listreceive dbyaddress you forgot the d... 
|
|
|
Disk wait times? 
|
|
|
Yes, that's right, ladies and gentlemen....
Eligius-US found a block while DOWN!
Preliminary calculations state that the chances of this happening are 1/(1/0), or 1/(1/(0/0)).
Additionally, EU pool is also... 2.8/247s as lucky as US.
|
|
|
Yes, that's right, ladies and gentlemen....
Eligius-US found a block while DOWN!
Preliminary calculations state that the chances of this happening are 1/(1/0), or 1/(1/(0/0)).
Additionally, EU pool is also... 2.8/247s as lucky as US.
|
|
|
IP for me toaster, why? I hardly want to make toast in my house while away from my house... 
|
|
|
Ah, PWM  I guess anything more expensive would be stupid with this...  On the subject of changing the capacitors, as long as I keep the same uf, it should continue to work in the same manner...? :S Sorry, a bit rusty on electronics, haven't done much in a year, been too busy with other stuff. (Anyoone else here use PIC32 microcontrollers?  ) 
|
|
|
I'm afraid XFX5770s even at stock and 100% fan don't go lower than 66C in afterburner at full load for me... ;S 78C was wrong, from memory. 71C. Also, this the Afterburner temps, and ATi CCC reads 66C, however, I'll go with the higher ones from afterburner as worst case..  The I have a large fan covering everything on the closest-to-front 2/3s of the graphics card, too  Why do the capacitors reach so high a temperature, are they rapidly charging and discharging for voltage regulating purposes? ("switching"?) If they're capacitors, why can't I just go and buy some equivelant, higher-maximum voltage high quality ones, de-solder the old ones, and put on the newer ones?
|
|
|
The important part there is Germany. Try, for example, in Britain, and almost any BT users will have it enabled, as their "Home Hub" routers have it by default.
|
|
|
Which chip on the board is the VRM, I can just add a small heatsink, I have a bunch of them lying around 
|
|
|
Mine runs at 78C, it's called using a huge fan of doom that sounds like a jet engine  I'm afraid I don't know MHash/watt, I'll check once I can be bothered..., don't have anything to measure it with, and don't want to mess with 240V myself. edit: howishot measure VRM temperature?
|
|
|
Using Saphire Trixx oldest version available on their site, and afterburner, set Voltage to: 1.25V in Trixx Memory clock 300, in afterburner Core clock 1085. (ab) Is this the best possible MH/s/$? 
|
|
|
tuesday, at 3:42pm UTC
clearly we just cleared a double reverse head and shoulders teacup pattern in the market, exactly 65.234 hours later the market will rally again.
I respectfully disagree. While at first glance this make seem like a teacup at the logarithmic terminus, the off-peak margin boundaries indicate that the "random" fluctuations of what we're seeing are actually a small cross section of a large and predictable bullflop scheme, and because of this, investors would be wise to place their buys at the dog end of each mode. 
|
|
|
And now we're at 23. 
|
|
|
Looks perfect! Any feedback? 175USD is quite a lot more expensive than the asrock mobo, although if the asrock mobo is unreliable/no support from manufacturer, then I don't know. Still more expensive than the two I would consider, sorry 
|
|
|
Unless this has changed in the latest release(I'll check ina minute  ), why shouldn't it be enabled by default? Many people have routers with UPNP support, and enabling it would allow new users who don't know what it is, or haven't looked in the options, to get more than 8 connections.
|
|
|
lightspeed, calibre... I like both suggestions, although I'd go with calibre's Calibre, would you be okay if I gave you 0.15 and lightspeed 0.1? 
|
|
|
I'm just waiting for it to hit twenty, so I can make an annoying poster. I've been sure not to mention the b-word, so no comics will turn up, at least!
|
|
|
Topic says it all.  edit:23!
|
|
|
People can't get funds in on weekends. Simple as that, is it not? (In reply to post above, not saying a loss of 2/3s value is normal for a weekend  ) Also, yey, $17 
|
|
|
july 29th, 2070. the man from the future said so.
WHEN WAS THIS? :O
|
|
|
|