 Show Posts
|
|
Pages: [1]
|
|
1
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: RX580 22MHZ
|
on: June 25, 2018, 04:14:40 PM
|
|
Hello friends, I know many have hashrate problems after the windows 10 update, basically lost 3 or 4 hash points per card.
in my particular case, it goes down from 30.7 Mh / s to 27.5 Mh / s
I have 5 Msi Cards Rx-580 8Gb of which lost 16 Mh / s in total.
Too much for an ethereum Rig.
Solution.....
1 ° Back up all the information they have.
2 ° Have already downloaded the following Software.
-Windows 10 RS2 (1703 July 2017 - 64 bits)
-DDU v17.0.8.6
-winrar64
-Claymore's Dual Ethereum + Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak
AMD + NVIDIA GPU Miner v11.5
- [Guru3D.com] -MSIAfterburnerSetup442
-atikmdag-patcher-1.4.6
-Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
4 ° Install Windows 10 Pro
5 ° Configure Virtual Memory:
min: 16000
max: 32000 note: Depends on the number of cards they have in the Rig, upload the virtual memory.
6 Stop windows update service (the problem of installing windows RS3, is that it reaches a point where the update to RS4 is not the user's decision, but it is automatic and you can not say no, then the solution is RS2, since there you can choose to install later, and stop the Windows Update Service.
7 How to stop the Windows update service ?:
-press Windows key + R
-Once Open EXECUTE, write: services.msc and accept
-Find at the end of the list of services "windows Update" double click
-Type of Start: Disabled, Apply, Accept. Close.
8 ° configure power in Control Panel: Choose High Performance, review and put suspension status in "Never". (the screen of your choice)
9 ° Now there are some basic updates that are installed automatically when installing windows, vga motherboard sound drivers etc ...
a- Run DDU remove AMD graphics drivers installed by windows (Restart)
b- Install: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
c- install atikmdag-patcher-1.4.6
d- Install and Configure MSI Afterburner Setup 4.4.2
(my personal configuration is: 1300Mhz GPU Clock, 2200 Mhz Memory Clock.
Fan Speed 80% 45 ° C
e- Set Claymore 11.5 to Choice (already exists on 11.7) I prefer 11.5
There are multiple configurations of claymore, there is completely your choice, I chose the simplest and it works without any problem.
"EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.NAME -epsw x"
FINALLY EXECUTE START
MINING TO 31.3 MH / s
NOTE: OBVIOUSLY FIRST THERE MUST BE INSTALLED A MOD BIOS FOR THE MSI RX-580 8GB OR ANYTHING WHICH IS YOUR GRAPHIC CARD MARKS.
NOTE 2: FORGIVENESS FOR MY ENGLISH IS VERY BASIC.
GREETINGS FROM CHILE !!!
|
|
|
|
|
2
|
Alternate cryptocurrencies / Mining (Altcoins) / SOLUTION Ethereum Mining in Windows 10, Update, Lost 3 o 4 Mh/s x Card
|
on: May 29, 2018, 01:20:47 PM
|
|
Hello friends, I know many have hashrate problems after the windows 10 update, basically lost 3 or 4 hash points per card.
in my particular case, it goes down from 30.7 Mh / s to 27.5 Mh / s
I have 5 Msi Cards Rx-580 8Gb of which lost 16 Mh / s in total.
Too much for an ethereum Rig.
Solution.....
1 ° Back up all the information they have.
2 ° Have already downloaded the following Software.
-Windows 10 RS2 (1703 July 2017 - 64 bits)
-DDU v17.0.8.6
-winrar64
-Claymore's Dual Ethereum + Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak
AMD + NVIDIA GPU Miner v11.5
- [Guru3D.com] -MSIAfterburnerSetup442
-atikmdag-patcher-1.4.6
-Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
4 ° Install Windows 10 Pro
5 ° Configure Virtual Memory:
min: 16000
max: 32000 note: Depends on the number of cards they have in the Rig, upload the virtual memory.
6 Stop windows update service (the problem of installing windows RS3, is that it reaches a point where the update to RS4 is not the user's decision, but it is automatic and you can not say no, then the solution is RS2, since there you can choose to install later, and stop the Windows Update Service.
7 How to stop the Windows update service ?:
-press Windows key + R
-Once Open EXECUTE, write: services.msc and accept
-Find at the end of the list of services "windows Update" double click
-Type of Start: Disabled, Apply, Accept. Close.
8 ° configure power in Control Panel: Choose High Performance, review and put suspension status in "Never". (the screen of your choice)
9 ° Now there are some basic updates that are installed automatically when installing windows, vga motherboard sound drivers etc ...
a- Run DDU remove AMD graphics drivers installed by windows (Restart)
b- Install: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
c- install atikmdag-patcher-1.4.6
d- Install and Configure MSI Afterburner Setup 4.4.2
(my personal configuration is: 1300Mhz GPU Clock, 2200 Mhz Memory Clock.
Fan Speed 80% 45 ° C
e- Set Claymore 11.5 to Choice (already exists on 11.7) I prefer 11.5
There are multiple configurations of claymore, there is completely your choice, I chose the simplest and it works without any problem.
"EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.NAME -epsw x"
FINALLY EXECUTE START
MINING TO 31.3 MH / s
NOTE: OBVIOUSLY FIRST THERE MUST BE INSTALLED A MOD BIOS FOR THE MSI RX-580 8GB OR ANYTHING WHICH IS YOUR GRAPHIC CARD MARKS.
NOTE 2: FORGIVENESS FOR MY ENGLISH IS VERY BASIC.
GREETINGS FROM CHILE !!!
|
|
|
|
|
