It works!

Linux sees now 6 GPU, but when I install Multiminer, it can see only one GPU ;c

Hi everyone,

I can't connect 6 GPUs (Asus r9 290) to my motherboard MSI Z77A-G45.

I read these posts: https://bitcointalk.org/index.php?PHPSESSID=nbigpv5ko1uc856pi2et7jjpj1&topic=102547.msg1124000#msg1124000 and https://bitcointalk.org/index.php?topic=142241.msg1515460#msg1515460
and I know that it is possible to run 6 GPUs on that mobo.

Linux (ubuntu) can see max 5x cards when I short two middle x1 slots (http://pl.tinypic.com/view.php?pic=2qn48ip&s=8),  PCI-E pins like that https://ip.bitcointalk.org/?u=http%3A%2F%2Fblog.zorinaq.com%2Fimages%2Fpcie-short-schematic.png&t=536&c=8DJ_1hJYAKw0Ag


Hardware:
6gb DDR3
Intel G1610
3x PSU Corsair 750 W 80+gold


Could you help me to solve the problem?

Thank you in advance

Everything is ok now. I had  to wait  a moment

Thank you for your help!

Thank you for your reply! I added:

--temp-overheat 85,85,85 --temp-cutoff 93,93,93

Is it ok?


Edit: nothing happenes when one of cards reaches 86-88 degrees.

Hi guys,

I use Multiminer with my r9 290s on win7.   

Should I add something like --temp overheat -- to my Scrypt or Multiminer will do it without my help when my cards are overheated?

Hi everyone,

When I sell DOGECOINs on Cryptsy I can choose between BTC and LTC, but which crypto will be chosen when I autosell my Doges? LTC or BTC? Where can I choose it?


Thanks in advance,
regards

Hi everyone,

could anyone tell me if Templarius 1150W (80+ gold) is enough for 3x r9 290 (msi 4gd5)? (win 7, 4gb ram, intel g1610) or not?
I'd like to get about 870-875 kH/s per card.


Thank you in advance,
tsg

AeroCool Templarius 1150 W spokojnie, po co się bawić w 2 zasilacze
Ewentualnie jakiś X-Strike.

Hi everyone,

I have a problem with MultiMiner on two computers.

Hardware:
-Templarius 1150W
-MSI Z77A-G45
-3x MSI R9 290 4gb gddr5 (4gd5)
-RAM Kingston 4gb
-Processor Intel Celeron G1610 2,6 GHz

Software:
-Windows 7 64bit
-Multiminer 2.2.8 + bfgminer 3.9.0 (When I installed 2.3.0 or higher it blue screens when pressing stop button everytime). Good_shepherd had similar problem - https://bitcointalk.org/index.php?topic=248173.msg4213417#msg4213417
-Drivers (Catalyst Software Suite from http://support.amd.com/en-us/download/desktop?os=Windows%207%20-%2064 (so I have .net framework 4.5 installed too)
-LAN drivers
-Teamviewer
-AMD APP SDK (Do I have to install SDK? )

I also added commands: setx GPU_MAX_ALLOC_PERCENT 100 and setx GPU_USE_SYNC_OBJECTS 1 . I did not installed anything else.


Then I opened MultiMiner and started to configure it and I clicked START button.


It works but I can see 3-10 BSODs every day. Details: http://i44.tinypic.com/bgv0w5.jpg



// edit:
I have just seen Blue Sreen on the second device -  http://i43.tinypic.com/ri6wef.jpg

happy new year!

Hi everyone,

I use MultiMiner 2.2.8 (When I installed 2.3.0 or higher it blue screens when pressing stop button everytime). Good_shepherd had similar problem - https://bitcointalk.org/index.php?topic=248173.msg4213417#msg4213417 )
Hardware:
-Templarius 1150W
-MSI Z77A-G45
-3x MSI R9 290 4gb gddr5 (4gd5)
-RAM Kingston 4gb
-Processor Intel Celeron G1610 2,6 GHz



I installed Catalyst Software Suite (win 7) from http://support.amd.com/en-us/download/desktop?os=Windows%207%20-%2064 , amd app sdk 2.9 and intel management engine.

a aslo added: I also added: Start->Run->CMD setx GPU_MAX_ALLOC_PERCENT 100 and setx GPU_USE_SYNC_OBJECTS 1

I can see lots of blue screens every day.

Details:

http://i44.tinypic.com/bgv0w5.jpg



Thanks,

Ja kopę alty na kilku koparkach GPU, jak wszystko (nie daj Boże!) pierdyknie, to się chociaż sprzęt sprzeda za 70% ceny. A koparek do bitcoinów nikt nie kupi.


Pozdr