Show Posts
|
Pages: [1] 2 »
|
Ja das musste leider geändert werden, denn man hätte es ansonsten massiv ausnutzen können.
Sonst würden halt die Bestellungen explodieren und 200 Ghash/s würden sich auf 3000 Anteile aufteilen müssen..
Jop verstehe ich. Wäre aber das einzige gewesen, welches für mich persönlich Sinn gemacht hätte. Dann kann ich mir lieber nen eigenen 5Ghash bestellen, wenn ich eh zu warten habe bis AnnoTuck. Kommt einen billiger + nur BFL als Risiko. Da der eigene Miner eh im Keller läuft machen es dann die paar Watt Strom auch nicht mehr. Danke für eure Antworten!
|
|
|
Wie läuft die Auszahlung ab, wenn volle 300 Anteile verkauft, aber z.B. nur 120 GH/s durch die Lieferung von zwei Geräten verfügbar sind? Werden dann die generierten Coins auf alle Anteilseigner verteilt?
Hallo, darüber habe ich mir sehr bereits sehr intensive überlegungen gemacht. Bei dem von dir beschriebenen Fall würde die generierten Bitcoins dann durch alle 300 anteile geteilt. ok dann habe ich den post wohl falsch verstanden danke euch
|
|
|
Hi, bin interessiert an einigen Anteilen.
Verstehe ich das richtig, dass sobald die erste BFL Hardware da ist nehmen wir mal an 65Gh/s dies auf alle Anteile aufgeteilt wird?
also 65 / 790(aktuell) = ca. 82,27 Mh/s pro Anteil?
Oder habe ich etwas falsch verstanden.
Schöne Grüße
|
|
|
I have another bigger project I'm currently working on, With my time less available and the lack of monetary gain from donations my interest has hmmm I think I should say has "disinclined" a tid-bit, I should have some testing and the release done by Saturday or so. Thank for your patience Hmm okay ^^ But may rethink that. :> In my case i donated nothing cause i have nothing that is working. I cant go live at the moment so... i have nothing i could spend. greetings
|
|
|
Hi Xen, we want to release soon. When you will have fixed the outstanding reward and cashout bugs? best regards P.S and please add the block status invalid. { "account" : "", "category" : "orphan", "amount" : 50.25293224, "confirmations" : 0, "txid" : "790c5494c0a26a520c3cffc0dae536173bedfd4ef512b65db9bbf5613d68f0bb", "time" : 1309191321 } ]
|
|
|
Running 4.1.51. Here's a few things that don't seem to be working:
1. Miner stats - shows 0 speed all the time 2. Pool stats (front page) 3. Blog posts are missing 4. ./json/poolstats.php link doesn't exist 5. payment calculcations seem to be inconsistent/incorrect. I'm running on testnet and have solved 3 blocks. The pool is set to charge a 1% fee. The statistics page says my payment for each block is 45BTC (135 total) yet my balance is at 103BTC (doesn't make sense??). And actually as I was typing this I refreshed my pool page and my balance has just dropped to 101BTC??? Auto payment is set to 0.
Cheers
EDIT: and now it's dropped to 100BTC lol. Something is stealing my balance....
1. is working for me 2. is working for me 3. is working for me 4. has never exists 5. he knows that and he is working on it some more bugs @ payout if(isSet($getCredentials->sendAddress)){ echo $getCredientials->sendAddress; }else{ Typo Bug And: //Does this accountbalance meet the `cashoutMinimum` $accountBalance = $getCredientials->accountBalance; $cashOutAddress = $getCredientials->sendAddress; $userId = $getCredientials->userId; $cashOutMin = getCashoutMin(); echo $cashOutAddress; Dont know why but $accountBalance, $cashOutAddress are empty :O at this point. Dont found why
|
|
|
Bug. Rewards function.php //Get estimated earnings $estReward = 0; if($totalPoolShares > 0 && $totalShares > 0){ $estReward = $totalPoolShares/$totalShares; } should be //Get estimated earnings $estReward = 0; if($totalPoolShares > 0 && $totalShares > 0){ $estReward = $totalShares/$totalPoolShares; } still not fixed in 4.1.51 the pool will reward more than 50BTC with this code $pendingBalance is without any function. still have the reward bug that i hve explained in PM. THANKS for the disable TH option. :>
|
|
|
Bug. Rewards function.php //Get estimated earnings $estReward = 0; if($totalPoolShares > 0 && $totalShares > 0){ $estReward = $totalPoolShares/$totalShares; } should be //Get estimated earnings $estReward = 0; if($totalPoolShares > 0 && $totalShares > 0){ $estReward = $totalShares/$totalPoolShares; }
|
|
|
Hi, That would be nice. And i think each user can choose itself implement a form like for withdraw -> send to jackpot an amount X.X or an selfchoosed automatic percentage on each round in the lottery. if the jackpot pays out you send it back to the farm and the user get it in his balance.
But if you run it yourself my pool cant participate to this. cause we are farming namecoins :>
|
|
|
Hi, do you have tested your code?
TotalHashes arent working anymore. :>
May you use "spline" instead of "line" on the charts. it looks realy better. use this code xen: http://nopaste.info/46f62a7fde_nl.htmlits showing the stats even you're logged out. P.S. A lottery modul? Hmm i would not use it but would be nice.
|
|
|
Hi, do you have tested your code?
TotalHashes arent working anymore. :>
|
|
|
Hi, yes i have seen this changelog. But i cant see any sqltable changing. Because of that is was asking. :>
I will update now.
|
|
|
Hi, Thanks phorensic But Xenland is rocking more @xenland before i update my version. anything to do at the database? or just that? ALTER TABLE `stats_poolMHashHistory` ADD `totalMhash` INT( 50 ) NOT NULL secondary it is maybe useful to write it down at the first post if someone want to make an update. best regards
|
|
|
I will not try that ^^ i think that xen will implement this later itself. Now for the Total Hash Rate of the Pool: 1. SQL insert ALTER TABLE `stats_poolMHashHistory` ADD `totalMhash` INT( 50 ) NOT NULL 2. now open statsUpater.php replace: //Get average Mhash for the entire pool $poolAverageHashQ = mysql_query("SELECT `mhashes` FROM `stats_userMHashHistory` WHERE `mhashes` > 0 AND `timestamp` = '".$globalTime."'"); $numPoolHashRows = mysql_num_rows($poolAverageHashQ); $averagePoolHash = 0; while($poolHash = mysql_fetch_array($poolAverageHashQ)){ $averagePoolHash += $poolHash["mhashes"]; } if($averagePoolHash > 0 && $numPoolHashRows > 0){ $averagePoolHash = $averagePoolHash/$numPoolHashRows; } //Add pool average to table mysql_query("INSERT INTO `stats_poolMHashHistory` (`timestamp`, `averageMhash`) VALUES('$globalTime', '$averagePoolHash')"); with: //Get average and total Mhash for the entire pool $poolAverageHashQ = mysql_query("SELECT `mhashes` FROM `stats_userMHashHistory` WHERE `mhashes` > 0 AND `timestamp` = '".$globalTime."'"); $numPoolHashRows = mysql_num_rows($poolAverageHashQ); $averagePoolHash = 0; $totalPoolHash = 0; while($poolHash = mysql_fetch_array($poolAverageHashQ)){ $averagePoolHash += $poolHash["mhashes"]; $totalPoolHash += $poolHash["mhashes"]; } if($averagePoolHash > 0 && $numPoolHashRows > 0){ $averagePoolHash = $averagePoolHash/$numPoolHashRows; } //Add pool average and total to table mysql_query("INSERT INTO `stats_poolMHashHistory` (`timestamp`, `averageMhash`, `totalMhash`) VALUES('$globalTime', '$averagePoolHash', '$totalPoolHash')"); save. 3. open index.php and replace it with this one: http://nopaste.info/46f62a7fde_nl.html4. Looks like that: http://imageshack.us/photo/my-images/864/chartz.png/
|
|
|
I dont think that the code has been tested. Working for a patch now to see the whole Pool Rate over time.
At the moment we can see only averages. More interesting is the total rate i think.
|
|
|
Hi, if you're logged out. And watch your Mainpage. You'll see your Average PoolRate(Graph) but without any timestamps. They are all on zero.
And btw if you change "DESC" to "ASC" in the mysql statements on line ~59 and ~87 (index.php) the timeline is "normal" from left to the right.
|
|
|
Change (index.php) else if($numRows == 0){ $i=0; //Go through the pool history and display that $poolHistory = mysql_query("SELECT `averageMhash`, `timestamp` FROM `stats_poolMHashHistory` WHERE `timestamp` >= '".$fiveMinutesAgo."' ORDER BY `timestamp` DESC"); while($poolHash = mysql_fetch_array($poolHistory)){ if($i > 0){ $poolHashArray .=","; $timeHashArray .=","; } $i++; $poolHashArray .= $poolHash["averageMhash"]; $timeHashArray .= "'".date("G:i:s", $time["timestamp"])."'"; } to else if($numRows == 0){ $i=0; //Go through the pool history and display that $poolHistory = mysql_query("SELECT `averageMhash`, `timestamp` FROM `stats_poolMHashHistory` WHERE `timestamp` >= '".$fiveMinutesAgo."' ORDER BY `timestamp` DESC"); while($poolHash = mysql_fetch_array($poolHistory)){ if($i > 0){ $poolHashArray .=","; $timeHashArray .=","; } $i++; $poolHashArray .= $poolHash["averageMhash"]; $timeHashArray .= "'".date("G:i:s", $poolHash["timestamp"])."'"; }
its fixing the zero time at index.php (if logged out)
|
|
|
Hi, im just wondering of the low rate of bug reports. i reinstalled it 4 times now cause i think im on the wrong way. but no it doesnt work like expected. It is to much to explain right now cause i hve to go to work. See you later. PS: Do you need any programmer? I'm here for any help. bug: 4.0.3 $getRoundSharesQ = mysql_query("SELECT `id FROM `shares_history` WHERE `blockNumber` = '".$block["blockNumber"]."' AND `username` = '$username.%' AND `our_result` != 'N'"); replace with: $getRoundSharesQ = mysql_query("SELECT `id` FROM `shares_history` WHERE `blockNumber` = '".$block["blockNumber"]."' AND `username` = '$username.%' AND `our_result` != 'N'");
|
|
|
Hi, we are testing atm. - I cannot save at the "website preferences" / have it do over mysql - Workers cant be deleted - Is the Mysql file realy correct? Never seen something like "<<<<<<< HEAD" same as "=============" in a dump. / Sql cant read the file i have to put anything in the db manually - The Design is broken on IE - Pool stats are going from the right to the left? used the files on first page. Download today. and is this: *Strong encrypted session cookies *Auth pin needed to change certain aspects of user profile *Instant pay out *Stats will calculate when the next block will be found and graphs the estimated time *Email Validation *Percentage Fee option *HTML is written with Style Sheets in mind *Out of the box translation support *Flexible administrator panel *API support for workers status. *Native support for TradeHill bitcoin worth, along with a "Potential Balance" display that displays your account balance with the current worth *Live WYSIWYG Blog post and Admin page editors allready implemented? where i can set the fee? (only in the database?) best regards
|
|
|
Yep i had the same problem. Running Running Running and its doing nothing.
Your little skript works very well. thanks
|
|
|
|