Latest posts of: alex

Show Posts
Pages: « 1 2 [3]

on: February 22, 2018, 10:47:02 PM

Quote My Nitro+ (8gb) prefers to be undervolted. Each card is it's own microcosm, I have never found generic answers for RX 580's. Even my Asus RX 580 is very different. Well, i undervolted with 10 (870) and decreased dcri -1 (currently at -dcri 6) Eth hash now increased a little bit but keccak decreased which is normal. Seems like dcri setting is 6 for me . I would like to ask if 870 mv core voltage at 1250 is safe for dual ETH=keccak on RX580 8GB, micron memory and 920mv safe for memory voltage at 2220. Is it safe to go any lower for voltages to save some more power? @Ratledge, could you share your .bat if you dual mine eth=keccak on rx580

on: February 22, 2018, 09:44:37 PM

Quote Depends on what cards you have, of course. If nVidia, try power limit around 65-75%, and around that. For me, 70% seems to be the sweet spot and keeps my temps down, also. Thanks for your answer, i am with RX580 Nitro + 8GB cards .

on: February 22, 2018, 09:10:44 PM

Quote Just try with mode 1 and you will see I got you now, so i cant compensate the ETH hash drop with little bit more core/memory/voltage increase/decrease? Anybody with experience who solved that?

on: February 22, 2018, 08:11:36 PM

Quote Yes, Hash for ETC its 110% Didnt understand that?

on: February 22, 2018, 04:47:30 PM

Another question guys after many tests for ETH+XVG mining with these settings Code: -cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2210,2210,2070,2210,2210,2140,2210,2210,2210,2210 -cvddc 890,890,910,890,890,920,890,910,890,890 -mvddc 930 -dcri 49 -ethi 16 -ftime 5 -mport 0 i am getting best results without reducing ETH mining performance (at least i think soo) I tried mining ETH+SmartCash with the same settings , onlu used dcri 7 instead of 49 Code: -cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2210,2210,2070,2210,2210,2140,2210,2210,2210,2210 -cvddc 890,890,910,890,890,920,890,910,890,890 -mvddc 930 -dcri 7 -ethi 16 -ftime 5 -mport 0 but now ETH performance redused - i am getting about 10% less ETH shares. What would you suggest to change for ETH+SmartCash mining - more cclock/mclock/mvddc/cvddc? Is ETH+keccak more core or memory intensive than ETH+XVG Thanks

on: February 21, 2018, 10:21:25 PM

I am still at confirmed/unconfirmed at 0 1h 25m Is this normal, i see my hashrate etc...but...?

on: February 21, 2018, 10:10:36 PM

How long until i see confirmed/unconfirmed ballance >0 mining smartcash for 1h 15 m

on: February 21, 2018, 09:41:09 PM

Thank you guys, i can breathe much more better now

on: February 21, 2018, 09:23:15 PM

Quote Ppl should rly drop WTM and learn to make calculations themself Sorry but didnt understand that....?

on: February 21, 2018, 09:09:00 PM

Guys are you sure mining smartcash is profitable? WTM gives me -45$ for a month? 10X RX580 nitro + 8GB hashing at 2200mh/s, extra power for dual mining approx +400W (40W wach card) -> https://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=2200.0&p=400&fee=2.0&cost=0.12&hcost=0.0&commit=Calculate With what cards are you mining SmartCash ? What hashrate?

on: February 21, 2018, 02:24:08 PM

Quote from: goodbitprofit on February 21, 2018, 01:11:10 PM Quote from: alex_85 on February 21, 2018, 11:21:26 AM Guys i know there are many posts etc, but could you recommend best -cclock/-cvddc and -mclock/-mvddc for Sapphire RX580 Nitro+ 8GB Micron memory is 1250/2210 good with 900mv core voltage ? Of course the target is minimum mem errors, highest hashrate, minimum stale shares and wattage I have 3 Hynih and 3 Samsung memory -cclock 1200,1150,1200,1200,1200,1200 -mclock 2250,2050,2030,2200,2230,2050 -powlim 20,20,20,20,20,20 -cvddc 900,900,900,900,900,900 -mvddc 900,900,900,900,900,900 This setup I am using in past 2 month, not checking mem errors, with Clay 11 Hash r increased for 1-3%, stale 1-3% Thanks for your answer, is this for dual or only eth mining?

on: February 21, 2018, 11:21:26 AM

Guys i know there are many posts etc, but could you recommend best -cclock/-cvddc and -mclock/-mvddc for Sapphire RX580 Nitro+ 8GB Micron memory is 1250/2210 good with 900mv core voltage ? Of course the target is minimum mem errors, highest hashrate, minimum stale shares and wattage

on: February 20, 2018, 07:07:51 PM

Yep, lets discuss here, so anyone mining on nlpool -> XVG please report is it more stable now or all pools are crap?

on: February 19, 2018, 08:12:43 AM

I was also getting 63-72ms from Bulgaria, but now 1300-2500ms , also hashrate dropped , no good - its definately not from my end becouse all settings are the same and internet connection is good. It was perfect couple of days ago ***edit its good now 63ms but looks like fluctating....will keep watching it

on: February 18, 2018, 03:17:19 PM

Looks like the same is happening like with antminepool, someone mentioned good limit for one port for XVG mining is 1500. As i see another port is needed and i think even limit each port to max 1200-1300 workers - just my opinion , might be more stable. There is no point to jump from pool to pool becouse of these rejects , try to keep it stable and appriciate your work NLPool

Pages: « 1 2 [3]