Latest posts of: BitSoftGeek

Dear friends and comunity memmbers,
Miningpoolhub's latest updates caused zFastminer to slow down due to the change in the initial difficulty from 5 to 30.
This change brought a lot of luck to the pool and we welcome that

Before we release a new updated version, please use another miner (like coolminer or ccminer...)

Happy Mining

zFastminer team.

_______________________________________________________________________________ _______________

[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin xzc Miner On Poolside For NVIDIA Pascal GPUs
***** Optimized For MiningPoolHub - Fork from tpruvot ccminer 2.2.5 *****

Update Jun 22th: New Version Release: zFastminer-v2.3.4

Dear friends and community memmbers,
This new update is highly recommended, we advise you all to update to zFastminer-v234 for Reduced Dev Fee 1.0%,
Nvidia Maxwell support(sm_52) and better stability.

Changelog:

Dev Fee reduced to 1.0%.
Added Nvidia Maxwell(sm_52) support.
Removed the min number of GPU's, Now can run on 1 Gpu too.
Bug Fixes for better stability.

Nvidia GeForce 397.31 WHQL and newer drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.0%).

Download zFastminer-v2.3.4

Code:

https://file.fm/f/r3sym389

HAPPY MINING

zFastminer team.

_____________________________________________________________________

Update May 22th: New Version Release: zFastminer-v2.3.3

Dear friends and community memmbers,
This new update is highly recommended, we advise you to update to zFastminer-v233 for better speed (Miner & Pool), better stability and less power spikes...

Changelog:

Improved kernel ~+5% speed improvement from previews version (v2.3.2)
Miner can display now if blocks found - "...SharesAccepted:(6543/6543), BlocksFound:(1)..."
MaxNonces found per kernel launch increased up-to 3 Nonces(work->nonces[2]).
We reduced waiting time for our optimization to apply on miner launch.
Another attempt to reduce power spikes from previous version.

Nvidia GeForce 397.31 WHQL and newer drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 7~15 minute after program start to avoid disabling our miner Fee (1.8%).

_____________________________________________________________________

Update May 4th: Updated Version Release: zFastminer-v2.3.2

Changelog:

Fixed Stratum connection Bug.
Added support for IP addresses as URL- please choose the best IP for you with the lowest ping.
Attempt to reduce power spikes.
Mining Rigs with less then 2 GPU's not Supported.
Max GPU's support increased to 19 per Rig.
'--hide-diff' is ON by default to reduce CPU usage.
Small Reduction of the Intensity for better stability.
Compiled with Cuda 9.2

Nvidia GeForce 397.31 WHQL drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Regarding power spikes:
We have looked about this issue with ccminer and found out that some users found solution by using '-plimit' option to limit the max power usage of the GPU's(in addition to MSI afterburner), you can set values per GPU like this:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q -plimit 60,60,60,60,60,60,60,60

This sets 60% power limit for each GPU on a rig with 8 GPU's, try this option with your preferred power percentage

Regarding MPH ongoing maintenance and stratum connection issues:
We enabled using IP address as URL and now you can choose the best IP address with the lowest ping for you and you shouldn't have connection problem anymore.
For example:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://139.162.132.70:20581 -u USERNAME.NewWORKERNAME -p x -q

List of IP addresses:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

How to Test Ping?:
Open command prompt/PowerShell and type:

Code:

ping us-east.lyra2z-hub.miningpoolhub.com

And you will see something like that:

Code:

Pinging us-east.lyra2z-hub.miningpoolhub.com [139.162.132.70] with 32 bytes of data:
Reply from 139.162.132.70: bytes=32 time=68ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55
Reply from 139.162.132.70: bytes=32 time=63ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55

ping europe.lyra2z-hub.miningpoolhub.com
Pinging europe.lyra2z-hub.miningpoolhub.com [139.162.46.14] with 32 bytes of data:
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=423ms TTL=51
Reply from 139.162.46.14: bytes=32 time=426ms TTL=51

Keep trying different IP's or URL's MPH URL's or choose from this list and test the ping:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

us-east.lyra2z-hub.miningpoolhub.com
europe.lyra2z-hub.miningpoolhub.com
asia.lyra2z-hub.miningpoolhub.com
Until you find best IP address with the lowest ping and then use it in your .bat file.
_____________________________________________________________________

Update April 26th: Updated Version Release: zFastminer-v2.3.0

Changelog:

Compiled with Cuda 9.2
Small changes to kernel +2% ~ +5% speed improvement from previews version (v2.2.9)
Mining Rigs with less then 3 GPU's not Supported

Nvidia GeForce 397.31 WHQL drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Start.bat example:
zFastminer-v230 -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q
zFastminer-v230 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q
zFastminer-v230 -a lyra2z -o stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q

______________________________________________________________________

Update April 19th: Updated Version Release: zFastminer-v2.2.9

Changelog:

Miner Fee reduced to 1.8%.
Small changes to kernel + Second Nonce is working now, while not using quiet option "-q" you gonna see message like this when Second Nonce found:"GPU #6: Found second Nonce: c1fa0d6f!"
Around 5% speed improvement on poolside.

zFastminer-v2.2.9 Most Powerful And Profitable Zcoin Miner For NVIDIA GPUs At This Time. TESTED AND VERIFIED!
The optimization will only apply after 15~20 minute after program start to avoid disabling our miner Fee (1.8%).

Please mine only with full Rigs - (single GTX 1060, 1070, 1070 TI, 1080, 1080 TI isn't fast enough) to get best result.
Use New WORKERNAME for this miner to fix rejected shares error.
______________________________________________________________________

Update April 14th: Updated Version Release: zFastminer-V2.2.85

Minor bug fixes - please mine only with full Rigs (single GTX 1060, 1070, 1070 TI, 1080, 1080 TI isn't fast enough) to get best result.

zFastminer-V2.2.85 Most Powerful And Profitable Zcoin Miner For NVIDIA GPUs At This Time. TESTED AND VERIFIED!
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
Please use New WORKERNAME for this miner to fix rejected shares error.
_____________________________________________________________________

Update April 10th: Updated version release: zFastminer-V2.2.8

Added support for GTX 1060 3GB/6GB - please test only with full Rigs (single 1060 isn't fast enough) to get best result.
Fixed "JSON decode failed(-1)"
Minor bug fixes
Quiet mode set to OFF by default, for cleaner stats display please use '-q' option at .bat file

zFastminer-V2.2.8 Most profitable Zcoin miner for NVIDIA GPUs at this time. TESTED AND VERIFIED!
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
_____________________________________________________________________

Update April 7th:
Dear friends and community members,
on this weekend we were working hard on our next release - zFastminer-V2.2.7 to fix the reported bugs, to add support for GTX 1060 3Gb/6GB, and testing Linux version for future release...

Please keep in mind that testing with single GPU will not get you promised hashrate improvement.
To get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.
_____________________________________________________________________

Update April 7th:
Dear friends and community members,
on this weekend we were working hard on our next release - zFastminer-V2.2.7 to fix the reported bugs, to add support for GTX 1060 3Gb/6GB, and testing Linux version for future release...

Please keep in mind that testing with single GPU will not get you promised hashrate improvement.
To get the best from our miner you should test it with more then 3 GPUs active to get better hashrate on MPH pplns system.
_____________________________________________________________________

Update April 5th Updated version release: zFastminer-V2.2.6

Increased reported speed on pool
Added Volta SM_70 support
Miner Fee set to 2%
Minor bug fixes
Quiet mode set to ON by default for cleaner stats, use '-q' if you want to disable it
_____________________________________________________________________

[ANN] April 04, 2018

Dear Friends,
We are exited to announce our best Zcoin mining software for Rigs - zFastminer Version 2.2.6.
zFastminer has a highest hashrate on a poolside and optimized only for MiningPoolHub.
zFastminer works with nVidia Pascal/Volta GPUs with SM count >= 15.

Tested on Rigs with:
GTX 1070
GTX 1070 TI
GTX 1080
GTX 1080 TI - (8 GPU Rig Reports 33Mhs~48Mhs minimum on poolside on 24hr Graph)

Compiled with Cuda 9.1 (3rd patch) and SM 6.1(Pascal and Never GPUs, Please use current NVIDIA drivers with cuda 9.1 support).
Rigs with ~8 GPUS shows the best results!!!.

Important!!!
zFastminer will automatically calculate the best Intensity for each GPU based on it's SM count.
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee.
With zFastminer you should expect + 25%~35% increase in reported hash rate on poolside (MiningPoolHub).

Update:
Please use New WORKERNAME for this miner to fix rejected shares error.
_____________________________________________________________________

Downloads:

Download zFastminer-v2.3.4

Code:

https://file.fm/f/r3sym389

Download zFastminer-v2.3.3

Code:

https://file.fm/f/b7dwr5vw

Download zFastminer-v2.3.2

Code:

https://file.fm/f/dgqq53yn

Download zFastminer-v2.3.0

Code:

https://file.fm/f/5f9tmcwx

Download zFastminer-v2.2.9

Code:

https://file.fm/f/vnce927k

Download zFastminer-V2.2.85

Code:

https://file.fm/f/kevswzg2

Download zFastminer-V2.2.8

Code:

https://file.fm/f/fbbwb5rp

Download zFastminer-V2.2.6

Code:

https://files.fm/f/wwk3t8jg

Happy mining from our zFastminer team