23
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] Wyvern: THE FAIR LAUNCH GAMER'S COIN NIST5 PoW/PoS Make GPU's Great Again!
|
on: May 16, 2017, 05:46:05 PM
|
Well, just realized i've been a moron. Was running SG miner instead of CC miner on wyvern, just over doubled my hashrate in seconds :/ too bad I'd been mining for over a week.
I presume an nvidia card? I've been trying and failed to mine with sgminer on an AMD RX 480 8G. The PC reboots a second after I start sgminer.exe. Anyone care to share their .conf? Here's mine, although I've tried all sorts with the intensity, worksize, gpu-threads, etc... "intensity" : "18", "worksize" : "64", "kernel" : "nist5", "lookup-gap" : "2", "thread-concurrency" : "8192", "shaders" : "2560", "gpu-threads" : "2", "gpu-engine" : "1000-1000", "gpu-fan" : "30-80", "gpu-memclock" : "650", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" } Generally, instant-reboot stability issues can be tracked down to either bad PSU or card. Have you ruled out a BSOD by turning off Automatically Restart on System Failure under Startup and Recovery options? I should have specified actually, it is a BSOD. Error message system_service_exception and it references atikmdag.sys I've reinstalled drivers and searched the web for answers. None of what I have found helps. I don't think it's drivers as I can mine other coins OK, just not this nist5. My conf looks OK?
|
|
|
25
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] Wyvern: THE FAIR LAUNCH GAMER'S COIN NIST5 PoW/PoS Make GPU's Great Again!
|
on: May 16, 2017, 04:57:26 PM
|
Well, just realized i've been a moron. Was running SG miner instead of CC miner on wyvern, just over doubled my hashrate in seconds :/ too bad I'd been mining for over a week.
I presume an nvidia card? I've been trying and failed to mine with sgminer on an AMD RX 480 8G. The PC reboots a second after I start sgminer.exe. Anyone care to share their .conf? Here's mine, although I've tried all sorts with the intensity, worksize, gpu-threads, etc... "intensity" : "18", "worksize" : "64", "kernel" : "nist5", "lookup-gap" : "2", "thread-concurrency" : "8192", "shaders" : "2560", "gpu-threads" : "2", "gpu-engine" : "1000-1000", "gpu-fan" : "30-80", "gpu-memclock" : "650", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" }
|
|
|
27
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] Wyvern: THE FAIR LAUNCH GAMER'S COIN NIST5 PoW/PoS Make GPU's Great Again!
|
on: May 14, 2017, 08:55:26 PM
|
I'm having trouble building the wallet on Ubuntu 16 and Debian 8. Both give the same errors. On fresh installs of both OS's, I followed instructions here: https://github.com/nukeling/Wyvern/blob/master/doc/readme-qt.rstDependencies installed, as it says in those instructions. Then run qmake and make. I get error: src/net.cpp:19:32: fatal error: miniupnpc/miniwget.h: No such file or directory So I installed libminiupnpc-dev which has this file and run make again. Then I get: g++: error: /home/crypto/Documents/Wyvern/src/leveldb/libleveldb.a: No such file or directory g++: error: /home/crypto/Documents/Wyvern/src/leveldb/libmemenv.a: No such file or directory I installed libleveldb-dev which has both these files, but after running make I get that last error again. I copied the two files in the last error from their installed location to the specified locations in the error, then after running make I get: /home/crypto/Documents/Wyvern/src/leveldb/libleveldb.a(format.o): In function `leveldb::ReadBlock(leveldb::RandomAccessFile*, leveldb::ReadOptions const&, leveldb::BlockHandle const&, leveldb::BlockContents*)': (.text+0x570): undefined reference to `snappy::RawUncompress(char const*, unsigned long, char*)' collect2: error: ld returned 1 exit status Makefile:454: recipe for target 'wyvern-qt' failed make: *** [wyvern-qt] Error 1 Any advice folks? Thanks
|
|
|
32
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] MonetaryUnit [MUE] Quark based, CPU mining, faucet, explorer, pool, wallet
|
on: April 05, 2017, 09:42:53 AM
|
Hy MUE community, What is special on this coin ? Is it worth to invest in this coin - when yes, why ?
Hello, I believe the questions are worth answering if we want MUE to go up sooner or later but I will leave the answers to some more experienced users here. ;-) BUT... why not watch this: https://www.youtube.com/watch?v=nwPw0xn2qHI&feature=youtu.beCheers! The video says other cryptos are less reliable than MUE. What is it about MUE that makes it more reliable than the rest??
|
|
|
34
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BYTEBALL: Totally new consensus algorithm + private untraceable payments
|
on: April 03, 2017, 06:42:47 PM
|
Hey folks. This looks like a really interesting project. I'm keen to see where it goes.
I've got a couple of questions:
1. There will be or are 1,000,000,000,000,000 bytes, so that's 1,000,000 GBYTES, correct? 2. Are blackbytes traded anywhere? What will be the coin supply of blackbytes? 3. Do I need to link a Bitcoin address for the next distribution round, if I have already linked that address for the last round?
TIA.
|
|
|
38
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] AEON 2nd gen cryptonote, anon, mobile-friendly, scalable, pruning
|
on: February 08, 2017, 10:58:16 AM
|
What are the plans for a GUI? Will we see Monero's GUI wrapped in Aeon blue any time soon, or is the focus on the other work? (i.e. tx mixins, pruning, kovri, etc)
|
|
|
40
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][UBQ] Ubiq - Smart Contracts For An Automated World
|
on: February 04, 2017, 09:54:23 PM
|
Please show an example of the CLI commands that would send the coins. I try by analogy with ETH, but make a mistake somewhere.
Examples below when connected via CLI: 1. Sending 0.05 UBQ from my 1st account to my 2nd account: eth.sendTransaction({from: eth.accounts[0], to: eth.accounts[1], value: web3.toWei(0.05, 'ether')}) 2. Sending 0.05 UBQ from my 2nd account to some other UBQ address: eth.sendTransaction({from: eth.accounts[1], to: '0x8659d3c274c29aac6711aeddf9b6fada40f4efa6', value: web3.toWei(0.05, 'ether')}) Edit: you may need to unlock the account, before you enter the above commands: personal.unlockAccount(eth.accounts[0])
|
|
|
|