 Show Posts
|
|
Pages: [1] 2 »
|
My S2 is working now!! I noticed a chunk of glue(?) in the slot with the main card. I removed it and reseated the card and now everything works! The two Ethernet lights on the outside of the S2 and the two on my router are always off, when it is powered on. Do you mean the internal Ethernet cable that is attached to the main (middle) board? 8 of the 11 cards were not seated properly.  However, after re-seating, there is still no display and no lights on my router from the Ethernet connection. I've already done a second pass at re-seating, and the internal Ethernet and ribbon cable are connected fine...any other ideas? Since the display isn't lit, does that suggest a power terminal isn't connected or that the main board is fried?  At least the fans make an impressive sound.  I got my S2 today.
However, the display does not light up. Although the fans do turn on and I can see red lights inside it.
Also, the Ethernet is not detected by my router.
So the consensus is that I should open it up and see if anything needs to be reseated? Will this void the warranty?
Thanks!
Volgon
Check that all cards and cables are seated properly. check lights on controller's ethernet port |
|
|
|
The two Ethernet lights on the outside of the S2 and the two on my router are always off, when it is powered on. Do you mean the internal Ethernet cable that is attached to the main (middle) board? 8 of the 11 cards were not seated properly. However, after re-seating, there is still no display and no lights on my router from the Ethernet connection. I've already done a second pass at re-seating, and the internal Ethernet and ribbon cable are connected fine...any other ideas? Since the display isn't lit, does that suggest a power terminal isn't connected or that the main board is fried? At least the fans make an impressive sound. I got my S2 today.
However, the display does not light up. Although the fans do turn on and I can see red lights inside it.
Also, the Ethernet is not detected by my router.
So the consensus is that I should open it up and see if anything needs to be reseated? Will this void the warranty?
Thanks!
Volgon
Check that all cards and cables are seated properly. check lights on controller's ethernet port |
|
|
|
8 of the 11 cards were not seated properly. However, after re-seating, there is still no display and no lights on my router from the Ethernet connection. I've already done a second pass at re-seating, and the internal Ethernet and ribbon cable are connected fine...any other ideas? Since the display isn't lit, does that suggest a power terminal isn't connected or that the main board is fried? At least the fans make an impressive sound. I got my S2 today.
However, the display does not light up. Although the fans do turn on and I can see red lights inside it.
Also, the Ethernet is not detected by my router.
So the consensus is that I should open it up and see if anything needs to be reseated? Will this void the warranty?
Thanks!
Volgon
Check that all cards and cables are seated properly. |
|
|
|
|
I got my S2 today.
However, the display does not light up. Although the fans do turn on and I can see red lights inside it.
Also, the Ethernet is not detected by my router.
So the consensus is that I should open it up and see if anything needs to be reseated? Will this void the warranty?
Thanks!
Volgon
|
|
|
|
|
Any coin trading for 1 satoshi is
0.00000001 x 1 million coins = 0.01 BTC = $US 6.50
ContinuumCoin CTM on coinex.pw is there now.
Maybe Magic Internet Money or Topcoin might work too.
|
|
|
|
 LMEpqe7Z9zX7ksBLuJAET4DgDwcoWD5DsD 12egc5LGKLotVHG2VvE5iCjsfo3LR1eF53 |
|
|
|
I think that they were trying to include all the complied files. Only run the ...qt.exe (wallet). One thing lacking about Magic Internet Money: not enough memes  LMEpqe7Z9zX7ksBLuJAET4DgDwcoWD5DsD Ok in the MiM-win32 file do I run "magicinternetmoney-qt.exe" or "magicinternetmoney-0.8.6.1-win32-setup.exe"
magicinternetmoney-qt.exe to run the wallet. I'm assuming the "win32-setup.exe" is to install, but I don't know why they are putting that in the ZIP file. They need to take that out and offer it as a separate download on the website. Not sure if it's intentional or not. |
|
|
|
 LMEpqe7Z9zX7ksBLuJAET4DgDwcoWD5DsD |
|
|
|
Sent MIM for your fund to buy me a new keyboard. Love the raptor. |
|
|
|
 LMEpqe7Z9zX7ksBLuJAET4DgDwcoWD5DsD |
|
|
|
 LMEpqe7Z9zX7ksBLuJAET4DgDwcoWD5DsD |
|
|
|
 LMEpqe7Z9zX7ksBLuJAET4DgDwcoWD5DsD |
|
|
|
|
Please check your Getting Started page for ANT.
Are the stratum address and port correct?
[/quote]
Yeah, it says goat.majorminors.com (which should be ant?) and I'm guessing the port is right, as goat is 3333.
|
|
|
|
Dogemoon just went down. Switching to something reliable (middlecoin) for the night. I'm not going to leave anything pointed at this mess overnight.  |
|
|
|
|
Block 996...
And everything is fine on smc.hash.so...
My wallet seems good...
I'm switching my main miner over there too.
Good luck!
SixQotTRrG8B9iupkP2nti6CgqqgXZkFD8
|
|
|
|
|
Block 909...it's coming soon...
Things still seem good on smc.hash.so...
Good luck!
SixQotTRrG8B9iupkP2nti6CgqqgXZkFD8
|
|
|
|
|
Mining without a problem @ smc.hash.so
SixQotTRrG8B9iupkP2nti6CgqqgXZkFD8
Thanks!
|
|
|
|
|
FNVTsHU4FVy8Pqre76fqzb9gWUbMptREMx
Thank you!
|
|
|
|
|
DABbM7E4BHWbYVackNQxEDf72uc9a1MpDE
Much receive thx!
|
|
|
|
|
