Latest posts of: alex

Quote from: tenmoi on March 03, 2018, 10:30:35 AM

I read that ddr5 memory voltage cannot be changed. What you change is the memory controller voltage. Ever since I learnt this I have never touched memory voltage again.

Are you using RX580 Nitro+ 8GB cards? can you share your bat file please.
I dont know what happened but it just started accepting core voltage. Now it shows 870mv in HwInfo and GPU-Z as well.
is 870mv good for core voltage for these cards when dual mine ETH+XVG?

Quote from: nitrobg on March 03, 2018, 06:39:36 AM

Quote from: alex_85 on March 02, 2018, 10:03:57 PM

Quote from: TigTex on March 02, 2018, 09:54:33 PM

You also need to reduce the ram voltage. Set both to 870mv and the core voltage will drop

Are you sure about that? Why we use cvddc and mvddc separately then? The point is to set core and memory voltages separately right?
I dont think its neccesarily to have same voltages for core and memory. Also i think 870mv memory voltage is too low for dual mining eth=xvg

Memory voltage is not exactly the memory voltage. Search further if you are interested.
Just set core voltage >= memory voltage, disable all but the last P-states on both memory and core, and it will stick.

Well that means if i do not undervolt memory i cannot undervolt core, i cant understand that. Can anyone else confirm?

@Claymore , is this something to do with the bug you mentioned

Code:

Stratum - reading socket failed 0, disconnect

2 times for 3 hours , and never before

thanks Claymore, quick reaction! waiting for the new upload...., btw my rejected shares are now 3 (for about 3 hours) so its definatelly issue as i never got rejects with the previous version

Quote from: TigTex on March 02, 2018, 09:54:33 PM

You also need to reduce the ram voltage. Set both to 870mv and the core voltage will drop

First time i see

Code:

Stratum - reading socket failed 0, disconnect

and then just reconnects

Any help?

Quote from: maxtommac on March 02, 2018, 06:55:58 PM

preliminary results of v11.2

reported hashrate up 0.7%
rejected shares up 0.8% from zero

stales (too early to say definitivaly) but up slightly.

At this point looks net slightly worse for me.

Just saw 1 rejected share with Claymore 11.2 . I never had rejects with 11.1 before using same setting. Will keep watching it.

Quote from: ascaloon on March 02, 2018, 09:06:03 PM

mine_phun

What is that Shieldcoin address on NLpool at the bottom of my screenshoot and where that Shieldcoin going that I give my hashpower for it? Shocked

Thanks for your answer in advance.

We all have these coins in our last 50 earnings but it doesnt matter for me really if i am seing them or not as long as i receive the XVG i deserve for my 15.250 GH/s
What i mine is , as a pool owner/developer or programmer can easily change things so we just cant see the other coins on the list. So if you only see XVG maybe you will be more than happy and do not ask questions? But the real question is how much XVG you get for 24hours work.
I dont mind if i am getting payed correctly for my XVG , all the "extra coins" to go to the pool as a tip

Anyways, i am also asking where they are going , mine_puh said they will be auto exchanged but i already asked for what rate etc...
lets see...

As for Claymore 11.2, i am running it for an hour now and i can see hashrate is littlebit higher
Currently 31.900-32.100MH/s per card (RX580 Nitro+ 8GB, Micron memory) with same settings on v.11.1 i am getting 31.600-31.850MH/s

will see what about the stale shares and rejects - i was having 0 rejects for ETH with v.11.1

Quote from: Vann on March 02, 2018, 08:43:40 PM

Just because you set a voltage doesn't mean the card will accept it if it's out of spec for the card.

https://www.youtube.com/watch?v=28YfTL0titc&t=135s

You mine 900mv is the minimum for RX580 nitro 8GB ?

Then why OverDriven tool shows the core voltage to be 870 and hwinfo shows all 10 cards at 900mv (when some are 870 and some 920)

--edit--

The guy here -> http://1stminingrig.com/use-new-claymores-dual-ethereum-gpu-miner-v11-0-blake2s-keccak-algorithms/#Sapphire_RX_580_8GB_Samsung_Memory
uses

Clocks 1200 / 2150
-cvddc 850 -mvddc 900

One question guys, i am using -ccvdc 870 but it looks like hwinfo shows GPU Core Clock 900mv
Why my gpu volatege set in claymore is not accepted?

HwInfo screenshot

--edit--

OverDrivenTool shows it correct 870mv

Quote

Your account is not visible @ mine.nlpool.nl/account, but on www.nlpool.nl b.t.w. ;-)

i dont understand what you mine

http://mine.nlpool.nl/?address=DACHmjbWd7mejCv3nYu269FwbmZpRQxRhA and www.nlpool.nl/?address=DACHmjbWd7mejCv3nYu269FwbmZpRQxRhA and http://node1.nlpool.nl/?address=DACHmjbWd7mejCv3nYu269FwbmZpRQxRhA is the same for me

I do not have much time to do chat every time i miss payment bro. I would like to mine at your pool but i dont think anybody will like to miss payment from time to time...
I just noticed it oce now (hopefully not any more) but also i didnt understand why last earnings disappeared. i am web-developer myself and i can understand if there is some kind of maintanance, db lost or something like that , maybe you can explain. Do not understand me wrong if there is adecuat explanation of something it is understandable.

http://mine.nlpool.nl/?address=DACHmjbWd7mejCv3nYu269FwbmZpRQxRhA

My last 50 earnings disappeared and also -> http://mine.nlpool.nl/site/mining last XVG block was found 2 hours ago and i do not have any earning from that block Huh

--edit--

Now appeared earning from block 1 917 336 but i am sure i am missing reward from block 1 917 042 which was found 2h ago.
Also there is some NevaCoins as well, this is mined when there is no more job for XVG mining as mine_puh said but when these coins are converted and for what rate.....nobody know? Will they be converted to the coin we mine->XVG. No transparancy or i am too stupid?

Quote from: phanbito on February 28, 2018, 02:28:17 PM

Still feel like a rookie after mining with Claymore since Nov 2017. Got my rig stable late Nov 17 and entered into dual mining after v11 came along.

However; downloaded the Verge wallet but it does not syncronize my earned XVG's. I have mined close to 400 xvg now on antminepool.
Still be patient? Am I doing something wrong?

Ollis

I am using Electrum-XVG wallet for windows and did the following:
Click on the green dot, add e3.verge-electrum.com to connect to, untick auto cvonnect, SSL is ticked. It worked for me

Then where these NevaCoins go to ? They are not payed to me as i understand?

Why on nlpooo when i am mining XVG other coins appear on Last 50 Earnings
For example NevaCoin ?

Quote

Agreed, working well now.

I cant understand at nlpool it says payout every 1 hour, but its not. My last payout is 9 hours ago, definately not every hour

--edit--

Also too many rejects atm from nlpool on blake2s XVG

@mine_phun, i tried SmartCash on your pool but i get Auth error.......
Also would like to see the others opinion is XVG more likely to grow than Smart, as i see 620 workers on NLPool mine blake2s but none mine keccak-Smart

@ciprianpt, sure it helps! and thanks!

I am currently getting 32mh/s for eth and 180mh/s for keccak with these settings

Code:

-cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2220,2220,2070,2220,2220,2150,2220,2220,2220,2220 -cvddc 870,870,920,870,870,920,870,920,870,870 -mvddc 930 -dcri 6 -ethi 16

I cant set dcri over 6 without decreasing eth hashrate, i am also with 9 X RX580 Nitro+ 8gb , Micron memory and 1 Samsung memory.
Ive read that micron gives less hashrate than Samsung/hynix but in my case all cards with micron memory hashing at 32mh/s at the moment and the one with Samsung memory gives me 30.4 (core 1250, memory 2070 core voltage 920)

So core voltage 850mv and memory voltage 900 is ok for hynix/samsung memory. I want to try those voltages on micron memory cards.
Should i use lidag and gser for stability when starting and generating dag files et....?
My eth hashrate is perfect now but more important is number of valid shares per hour right? I will keep watching hwinfo for memory errors.

Is it 100% sure that if you have more memory errors on HWinfo the result is less valid shares?