Bitcoin Forum
January 28, 2022, 08:36:45 AM *
News: Vote on the 2021 community awards
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 »
1  Economy / Computer hardware / Re: [FOR SALE - SIDEHACK STICK] GekkoScience 2PAC - 2x BM1384 USB Stick Miner on: February 14, 2017, 04:40:19 AM
damn, forgot about this. had life going on............ its there at least 2 left? Ill pay for them right now via paypal.
2  Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs on: December 16, 2016, 04:32:39 AM
I'll make sure it's compatible with S3 housings too. The thing will be USB-connected, so it might take a header adapter or something to still plug into the boards inside the case but I'll make sure it's possible. S1 and S5, being fairly open, should have no trouble.


S3 to S5 is the same other than the location of the pcie plugs. On the s5 boards the pcie plugs are slightly further apart and a bit lower.

It would be nice to use a s3 cover without any mods but Im sure most would be fine without the cover. Honestly one could just run the plugs in there before they close it up or a jumper cable mounted to the cover. Not a big deal IMO.
3  Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs on: December 16, 2016, 02:29:02 AM
Do you have a running list for the 2pacs yet? I want to order a few while I have the cash in hand and will get the BF stuff once taxes come in. I want at least 2 minimum so I can run one modded/oc'd against the modded OG stick and one to leave untouched.
4  Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs on: December 04, 2016, 07:27:10 PM
Because of buck overheads and other things, the low-end hashing efficiency of the 2-chip BM1384 would only be at best a marginal improvement over the existing Compac. However, overclocking is where it'll really shine. The old stick's 5W performance was around 12GH, where 15GH is hopefully a conservative estimate for this one; 7W should see over 20GH instead of 16GH and the top-end 10W would get you about 27GH instead of the old stick's maybe hitting 20GH if it didn't burst into flames. Cooling should also be better because of the reduced heat density of two chips.

Looking foreword to this to push it to the max, hope it don't let out the magic smoke. I will at least get 2, one for normal mining and one for "testing". The one chip compac didn't seem to get too hot anywhere as far as I pushed it. Only had the IR temp gun but I think it did very well considering I topped it out at around 25+Gh.
5  Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs on: November 25, 2016, 02:01:13 PM
Tentative pricing for a Bitfury 16nm pod is around $125. My reseller friends are worried that >$100 is too much for a pod miner. With an estimated stock setting of about 650GH at 75W DC, would folks still buy it? That's priced high even by Avalon721 standards, but it also has better efficiency - and with integrated undervolting, it can get better still.

I'm still mining with 2 s5s, the wattage difference alone would pay for themselves quickly. 150 watts for the same speed as an s5 yet quieter, yes please. If I have the funds I will surely take a few.
6  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 1% fee solo mining USA/DE servers 218 blocks solved! on: November 24, 2016, 12:45:29 PM
My s5s wont connect, I have tried re entering the info and power cycling. They report the pool as dead.....

same here.. dead.

Pool was fine, gateway was unhappy about restart but it's fixed now.

Im up and running again. Thanks -ck.
7  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 1% fee solo mining USA/DE servers 218 blocks solved! on: November 24, 2016, 04:13:24 AM
My s5s wont connect, I have tried re entering the info and power cycling. They report the pool as dead.....
8  Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs on: November 05, 2016, 03:59:33 AM
It'll be built off the well-tested BM1384 Compac power design, with some improvements to improve stability at extreme overclocking, and with an entirely new controls set that should allow for temperature monitoring and software voltage adjustment.


Oh boy, cant wait to see what I can do with this. Had a bunch of fun pushing the 1384 compac with that huge modded heatsink with a fan. If you can build it....I can push it to the edge! GL
9  Alternate cryptocurrencies / Mining (Altcoins) / Re: A4 Dominator, the 14nm LTC ASIC/Miners, sample tested and open for pre-order on: October 15, 2016, 12:11:08 AM
I do not know if this listing is legit and I am no way connected

but I thought I would share this A4 listed on ebay 136Mhs@520W
(you get 2 units per buy it now) says its in hand

http://www.ebay.com/itm/A4-Dominator-280Mh-s-Litecoin-miner-like-zeus-thunder-x3-gridseed-a2-terminator-/112167146124?hash=item1a1daed28c:g:qDAAAOSwNRdYAUzz
10  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 1% fee solo mining USA/DE servers 207 blocks solved! on: October 10, 2016, 09:10:25 PM
Have been solo mining for over a year with 2 s5's. Literally had a share on the first block of a diff change that would of hit a block less than 10 minutes earlier.
11  Economy / Computer hardware / Re: WTB six S5 miners, doesn't matter if they work on: October 06, 2016, 06:44:51 PM
I still have about 1 boards worth of pulled chips. Pm me an address and ill see if i can get em out tomm.
12  Economy / Currency exchange / Re: [H] BTC [W] PP ~~TRUSTED ONLY + ESCROW ~~ on: June 11, 2016, 12:12:16 AM
I can exchange for some of it, take a look at my trust!
13  Economy / Computer hardware / Re: [WTS] [US] USB stick miners and hubs, oh my! on: June 07, 2016, 02:09:40 PM
replied. im always looking to buy redfury sticks.
14  Economy / Computer hardware / Re: [WTS] [US] USB stick miners and hubs, oh my! on: June 06, 2016, 10:29:15 PM
pm'd
15  Economy / Computer hardware / Re: [WTB] uart to usb dongle for Avalon 6 on: April 18, 2016, 12:02:50 AM
Go to ebay and look up usb to uart. Just connect similar pins with the included jumper wires.

edit: If you look I'm sure some one here has a thread on it.
16  Economy / Computer hardware / Re: Need S5's trade for GTX 980 on: April 09, 2016, 12:46:34 AM
Here is a pic before I restart them to put them on a power meter.



17  Economy / Computer hardware / Re: Need S5's trade for GTX 980 on: April 08, 2016, 02:31:39 PM
Yea, they are clocked at 275 iirc. I can check when I get home from work. They both have 2 fans so I can run them quieter,  one of them I swapped s3+ heatsinks and it made a world of difference in temps. I can get a wattage reading as well when I get home.
18  Economy / Computer hardware / Re: Need S5's trade for GTX 980 on: April 08, 2016, 02:15:40 AM
I have 2 s5s that have been running under clocked for 5+ months and cleaned regularly. I have owned them since may/june 2015

http://solo.ckpool.org/users/1PJ63JUfX6q8CfLUorQwMxzkkXBDXfFq7m
19  Economy / Computer hardware / Re: [WTB] 2 * KNC neptune controlling boards on: April 04, 2016, 02:12:28 PM
I have 3 control boards, 1 works for sure and i can test the other 2. I need at least 1 for myself, pm me a offer.
20  Economy / Computer hardware / Re: [WTB] - defective reference design AMD gpus on: March 30, 2016, 10:55:36 PM
ref R9 290X 4GB the heat sink mounting holes (4 around gpu die) are stripped so the back chrome mount only mounts with 1 screw. Bought it in untested condition for my gaming rig and haven't fully tested it due to that reason. I know it has no display and the fan spins aside from that it could be bios, mosfets or something stupid.
Pages: [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 »
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!