Show Posts
|
Pages: [1]
|
Hello, I downloaded the wallet (current version 13.0.5.Win64) but I can't sync it, I still don't have a connection - 0 activer connections to pyrk network and I'm 47 weeks behind.
Can anyone help me? Thank you.
Hi there, if it is not your fire wall or router blocking it. Go here https://explorer.pyrk.org/peersThen in the wallet's debug console type in "addnode ipaddressfromsite onetry" only select 0.13.0.5 clients if the wallet says "null" it is working even if it does not add a peer immediately. It works! Thank you very much.
|
|
|
Hello, I downloaded the wallet (current version 13.0.5.Win64) but I can't sync it, I still don't have a connection - 0 activer connections to pyrk network and I'm 47 weeks behind.
Can anyone help me? Thank you.
|
|
|
You can use second pool with much lower difficulty (5000 at this moment): pool2.webchain.network:2222 Statistics are common for both pools and are available on pool.webchain.network.
According to pool's logs, miners that have huge hashrate are farm of servers.
Thank you for the recommendation. I use for mining only 1-2 threads, diff = 5000 is OK. Higher diff (20 000 or more) would be the end for me (probably)..
|
|
|
How can I set static diff on webchain pool? 20 000 is for low-end hardware too much. (address 0x1b39ececb08d3e9cb681eaca7aef60ad626c16ac have 103 kH/s - Is it a cluster about 1000 cpu? or gpu?)
|
|
|
Yes, but i dont know where to look in my wallet to find the address. I saw that the official pool pays automatically on every Sunday.
In wallet click on button receive and then on request payment, then an address is generated. Official pool (pool.elicoin.net) : "Payouts are made automatically every 0.16666666666667 hours for all balances above 0.001, or 0.0001 on Sunday. For some coins, there is an initial delay before the first payout, please wait at least 6 hours before asking for support. Blocks are distributed proportionally among valid submitted shares."
|
|
|
Hello guys, Noob questions first, I downloaded Elcoin-win64-1.0-setup, after successful sync I get the Elcoin Wallet. (where I will found my wallet address) second, I downloaded Elcoin Gui Miner 0.1 where I get a user: Ef********* (this is my wallet address??).When i paste this address in http://pool.elicoin.net/ it says that i had earnings over the last 24 h. How is it possible? And where i can find on pool.elicoin how to withdraw ELI? Thx guys! You can find your address in your wallet. In miner you have probably default address, that's probably address, who owns developers.
|
|
|
Hi, I downloaded wallet (Windows 64) and since I had problems with sync, I tried to change something in settings (I do not remember exactly what). After start of application show error: "Error: Unsupported argument -socks found." "Running SOCKS version is not possible anymore, only SOCKS5 proxies are supported". However, I don't know how to change this parameter, it is not visible anywhere, I have also searched the registers.
I have done the same steps. in Options there is tab Network. there you can switch on option "connect through SOCKS 5 proxy". After restart I got the same error. To fix this issue open properties ( right button of mouse on nihilio icon) and in tab General add option -reset. start nihilo wallet. In general tab I see only name textbox. (When i append parameter -reset only rename this file) I tried run from cmd with option (parameter) -reset, but with same error.
|
|
|
Same thing... So, if you haven't read up, we're currently in the middle of trying to fix a chain split. If your "missing coins" it can mean a few things. The blocks you mined may have been orphaned in which case you effectively didn't mine anything at all. The transactions may be conflicted, which means your wallet and the pool are on two separate chains. In that case, if the coins don't get orphaned, the coins will be sent back to the pool which you will likely need to contact. Thank you for the answer, I wanted to make sure I did not do anything wrong.
|
|
|
Hi, I downloaded wallet (Windows 64) and since I had problems with sync, I tried to change something in settings (I do not remember exactly what). After start of application show error: "Error: Unsupported argument -socks found." "Running SOCKS version is not possible anymore, only SOCKS5 proxies are supported". However, I don't know how to change this parameter, it is not visible anywhere, I have also searched the registers.
|
|
|
Hi,
I tried mine from my PC and from my VPS and all works fine. But when I'm trying mine with rig from miningrentals with yescriptR16 something is wrong. 100% my shares is invalid. If I tried mine elicoin (coin, that use to mine yescriptR16) all works fine.
Can you help me anyone?
|
|
|
I have problem with install cpuminer on Ubuntu. I tried this tutorial https://github.com/elicoin/elicoin/blob/master/MINING.md, and I download cpuminer 3.8.3.3. I try too v3.7.10, but I have same error. 1) apt-get update && apt-get upgrade 2) apt-get install build-essential libssl-dev libcurl4-openssl-dev libjansson-dev libgmp-dev automake screen ca-certificates wget tar 3) wget https://github.com/JayDDee/cpuminer-opt/archive/vx.x.x.tar.gz4) tar xvzf vx.x.x.tar.gz 5) mv cpuminer-opt-x.x.x cpuminer 6) cd cpuminer 7) ./build.sh Steps 1-6 are OK, but step 7 throw error inlining failed in call to always_inline '_mm_shuffle_epi8': target specific option mismatch. Did somebody install cpuminer on ubuntu? I have Ubuntu installed on all the servers I am using to mine. Here is the break down that should install it correctly for you. 1) Open terminal. 2) sudo apt-get install build-essential libssl-dev libcurl4-openssl-dev libjansson-dev libgmp-dev automake 3) git clone git://github.com/JayDDee/cpuminer-opt 4) cd cpuminer-opt 5) ./build.sh if ./build.sh does not work then a) ./autogen.sh b) CFLAGS="-O3 -march=native -Wall" CXXFLAGS="$CFLAGS -std=gnu++11" ./configure --with-curl c) make 6) ./cpuminer -a yescryptr16 -o stratum+tcp://[MINING POOL ADDRESS] -u [YOUR WALLET ADDRESS] Try cloning directly from github. Hope that helps you out. If you have any more problems I can try to help. If you are trying an older AMD processor the miner has issues. EDIT: here are his release notes that might help also https://github.com/JayDDee/cpuminer-opt/blob/master/RELEASE_NOTESThank you very much, but I have same problem when i try ./build.sh. I tried also you alternatively way (a,b,c) but after make I have same error. (I also cloned directly from github) I'm trying this on vps, I don't know if it can cause a problem. I have reserved 4 physical Thread.
|
|
|
I have problem with install cpuminer on Ubuntu. I tried this tutorial https://github.com/elicoin/elicoin/blob/master/MINING.md, and I download cpuminer 3.8.3.3. I try too v3.7.10, but I have same error. 1) apt-get update && apt-get upgrade 2) apt-get install build-essential libssl-dev libcurl4-openssl-dev libjansson-dev libgmp-dev automake screen ca-certificates wget tar 3) wget https://github.com/JayDDee/cpuminer-opt/archive/vx.x.x.tar.gz4) tar xvzf vx.x.x.tar.gz 5) mv cpuminer-opt-x.x.x cpuminer 6) cd cpuminer 7) ./build.sh Steps 1-6 are OK, but step 7 throw error inlining failed in call to always_inline '_mm_shuffle_epi8': target specific option mismatch. Did somebody install cpuminer on ubuntu?
|
|
|
|