Latest posts of: mbunal

Show Posts
Pages: [1]

Alternate cryptocurrencies / Mining (Altcoins) / Re: 13 x GPU on 1 x Asus Prime z270-a anyone have 14+ working ?

on: February 17, 2022, 09:58:05 AM

Quote from: JayDDee on February 17, 2022, 06:13:50 AM It could be due to the reduced number of PCIe lanes on Pentium and Celeron CPUs. More CPU cores also helps reduce latency with a large number of GPUs to manage. i have g4400. it support 16 pcie lines. z270 chipset support 24 pcie lines. so what can be problem? ram? 4 gb i will try with 8 gb(4gbx2). also i can try with i5-6500 but it supoort 16pcie lines too. i dont think it worked. but i am trying to run 14 gpu. any help would be appreciated...

Alternate cryptocurrencies / Mining (Altcoins) / Re: 13 x GPU on 1 x Asus Prime z270-a anyone have 14+ working ?

on: February 17, 2022, 04:49:46 AM

i just tried with 14 gpu, no success. but it worked with 13 gpu verywell.

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.2e: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

on: November 24, 2020, 11:37:03 AM

hello i use hiveos. i want to use rxboost. but there is a error in log: Code: GPU1: unable to set straps: error 31 You have to run PhoenixMiner as administrator to set straps but PhoenixMiner run as root. what can be problem? what can i do?

Alternate cryptocurrencies / Mining (Altcoins) / Re: Fusion Silicon

on: May 24, 2019, 08:49:57 AM

i have a x7 too. and its firmware is 3.11a. i written in wechat with fs. there is no support comma seperated paramaters in password field. they sent to me this firmware, 3.11a. now i learned there is newer version too. i wonder is there xnsub support in v4? i cant add #xnsub at the end of pool url. also i wonder is there any overclock option? and how? here is my fw: https://ibb.co/j4ZBM0J

Alternate cryptocurrencies / Mining (Altcoins) / Re: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

on: May 22, 2019, 01:54:36 AM

hi all. we were changed the pool and coin. for more info pm me. Quote from: vitek0902 on May 05, 2019, 11:41:04 AM Quote from: Wolf6270 on February 24, 2019, 01:14:39 PM Quote from: Keops09 on February 20, 2019, 08:26:06 AM dear miner zig z series of miners in the deplorable state is obvious. The correct coin boilers in the first areas have probably saved the money but the later fields like us are now crawling. In this case, the new method of party mining can help us save money. If you're currently mining, you mining either solo or shared. it is hard to capture profitability with low hash power as a solo. Here comes party mining. So you like to mining solo, but this time you're just mining together not with yourself but with the participants. Your hash power is the sum of the hash powers of the participants. also distributes the block awards in the rate of hash power of the pool participants. Isn't it quite fair? Maybe that's how we can save our money. If you want to join the party settings are below. come to join us party ... settings ; if you use btc wallet pool url ........: stratum+tcp://lyra2v2.mine.zergpool.com:4533 pool username ...: <BTC wallet>.<machine name> pool password ...: c=BTC,mc=XVG,m=party.56N3e1Lg28698,d=512 if you use xvg wallet pool url ........: stratum+tcp://lyra2v2.mine.zergpool.com:4533 pool username ...: <XVG wallet >.<machine name> pool password ...: c=XVG,mc=XVG,m=party.56N3e1Lg28698,d=512 if any question ; https://t.me/Partymining *note ; we are mining xvg but . it will be changed according to our profitability and strength in the future. Hello from Russia! I joined the party! my nickname is Russian overclock! I changed the factory firmware code a bit, now my rig steadily issues 7.5-8 gigahash! and this is my Z1 !!! Consumption has grown to 1500 watts, if anyone is interested I can give a copy of the firmware for a small reward =) ready to buy firmware from you, if you tell me how to install it

Alternate cryptocurrencies / Mining (Altcoins) / Re: AMD Memory Tweak - Read and modify memory timings on the fly - [Vega Friendly]

on: April 01, 2019, 05:14:34 PM

how can i use this tool? i tried Code: ./amdmemtool --RFC 43 --ras2ras 176 but no success (from help). how to chose parameters for gddr5? i have rx 580/570. this is --currnet output: Code: GPU 0: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:01:00.0 CAS CL: 22 W2R: 19 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 79 RRD: 6 RCDRA: 29 RCDR: 29 RCDWA: 23 RCDW: 23 MISC RFC: 219 TRP: 29 RP_RDA: 33 RP_WRA: 70 MISC2 WDATATR: 0 T32AW: 7 CRCWL: 24 CRCRL: 3 FAW: 10 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 33 RASMACTRD: 30 ACTWR: 14 ACTRD: 18 DRAM2 RAS2RAS: 18 RP: 14 WRPLUSRP: 30 BUS_TURN: 33 GPU 1: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:02:00.0 CAS CL: 22 W2R: 19 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 79 RRD: 6 RCDRA: 29 RCDR: 29 RCDWA: 23 RCDW: 23 MISC RFC: 219 TRP: 29 RP_RDA: 33 RP_WRA: 70 MISC2 WDATATR: 0 T32AW: 7 CRCWL: 24 CRCRL: 3 FAW: 10 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 33 RASMACTRD: 30 ACTWR: 14 ACTRD: 18 DRAM2 RAS2RAS: 18 RP: 14 WRPLUSRP: 30 BUS_TURN: 33 GPU 2: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:03:00.0 CAS CL: 22 W2R: 19 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 79 RRD: 6 RCDRA: 29 RCDR: 29 RCDWA: 23 RCDW: 23 MISC RFC: 219 TRP: 29 RP_RDA: 33 RP_WRA: 70 MISC2 WDATATR: 0 T32AW: 7 CRCWL: 25 CRCRL: 3 FAW: 10 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 33 RASMACTRD: 30 ACTWR: 14 ACTRD: 18 DRAM2 RAS2RAS: 18 RP: 14 WRPLUSRP: 30 BUS_TURN: 33 GPU 3: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:04:00.0 CAS CL: 22 W2R: 19 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 79 RRD: 6 RCDRA: 29 RCDR: 29 RCDWA: 23 RCDW: 23 MISC RFC: 219 TRP: 29 RP_RDA: 33 RP_WRA: 70 MISC2 WDATATR: 0 T32AW: 7 CRCWL: 24 CRCRL: 3 FAW: 10 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 33 RASMACTRD: 30 ACTWR: 14 ACTRD: 18 DRAM2 RAS2RAS: 18 RP: 14 WRPLUSRP: 30 BUS_TURN: 33 GPU 4: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:06:00.0 CAS CL: 22 W2R: 19 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 79 RRD: 6 RCDRA: 29 RCDR: 29 RCDWA: 23 RCDW: 23 MISC RFC: 219 TRP: 29 RP_RDA: 33 RP_WRA: 70 MISC2 WDATATR: 0 T32AW: 7 CRCWL: 25 CRCRL: 3 FAW: 10 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 33 RASMACTRD: 30 ACTWR: 14 ACTRD: 18 DRAM2 RAS2RAS: 18 RP: 14 WRPLUSRP: 30 BUS_TURN: 33 GPU 5: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:08:00.0 CAS CL: 22 W2R: 19 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 79 RRD: 6 RCDRA: 29 RCDR: 29 RCDWA: 23 RCDW: 23 MISC RFC: 219 TRP: 29 RP_RDA: 33 RP_WRA: 70 MISC2 WDATATR: 0 T32AW: 7 CRCWL: 24 CRCRL: 3 FAW: 10 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 33 RASMACTRD: 30 ACTWR: 14 ACTRD: 18 DRAM2 RAS2RAS: 18 RP: 14 WRPLUSRP: 30 BUS_TURN: 33 GPU 6: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:09:00.0 CAS CL: 22 W2R: 19 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 79 RRD: 6 RCDRA: 29 RCDR: 29 RCDWA: 23 RCDW: 23 MISC RFC: 219 TRP: 29 RP_RDA: 33 RP_WRA: 70 MISC2 WDATATR: 0 T32AW: 7 CRCWL: 25 CRCRL: 3 FAW: 10 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 33 RASMACTRD: 30 ACTWR: 14 ACTRD: 18 DRAM2 RAS2RAS: 18 RP: 14 WRPLUSRP: 30 BUS_TURN: 33 GPU 7: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:0a:00.0 CAS CL: 22 W2R: 19 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 79 RRD: 6 RCDRA: 29 RCDR: 29 RCDWA: 23 RCDW: 23 MISC RFC: 219 TRP: 29 RP_RDA: 33 RP_WRA: 70 MISC2 WDATATR: 0 T32AW: 7 CRCWL: 24 CRCRL: 3 FAW: 10 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 33 RASMACTRD: 30 ACTWR: 14 ACTRD: 18 DRAM2 RAS2RAS: 18 RP: 14 WRPLUSRP: 30 BUS_TURN: 33

Local / Madencilik (Alternatif Kripto-Paralar) / claymore linux windows farkı var mı?

on: February 15, 2018, 12:34:48 PM

merhaba claymore claymore dur kardeşim ha windows ha linux farkı yok mudur? var mıdır? mesela windows ta modladığım bi ekran kartı linuxda da aynı mı çalışacak? teoride evet ama patikte yapan ve teoriyi doğrulayan var mı?

Local / Madencilik (Alternatif Kripto-Paralar) / Re: AMD RX serisi ekran kartları için Bios modifiye yapma Rehberi resimli anlatım!

on: February 15, 2018, 09:52:41 AM

makale güzel, açık ve net. merak ettiğim bazı noktaları aydınlatmışsınız. teşekkürler....

Pages: [1]