then you can make any comparison.
You can have bad luck finding shares for hour and the next hour you will find double amount of shares than your average hashrate.

That is normal behaviour of miners.

The worst experience for me was that I kept all my funds and altcoins on exchange.. This was a tought lesson so I will never do it again.
This should be warning for all of you not to keep coins and funds on exchanges.

Many of you remember Cryptsy. The owner cashed all funds and disappeared.. Sad story.

Hope he will come to justice soon.

Currently testing new version 2.7c with very positive results.

SSL connection works OK
Lower stale shares then previous 2.7a/b version
Running 24h without any problem - both Nvidia and AMD rigs
No perfromace increase, but still better than Claymore 11

Keep up the good work!

I have account on Bitstamp for about 4 years and never had issue with this exchange. Transfers and withdrawals without problems.
Binance is very good for Altcoin trading. I really recommend this.
Both exchanges offer 2FA authentication and have stable capital reserves.

Search for PhoenixMiner posts..he posted link for version 2.7a few pages ago..

There are some minor fixes like improved DevFee switching and reseting of card voltages during DevFee session. I confirm that this was fixed.

Quote from: Tranzius on February 19, 2018, 08:32:47 PM
Can someone help me with this? What does it mean? Showing randomly in miner..

"CMD command miner_file rejected: CMD is in read only mode"

thank you.
   

If you are not trying to upload epools.txt or config.txt files with the Claymore remote manager, then someone is trying to "hijack" your miner via the remote control port. Fortunately, you haven't enabled the full mode, so this is not possible but the miner warns you that someone tries to upload file via the remote management socket.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Thank you very much for your answer. I'm definitely not tryind to upload any files..

How can I get rid of this? Is this Windows related management port or miner socket?

Can someone help me with this? What does it mean? Showing randomly in miner..

"CMD command miner_file rejected: CMD is in read only mode"

thank you.

Currently running 2.7a on two rigs - 1xNividia and 1x AMD without a single crash. 64hours nonstop and running very well.

Speed is better and stale shares lower than Claymore. So far very good.

Keep up the good work guys!

Testing 2.7a from yesterday and so far OK.

However I detect difference in stale shares reporting. The miner reports 0 stale shares in one hour, but pool shows 4 stale shares - mining on ethermine.
Also effective hashrate reported in command line does not match with web reported hashrate on Ethermine.

Bug with DevFee and reseting cards voltages is fixed.
Hashrate is compared to claymore for about 1-2% better.

I think let's wait for new version. Devs are currently busy to release it, so let's wait..

I also like this miner and hope that devs will continue with it. Every competition is good. Especially when reward as "Devfee" is so great..

Currently I really don't understand why any programmer team do not assemble 10+ good programmers and make perfect mining software as it is the MOST rewarding and most expensive software in world.. Just imagine how much can Claymore earn with his software earning every hour... Incredible money mine..

I have both Nvidia and AMD and this problem occurs on AMD rig only.. Strange is also, that it resets only some of cards.
Mostly it resets PCIe 16x primary slot..Then random resets. Sometimes third card...sometimes second card.

This needs to be fixed definitely..

I'm permanently running HWinfo to detect potential memory errors. I have not experienced any hashrate loss.
HW ifo is hidden in the tray.

Has anyone experience with Blockchain drivers "Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23" and Claymore setup parameters for -cvddc ?
I defined those parameters for all cards and it doesn't work. Are those drivers and parameters supported?

So far I have best hashing power with those drivers. Tried latest one but some cards have 2/3 Mhs less..


Thank you.

Hello Phoenix, is there any scheduled date when version 2.7. will be released? I had to switch back to Claymore's miner because of that bug when during Devfee session the voltage parameters of cards are reset.

I really like your miner as it has better hashrate performance and lower stale shares on Ethermine.
Also stability is without any problems..mining 2 weeks and no sigle crash.

Thank you.