Bitcoin Forum
May 15, 2021, 08:33:22 PM *
News: Latest Bitcoin Core release: 0.21.1 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1] 2 3 4 »
1  Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.1c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) on: September 21, 2020, 12:29:24 PM
With the newest 456.38 nvidia drivers it gives me NVML errors all over the place.
2  Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.1c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) on: September 19, 2020, 06:25:47 PM
I cannot get straps working on my P106s even with -nvmem 1 option. It just ignores it. Somebody can help maybe?
3  Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.0e: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) on: August 02, 2020, 04:56:43 PM
Is there a possible fix for nVidia hashrate drop or it must be implemented in the drivers itself?
4  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ fast Equihash miner 144,5 150,5,3 125,4 192,7 210,9 150,5 BeamHashIII 96,5 on: July 29, 2020, 08:42:35 AM
Hi MineOrDie,
Thank you for all the feedback. It is really important since it helps us to make miniZ better.

We could not reproduce this issue. Have you tried to run it with --oc1 or --oc2? Also, does it work if you run with less GPUs?
(Btw, f11 was only working for 144,5, it was removed on version 1.5u and now it is ignored.)

It is a bit frustrating for us when we cannot reproduce the issues, it becomes much harder to fix them.
We'll keep looking into this.
Cheers
Code:
miniZ<125,4>[14:0:00:2904]: Selecting GPU#1[1] GeForce GTX 1060 3GB
miniZ<125,4>[14:0:00:2904]: Selecting GPU#5[5] GeForce GTX 1060 3GB
miniZ<125,4>[14:0:00:2904]: Selecting GPU#3[3] GeForce GTX 1060 3GB
miniZ<125,4>[14:0:00:2904]: Selecting GPU#2[2] GeForce GTX 1060 3GB
miniZ<125,4>[14:0:00:2904]: Selecting GPU#4[4] GeForce GTX 1060 3GB
miniZ<125,4>[16:0:00:2814]: Selecting GPU#0[0] GeForce GTX 1060 3GB
[FATAL  ] Cannot load deviceZ code.
[INFO   ] Disconnecting from zel.2miners.com
[INFO   ]zel.2miners.com Stopping miner
[INFO   ] Miner monitor exited.

That's OC1. OC2 works, but I see no improvement over 1.5t2.
About running with less GPUs - I cannot try that. I'm only able to remote control my rigs at the moment. Maybe set the miner only to use 1 GPU.
5  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ fast Equihash miner 144,5 150,5,3 125,4 192,7 210,9 150,5 BeamHashIII 96,5 on: July 28, 2020, 05:24:51 PM

Well, it's a hell of an unstable kernel then. I cannot even run it on 0 / 0. Just adjusting my power. I'm reverting back to 1.5t2. Can you test it out on a 1060 3GB?
Hi MineOrDie,
Do you also have issues with t3?
Thanks for your feedback, we are going to look into it carefuly.
Cheers
Nope, t3 has that strange memory allocation bug on 3GB cards mining ZEL. Then I think there was another version that had a bug that caused the miner to operate in mode 10 even if I'm running Windows 8.1.
The latest one fixed everything, but it's a mess again...
I know you work hard, so really appreciate it.
6  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ fast Equihash miner 144,5 150,5,3 125,4 192,7 210,9 150,5 BeamHashIII 96,5 on: July 28, 2020, 08:06:30 AM
Mining ZEL on 1060 3GB, Windows 10, latest drivers.

Code:
[FATAL  ] GPU[4]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[1]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[2]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[0]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[3]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[5]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[INFO   ] Disconnecting from zel.2miners.com
[INFO   ]zel.2miners.com Stopping miner
[INFO   ] Miner monitor exited.
[INFO   ] Exited main loop

Can you help me out? Same OC settings like on 1.5.

Hi MineOrDie,
These CUDA errors you're getting really seam related to OCs.
Because we did changes to the kernels it can happen that some adjustments to the OC are required too.
It is possilbe that it became unstable to only one of the GPU. You can start by adjusting the first one that gave the error, however if the rig crashes again maybe it is good to adjust the others.
Let us know if you managed to make it more stable.
Cheers
Well, it's a hell of an unstable kernel then. I cannot even run it on 0 / 0. Just adjusting my power. I'm reverting back to 1.5t2. Can you test it out on a 1060 3GB?
7  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ fast Equihash miner 144,5 150,5,3 125,4 192,7 210,9 150,5 BeamHashIII 96,5 on: July 26, 2020, 08:06:47 PM
Mining ZEL on 1060 3GB, Windows 10, latest drivers.

Code:
************ miniZ v1.6v5 ************
Number of CUDA[10.0] devices found: 6
Algo:           EQ[125,4]
Pool#0:         user[t1SNnYcs4Z4u9uKPLDMfBzVWfDbtkCs8Pwb.RIG2-1060GAMINGX-3GB]
                server[zel.2miners.com] port[19090] ssl[yes] pers[ZelProof]
Optimisation:   f11[0 1 2 3 4 5]
Temp. limit:    [90C]
miniZ<125,4>[00:0:00:2904]: Selecting GPU#3[3] GeForce GTX 1060 3GB
miniZ<125,4>[00:0:00:2904]: Selecting GPU#5[5] GeForce GTX 1060 3GB
miniZ<125,4>[00:0:00:2904]: Selecting GPU#2[2] GeForce GTX 1060 3GB
miniZ<125,4>[16:0:00:2807]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[00:0:00:2904]: Selecting GPU#1[1] GeForce GTX 1060 3GB
miniZ<125,4>[00:0:00:2904]: Selecting GPU#4[4] GeForce GTX 1060 3GB
[ 0d 0h 0m06s] S:  0/0 237(236.7)Sol/s 137(137.1)W [zel.2miners.com]- 38ms
 0>GTX 1060 3GB S:  0/0 [43C/44%] 0.00 I/s 0.0(0.0)Sol/s  24( 24.1)W clk=1328MHz mclk=3007MHz Sol/W=0.00
 1>GTX 1060 3GB S:  0/0 [43C/43%] 0.00 I/s 0.0(0.0)Sol/s  23( 23.4)W clk=1379MHz mclk=3007MHz Sol/W=0.00
 2>GTX 1060 3GB S:  0/0 [39C/40%] 0.30 I/s 0.8(0.8)Sol/s  22( 21.5)W clk=1366MHz mclk=3007MHz Sol/W=0.04
 3>GTX 1060 3GB S:  0/0 [44C/44%] 0.00 I/s 0.0(0.0)Sol/s  23( 22.6)W clk=1303MHz mclk=3007MHz Sol/W=0.00
 4>GTX 1060 3GB S:  0/0 [42C/42%] 0.00 I/s 0.0(0.0)Sol/s  23( 22.8)W clk=1366MHz mclk=3007MHz Sol/W=0.00
 5>GTX 1060 3GB S:  0/0 [45C/45%] 0.30 I/s 0.8(0.8)Sol/s  23( 22.6)W clk=1316MHz mclk=3007MHz Sol/W=0.03
[ 0d 0h 0m10s] S:  0/0 224(224.3)Sol/s 137(137.1)W [zel.2miners.com]- 38ms
 0>GTX 1060 3GB S:  0/0 [43C/44%] 7.95 I/s 15.9(15.9)Sol/s  24( 24.1)W clk=1328MHz mclk=3007MHz Sol/W=0.66
 1>GTX 1060 3GB S:  0/0 [43C/43%] 8.96 I/s 17.9(17.9)Sol/s  23( 23.4)W clk=1379MHz mclk=3007MHz Sol/W=0.76
 2>GTX 1060 3GB S:  0/0 [39C/40%] 8.40 I/s 16.8(16.8)Sol/s  22( 21.5)W clk=1366MHz mclk=3007MHz Sol/W=0.78
 3>GTX 1060 3GB S:  0/0 [44C/44%] 8.49 I/s 16.9(16.9)Sol/s  23( 22.6)W clk=1303MHz mclk=3007MHz Sol/W=0.75
 4>GTX 1060 3GB S:  0/0 [42C/42%] 0.00 I/s  0.0( 0.0)Sol/s  23( 22.8)W clk=1366MHz mclk=3007MHz Sol/W=0.00
 5>GTX 1060 3GB S:  0/0 [45C/45%] 8.63 I/s 17.2(17.2)Sol/s  23( 22.6)W clk=1316MHz mclk=3007MHz Sol/W=0.76
[FATAL  ] GPU[4]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[1]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[2]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[0]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[3]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[FATAL  ] GPU[5]: CUDA error 6 'the launch timed out and was terminated' in line 1380
[INFO   ] Disconnecting from zel.2miners.com
[INFO   ]zel.2miners.com Stopping miner
[INFO   ] Miner monitor exited.
[INFO   ] Exited main loop

Can you help me out? Same OC settings like on 1.5.
8  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, fast & friendly Equihash 144,5 150,5,3 125,4 192,7 210,9 150,5 96,5 miner on: June 22, 2020, 03:10:12 PM
I tend to get 15 sols less on my 1060 3GB rigs compared to 1.5t2.
Running 1.5u2, Windows 8.1 and the latest drivers.
9  Alternate cryptocurrencies / Mining (Altcoins) / Re: gigabyte ga-b250-fintech on: January 04, 2020, 10:55:24 PM
Have 2 of these with the same bios settings and save windows version, but having trouble with one of them.  Works fine with 4 cards but having trouble getting more working.  I don't think this is it, but is everyone adding power to the onboard 12v sockets or is the power to the risers enough?
What BIOS version are you running? Try F3.
10  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: October 16, 2019, 02:06:29 PM
So is there any connection issue with miniZ and Sparkpool again? Can someone confirm? I cannot connect my rigs to sparkpool mining BEAM.
Hi MineOrDie,
we've just tested and it runs fine.
Could you paste here the error? Which miniZ version are you using?
Cheers
It just cannot connect to Sparkpool and retries every 5 seconds. I'm using 1.5q6.
11  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: October 16, 2019, 01:34:29 PM
So is there any connection issue with miniZ and Sparkpool again? Can someone confirm? I cannot connect my rigs to sparkpool mining BEAM.
12  Alternate cryptocurrencies / Mining (Altcoins) / Re: GMiner v1.67 Equihash(BEAM, BTG, YCASH)/CuckooCycle(AE, SWAP, GRIN)/Eaglesong on: October 03, 2019, 12:34:54 AM
I want to report low hashrate on Grin C29 with P106-100 cards. Windows 10, latest drivers.
Other algos work fine.
13  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: August 26, 2019, 07:35:44 AM
something is broken with 150,5,3 on P104-100 GPUs. the hashrate is low, 20-30 Sol/s max, expected 40+.
Feel free to add +500 for memory, use the pill and enjoy 40+
pill does nothing for P104-100 GPUs. it's useful only for 1080 series.
GMiner shows 40-42 H/s with mem at stock clock.
something is clearly wrong with 150,5,3 implementation.
on 150,5 algo GMiner and miniZ hashrates were about equal, on 150,5,3 miniZ is far behind.
Use --oc2.
14  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: August 24, 2019, 05:57:44 PM
Code:
miniZ<125,4>[3:1:00:2480]: Selecting GPU#0[0] GeForce GTX 1060 3GB
Hi MineOrDie,
Thanks a lot for the information.
As you can see it was still loading mode 3, and not 10.
We got the error! This bug will be fixed in the next update.
Cheers
Really waiting for it! You can send me a beta in PM to test it before public release if you want.
15  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: August 24, 2019, 11:05:35 AM
Hello devs
i found a bug with failover pools in config.

You misspelled aionmine.org. That's the reason.
16  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: August 24, 2019, 07:40:48 AM
Code:
miniZ.exe --url wallet.RIG2@stratum.zel.cash:2001 --par=125,4 --extra --latency --shares-detail --gpu-line --telemetry=0 --f11=1 --oc1 --mode=10

Code:
miniZ<125,4>[3:1:00:2480]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[3:1:00:2480]: Selecting GPU#1[1] GeForce GTX 1060 3GB
miniZ<125,4>[3:1:00:2480]: Selecting GPU#2[2] GeForce GTX 1060 3GB
miniZ<125,4>[3:1:00:2480]: Selecting GPU#3[3] GeForce GTX 1060 3GB
miniZ<125,4>[3:1:00:2480]: Selecting GPU#4[4] GeForce GTX 1060 3GB
[FATAL  ] CUDA: failed to alloc 2524 MB for main data
miniZ<125,4>[3:1:00:2480]: Selecting GPU#5[5] GeForce GTX 1060 3GB
Algo:           EQ[125,4]
Pool#0:         user[wallet.RIG2]
                server[stratum.zel.cash] port[2001] ssl[no] pers[ZelProof]
Optimisation:   oc1[0 1 2 3 4 5] f11[0 1 2 3 4 5]
Temp. limit:    [90C]
[INFO   ] Disconnecting from stratum.zel.cash
[FATAL  ] CUDA: failed to alloc 2524 MB for main data
[FATAL  ] CUDA: failed to alloc 2524 MB for main data
[INFO   ]stratum.zel.cash[FATAL  ] CUDA: failed to alloc 2524 MB for main data
[FATAL  ] CUDA: failed to alloc 2524 MB for main data
 Stopping miner
[FATAL  ] CUDA: failed to alloc 2524 MB for main data
17  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: August 24, 2019, 12:39:49 AM
Still the same thing on Windows 10 and 125,4 algo.

Your solver still wants to allocate 2524MB, and my cards only got 2480 memory free.
Nothing changed from the last version.
Hi MineOrDie,
thanks for the feedback.
Could you check what happens if you try to force mode 10 with --mode=10?
Cheers
I tried with that command already. Using it from the start. It's the same as with not mode 10.
You need to shrink your solver just a tiny bit more. Even if that means loss of performance.
18  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: August 24, 2019, 12:22:04 AM
Still the same thing on Windows 10 and 125,4 algo.

Your solver still wants to allocate 2524MB, and my cards only got 2480 memory free.
Nothing changed from the last version.
19  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: August 19, 2019, 11:20:21 PM
Well, the problem with Flypool invalid shares still exists.
20  Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ, a fast & friendly Equihash 144,5 150,5 125,4 192,7 210,9 96,5 Cuda miner. on: August 18, 2019, 10:28:48 PM
Hi,

Can you please confirm that your miner is working correctly with Sparkpool? Because me, and few other people run into issues.
Pages: [1] 2 3 4 »
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!