@MATHReX card is about 13 months old so it still should be, I throwed away original box tho. But I should have proof of purchase somewhere because I ordered it on amazon brand new.

@alucard20724 aight, I'll try it later today when I'm back home

As stated in title, I have few coupons for sale, with expire date on 31st of March. List goes as follow:

- 340$ coupon x5 - 45USD each
- 250$ coupon x5 - 35USD each
- 160$ coupon x5 - 20USD each
- 65% coupon x5 -  5USD each

Contact via PM forum only. Please send me PM with offers or send me your email by PM and I will respond to you via my gmail darodaredevil@gmail.com .

Accepting BTC , LTC , ETH , XRP

Have a nice day Smiley

Proof:
https://i.imgur.com/niPeLyZ.jpg

Hello folks,

I had spare GTX1060 which I used to mine with on my gaming setup. It was connected to motherboard via riser and I mined on it for about 6-8 months. The I was travelling with my pc so I left it completelly unplugged for around 7-8 weeks in my flat. Now I wanted to start mining with it again and as it turns out, it does not work. Here is what happens.

- when connected via riser, at PC boot it spins it fans for about 3 seconds, then stop and is not being recognised at all by PC
- when connected directly to PCI Express x16 slot on mb, result is the same

Steps that I took to try to fix the problem :
- I tried every available pci x1 slot with riser
- I tried 2 different pci x16 slots, didn't try slot nr 1 because gtx 1080 sits in it.
- Reinstalled gpu drivers each time I tried to install the card, did clean installation
- tried different configurations of power cables from my PSU\
- BIOS is up to date

GPU did work on this exact PC before. PC specs:

i7 7700k
Gigabyte Z270 Gaming7
16GB Coirsair Vengeance 3200 MHz
GTX1080 as main GPU
PSU         Corsair AX 650i
Original windows 10 pro, up to date

not working GTX1060 comes from K2FA, 6GB model

What did I miss?

Uhm, yes I did use the correct link.. But now I turned off vpn at all and I got connected with link you provided me. I feel dumb right now but thank you kindly, sir. I just wonder, why with PIA and TB vpn's I couldnt connect at all?

Ja kopię i HODLuje, za prąd płacę z pensji i mam nadzieję że w ciągu 1.5 roku będzie jakaś górka. Ale to już jest ryzyko jak wiadomo, bo górki może nie być a koszta są

So, few days ago I noticed I can't get on bitmain website, neither their shop or even their pool. Luckily I mine somewhere else, but it seems strange to me. I cleared cookiese, used two different vpn's, used different browserse and even different computer at work and home. Did I miss out on change of their website or what the heck? All I get from browser is " website not found"

it would be nice if you would NOT advertise in my thread. Create your own please.

W Polsce rozliczam tylko pit 36 - na 0 zł. Zagraniczne urzędy wymagają rozliczenia z macierzystego kraju.

Co do giełdy, nie wiem, jakoś nigdy nie przeszło mi przez myśl by  mieć konto na więcej niż jednej. Dzięki za podrzucenie pomysłu. Pamiętam że pierwsza zagraniczna której próbowałem nie akceptowała konta z PL i dlatego chyba wybrałem polski serwis./

Cześć,

do niedawna używałem Bitbay do drobnych transakcji i mozolnego ciułania zysków (bardziej jako hobby, żadnych botów itp). Po całej tej akcj z KAS tymczasowo wyciągnąłem środki z giełdy do portfeli i czekam na rozwój sytuacji. Czy ktoś wie kiedy Bitbay oficjalnie znajdzie się pod jurysdykcją malty? Powinienem skasować i założyć na nowo konto jeśli będę chciał tam znów dokonywać transakcji? Czy lepiej poszukać jakiejś innej giełdy?

Sęk w tym że obecnie mieszkam na stałe i pracuję za granicą, z Bitbayem łączyłem się zawsze z zagranicy , używając VPN (nie polskie IP), ale konto bankowe posiadam w Millenium (pracodawca nie wymaga lokalnego konta). Na dobrą sprawę nie wiem nawet czy mam powód do zmartwień, skoro jestem zameldowany w innym kraju, w takim razie PCC chyba nie powinno mnie dotyczyć w tym wypadku? Czy ktoś jest w podobnej sytuacji i mógłby się podzielić wiedzą?

Nope, only 100$ coupons left in stock. List of reliable escrows https://bitcointalk.org/index.php?topic=2439910.0

Correct me if I'm wrong but don't you need 1 PCI express line per  GPU (hence only PCI-e X1 being used for mining) so you also have to look for CPU with correct amount of lines?  So for example Intel Celeron G3930 would  be a no go.

Problem solved. Initially I tried to reset it like in manual, power up, press reset for 10 seconds, wait 5 minutes. That didn't work for me twice so what I did was

- power up
- wait 10 minutes
- press reset button for 15 seconds
- wait another 5-10 minutes
- Works afterwards.

Don't know, maybe earlier I pressed it for too short, or pressed reset incorrectly, but all in all after 3rd, longer attempt  factory reset occured and static ip setting reversed to DHCP.

hello,

by mistake I set my antminer L3+ to static ip instead of DHCP . Now I try to revert it but no succes. So far I tried:

- rebooting from ip ui
-  restoring to defaults,
- flashing new firmware
- hard resetting while holding ip report button.

When I try to acces Network tab, it just flat out refuses to go there, giving me Error connection timeout error. \

Please could someone help me and lead to right track on how to get back to DHCP mode? My other L3+ works with DHCP flawlesly.

From what I remember limit is 8 GPU per brand. I think it's limitation within Windows , not only within drivers. Thats why 13 card setup was so popular (8 NVIDIA +5 AMD). Maybe with new drivers you can have 8+8 but if you are looking to populate all slots you need to look for mining specific OS. Sadly can't recommmend you one, myself I never had to use one.

Updated the stock and added prices for remaining coupons.

Okay thank you for tips, I was thinking of taping inlets to fan aswell, because the middle miner was getting consistently to 80 C and shutting down, I guess too much hot air was just going around the pipe. On a side note - is it worth also to direct the outlet of power supply into the pipe for hot air or it's rather marginal in compare to heat output of antminer?

well this is how I set up the exhaust

https://imgur.com/a/1lN8nhu

Hello everyone.

I am setting up small farm up in my attic. Farm consistst so far from 3 Antminers S9 13.5TH and 7 Antminerse L3+. I have done few tests runs, and so far my main concern is temperature. I have made fairly small room around the stairs, 2x3 meters maybe and it'se heating up very fast. With 1 L3 and 3 S9's running room was going to +35 and S9's were shutting down. I made cutouts in walls and led termic pipes outside with hot air but it didn't solve the issue completelly. Fan I had set up as inlet from outside of building is nowhere near enough to provide enough cold air from outside. I am looking now to buy much more efficient fan for intake, but the question is, how much CFM I need? I read from many sources that single antminer S9 has around 210-230 CFM. I could not find any reliable information about l3+ but even if it's around the same (I think it's less than that) I need around 2300 CFM fan blowing air into the space.

Now the question is how much could air I should blow into the room. I was thinking about overkilling it a bit so in future I can increase the amount of machines. I am looking at 7960 m3/h fan which is around 4685 CFM. Is it too much? the fan is supposed to draw around 250 W but I think without it running all 10 miners would be impossible outside of winter ( middle east europe).

PS. Yes I know setting up mining operation in house is not efficient and problematic but I had no other place .

Hello everyone!

I have few Bitmain coupons for sale. As I understand, that trying to sell something with having only 1 post on forum is borderline impossible, I can use escrow service to make things secure for buyer or go first 1 by 1.

Currently I have on sale :
100 USD -> x 33   3 USD each

If you buy all of them in bulk, you will pay only 90 USD!.



Photo with coupons:

Contact via PM forum only. Please send me PM with offers or send me your email by PM and I will respond to you via my gmail darodaredevil@gmail.com .

Accepting BTC , LTC , BCH

Have a nice day

Edit. I just found out about 1PM limit per hour, so please bear with me, it will take me slightly longer than expected to set things up with escrow and buyer.

Updated stock