Bitcoin Forum
September 20, 2019, 10:53:41 AM *
News: Latest Bitcoin Core release: 0.18.1 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: « 1 2 3 4 5 6 7 8 9 10 11 [12] 13 14 15 16 17 18 »
221  Economy / Exchanges / Re: BTC-E.com exchange - BTC/NMC/LTC/NVC/TRC/PPC/FTC/XPM - USD\EUR\RUR (fee - 0.2%) on: April 21, 2014, 02:06:15 AM
Hi
what is the maximum amount I can transfer to a Visa or Mastercard at one time?
Thanks

"One card is allowed to make transfers of up to 2,499 USD per week."
I don't see any other max limit, so it is probably also 2,499 max per single transaction.
This is just an assumption, not certain.

Thank you. Btc-E support...lol
222  Bitcoin / Hardware / Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner on: April 16, 2014, 09:42:26 PM
Does the latest firmware include all the updates or do I need to load them all?

Thanks
223  Bitcoin / Hardware / Re: AntMiner S2 1TH/s Miner (1w/GH/s) on: April 16, 2014, 12:21:20 PM
29 out of 30 blades is not bad...time to contact bitmain and see what they can do for me. I am just glad it wasn't the mainboard. Grin
Dam that was a quick reply...I LOVE BITMAIN.
They are going to RMA it. Kinda wish they would let me pay for the blade/hashboard and send it to me while I send this one back. Then they cuold refund me once they have the bad one. but alas I am happy that they have responded so quickly. Thanks again BITMAIN.

I love them too, but RMA process is a nightmare. I received an S1 with a bad control board paid the entire cost of a new S1 and they shipped the board... thanks. Shipped the board back UPS at a cost of $129 because they had to receive it within 7 days of me getting the replacement board. Long story short miner no mine for 3 weeks, .93 BTC for board, $129 for shipping board back, and still no refund or compensation. Did get an email 4 days ago from BITMAIN stating not to worry all will be good Huh

One bad out of twenty is pretty damn good and I'll still buy from them but damn take care of my RMA! And I still want a T-shirt Grin 
224  Economy / Exchanges / Re: BTC-E.com exchange - BTC/NMC/LTC/NVC/TRC/PPC/FTC/XPM - USD\EUR\RUR (fee - 0.2%) on: April 15, 2014, 01:08:55 PM
Hi
what is the maximum amount I can transfer to a Visa or Mastercard at one time?
Thanks
225  Economy / Exchanges / Re: BTC-E.com exchange - BTC/NMC/LTC/NVC/TRC/PPC/FTC/XPM - USD\EUR\RUR (fee - 0.2%) on: April 10, 2014, 12:30:50 PM
I did a transfer to a Mastercard on 4/5 how long should it take to post?
Thanks


Withdraw be made within 72 hours, Reale trying to send during the day.

Thanks, it posted last night.
226  Economy / Exchanges / Re: BTC-E.com exchange - BTC/NMC/LTC/NVC/TRC/PPC/FTC/XPM - USD\EUR\RUR (fee - 0.2%) on: April 09, 2014, 09:22:57 PM
I did a transfer to a Mastercard on 4/5 how long should it take to post?
Thanks
227  Bitcoin / Pools / Re: [570 TH] BitMinter.com [1% PPLNS,Pays TxFees + MergedMining,Stratum,GBT,vardiff] on: April 09, 2014, 12:12:51 AM
WOW..who sacrificed the goat?
228  Bitcoin / Pools / Re: Weekly pool and network statistics on: April 07, 2014, 11:48:36 AM
Thanks, really appreciate your efforts on this. KNC is killing it with other peoples money.
229  Economy / Services / Re: [open[Lee group,Round 4]3150$ and 2800$ !! Sales promotion of dragon 1T Miner on: March 30, 2014, 09:59:19 PM
Pm'd you are these still available and what is the current price for delivery in BTC? Thanks
230  Bitcoin / Hardware / Re: [Antminer S1 Sales open] Price changes daily, now 0.893 BTC for 180GH/s on: March 30, 2014, 09:48:23 PM
Back in stock. Cheesy

And gone again Tongue
231  Economy / Services / Re: [open[Lee group,Round 4]3150$ and 2800$ !! Sales promotion of dragon 1T Miner on: March 27, 2014, 11:14:40 PM
I had the same error with mine, turn it off at the machine and turn it back on.
232  Bitcoin / Mining support / Re: Can't Connect to AntMiner S1 on: March 27, 2014, 12:01:57 AM
What is your normal default gateway?
233  Bitcoin / Hardware / Re: [Antminer S1 Sales open] Price changes daily, now 0.918 BTC for 180GH/s on: March 25, 2014, 12:38:02 PM
My S1 controller was dead! How can I buy and replace it?

Contact info@bitmain and tell them you need a new control board. They will send you a bill for the full price of an S1 and refund it when you ship the dead controller back. Just ordered one last night, you have to ship the dead one back and it needs to be received with a week. Hopefully BITMAIN will compensate me for the 3 weeks of lost mining with a coupon..HINT..HINT Grin
234  Bitcoin / Group buys / Re: [CLOSED] 1THs 1kW 28nm Miner - $4200 - March 18th, BTC, Wire, Paypal - Last Call on: March 25, 2014, 01:42:25 AM
I didn't know that would break it. One of the machines did come with 0.0.0.0 though and I figured I'd keep all the same settings to make things easier, boy was I wrong. Had 6+ hours of frustrations!

Thank you guys so much for all the help. I really do appreciate it!

Special thanks to you Dave, you've been great through all of this.

I will def do another GB with you, and I promise to give you less hassle next time Smiley



On a side note.... anyone know how to SSH into this unit? What port does it use? And whats the user/pass? root/root?
I just want to access CGMiner to view it.

I think you just putty the IP

Here's some info on whats inside

Turn it off, then on again.
SSH into the pi
Locate the CGminer folder
Create a .sh , name it to whatever you want (nano Overclock.sh  <-- just a example)
Add:

Code:

sudo ./cgminer -o "1" -u 2 -p bac --no-submit-stale --tempCut 70 --real-quiet --queue 1 --cs 9 --stmcu 0 --diff 5 --api-listen --api-network --A1Pll 800


1: Keep the ", add pool adress
2: Wallet or Username, depends on which pool you use
800: Default clocksetting, you can push it to 850Mhz but no more.

Save the file
Now you need to install screen for the pi, to keep the resource running even when you logout of the pi.

Code:

sudo apt-get install screen
screen bash


Now you´re in screen
Locate the CGminer folder
Now you need to run the .sh

Code:

sh Whateveryounamedthefileas.sh


Press CTRL + A + D to close screen
You´re still connected to the pi via SSH.

Code:

Logout


Now you´re not connected to the pi anymore and your Dragon is running the chips in overclocked mode.
Don´t connect to the web frontend! (If you do, you need to start over from step 1 again)
Check your hash status via the pool.

IMPORTANT:

If you got the 32 chip version it´s already clocked to 900Mhz (Instead of more chips they used a little more expensive components to handle the over clock, but saved a bunch of money since the A1 is more expensive). DO NOT EVEN TRY TO OVERCLOCK. Add blades instead.

If you got the 40 chip version you can push it to 850Mhz as long as the unit is in a cold room. The 850Mhz setting makes the Dragon pull 1000-1100 watt, so don´t expect the stock PSU to survive to long (unless you got the 2x650w psu version) but should give you 50-100Ghz more to play with.

If you turn off the unit or experience power outtake, just start screen on the pi and run the .sh again and you´re back on over clocked chips again.

Say thank you and send me a beer here: 1Nm46UJo57NAuwA9XdAoaYQpUk4Phg2Ueu
235  Bitcoin / Group buys / Re: [CLOSED] 1THs 1kW 28nm Miner - $4200 - March 18th, BTC, Wire, Paypal - Last Call on: March 25, 2014, 01:30:46 AM
8.8.8.8 is actually a Google Public name server, which is why that unit worked.

8.8.8.8 use it on all my miners
236  Bitcoin / Group buys / Re: [CLOSED] 1THs 1kW 28nm Miner - $4200 - March 18th, BTC, Wire, Paypal - Last Call on: March 25, 2014, 01:21:21 AM
Just got off the phone with him; it's resolved.

There are 4 network settings fields that need to be completed: IP Address, Subnet Mask, Gateway, and DNS Server.  If any of these fields are missing or incorrect, the unit will not be able to access your pools.

No Shit Wink
237  Bitcoin / Group buys / Re: [CLOSED] 1THs 1kW 28nm Miner - $4200 - March 18th, BTC, Wire, Paypal - Last Call on: March 25, 2014, 01:14:31 AM
Ya, took apart both miner. Nothing is loose as far as I can tell. Pushed all cables in just to make sure.

You have two and neither will hash?
238  Bitcoin / Group buys / Re: [CLOSED] 1THs 1kW 28nm Miner - $4200 - March 18th, BTC, Wire, Paypal - Last Call on: March 25, 2014, 12:55:24 AM
I've tried both. Same results  Sad

Ugh! On to the next, have you taken it apart and checked for loose connections?
239  Bitcoin / Group buys / Re: [CLOSED] 1THs 1kW 28nm Miner - $4200 - March 18th, BTC, Wire, Paypal - Last Call on: March 25, 2014, 12:46:00 AM
I've turned it off and on a million times already. I've been working on these miners for 6+ hours. Can't get them to run.

Soon after I press "Start" it changes to "Stop" maybe 30 seconds later.

Do you have it on manual start or power automatically?
240  Bitcoin / Group buys / Re: [CLOSED] 1THs 1kW 28nm Miner - $4200 - March 18th, BTC, Wire, Paypal - Last Call on: March 25, 2014, 12:36:14 AM
Am I the only one that can't get these bloody things to run? I had it on Eligius for 2 hours, even though on the miner it showed 1TH, on the pool it wouldnt go above 15GH/s. I took off eligius and changed it to BTCGuild only now, and it won't even start hashing.


Edit:

I keep getting


               
Error getting device list: ERR: socket connect(0) failed


when i click on the real-time monitoring

I had the same error, have you tried turning it off and back on? It took off after I did that.
Pages: « 1 2 3 4 5 6 7 8 9 10 11 [12] 13 14 15 16 17 18 »
Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!