I am trying the same thing, mining solo on a L3+...
using bfgminer I did some solo mining years ago but cant seam to get it to work now.
would love to know how to solo with this miner, but until then  Prohash FTW.

good link new wallet is updating,.... can i solo mine this with an L3+  ?

needs a windows wallet that can be downloaded.

I have installed the new 2.2.2 wallet (i had no previous wallet)
the wallet seems to be stuck at block  727999 and has been there for days now......I have added the nodes above and restarted the wallet and it looks like nothing has changed.
it states that i have 12 active connections.
What would be the suggested course of action here be?

Hi guys, I have just installed my 1st linux system "mint". I have been a windows tech for 20 years so I am having to teach this to myself as i go. That being said I am wanting to try and run some old gridseed blades (80 chip).
I am totally confused on what ver of cgminer to use, and i am just learning how to install things in linux, (took me a while to install java just so i could do the capita to log in)... I dont think i need to install any drivers like the virtual coms for windows. But I need just a little guidance. feel like I am back in the 80's learning DOS!

are you launching now? what is pool to mine at?  do you have a P2P pool for solo mine?
How about some addnodes??? the wallet is not sync.
and a pool to mine , just one.....??

I have been making sure not to set the ip.... there is a new firmware out on the 12th ,,,, it should address the issue but i have not heard of a confirmed upgrade or the setps to do it right
you think they would put out a manual whit some basic how to's..... if anyone has done this and know the steps please post......I have heard of someone unbricking there V9(look up a few post) by flashing via sd card.....This is the link they gave...https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C    ,,,,,I hope this helps you. and let me know how it goes... I want some fetures back like load bal.  

Ok , chked the router and got the ip,   I type ip into explorer and get nothing. on the miner there is blinking greenlight, on the nic caed only yellow light no blinking green light.
i have downloaded BitmainMinerTool and it can not find the miner ether.,,,,,,,,EDIT    I got it up and running now but I do not see any way to set to load balance or rotate....is this a flaw or is there an update that i need?   2nd EDIT.... there seam to be a high # of "discarded" to "accepted" about 2 to 1 ratio.  any ideas? oh and what is the acceptable temp range for these units?

Just got my new V9 and I need to know how to access it, to set it up. I know not to set static ip til I update.
but with my S3 i just type in the ip address and im in, but how do I find the address for this V9?

I have a gridseed blade single 40 chip, it has stoped lighting up the green light and has stopped turning in work, The #'s in cg miner look like it is hashing.
The red light just blinks once every second. Is there a porblem with the 5v circut? and is there an easy fix for this issue?

This is my list, I mined this years ago and i am trying to update the old wallet it say one conection to network but nvr updates
listen=1
rpcuser=anyuser
rpcpassword=yoursupersecretpassword
addnode=162.221.184.173
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126
addnode=173.195.56.63
addnode=162.221.184.173
addnode=101.173.212.248:6897
addnode=104.172.24.79:6897
addnode=123.56.194.66:6897
addnode=158.69.126.156:6897
addnode=185.93.68.25:6897
addnode=192.241.172.152:6897
addnode=192.52.167.94:6897
addnode=193.192.37.135:6897
addnode=220.245.103.100:6897
addnode=23.227.190.61:6897
addnode=24.200.66.3:6897
addnode=49.248.107.194:6897
addnode=67.193.35.242:6897
addnode=69.36.215.49:6897
addnode=75.110.171.112:6897
addnode=77.121.108.134:6897
addnode=80.213.155.215:6897
addnode=84.250.175.136:6897
addnode=85.25.194.204:6897
addnode=92.170.7.159:6897
addnode=98.115.147.74:6897
addnode=99.253.31.55:6897



hope it helps u more than me

when i open my wallet it says URGENT: Alert key compromised, upgrade required.
but I am running 0.9.3.0-g40d2041-beta    is there any other wallet to download?

I have the new wallet,  not updateing....
rpcpassword=1234
rpcport=8772
server=1
addnode=217.173.184.63:7788
addnode=188.2.18.132:7788
addnode=45.32.155.152:7788
addnode=85.93.13.52
addnode=173.212.230.3
addnode=5.189.180.244
addnode=188.2.23.244
addnode=178.222.178.215
addnode=24.16.78.92
addnode=178.149.107.106
addnode=85.93.13.52
addnode=222.65.18.28
addnode=93.190.224.100
addnode=95.91.246.188
addnode=188.2.23.244
addnode=143.179.69.182
addnode=188.119.33.194
addnode=144.76.174.21

And not a one conecting

Can I get a list of addnodes for this wallet to update to, I mind to wallet address but have never updated not 1 block.

still wondering why my staking wallet keep mining but with 5 out of 6 looking like this....
Status: conflicted
Date: 2/2/2018 08:19
Source: Generated
Debit: 0.00 UNIT
Net amount: -27.2202694 UNIT
Transaction ID: 2f50473e6900f75121a9c55c27906801b7f6fa3dcae8afd70e85ee1532de0a82

No response?

Ok, I officaly turned off my wallet today, Tired of seeing mined coin after mined coin say conflicted.
I might get to keep 1 out of ten at this point so no staking for me...,,, maybe I have a virus stealing it ?

still wondering why my stakeing wallet keep mining but with 5 out of 6 looking like this....
Status: conflicted
Date: 2/2/2018 08:19
Source: Generated
Debit: 0.00 UNIT
Net amount: -27.2202694 UNIT
Transaction ID: 2f50473e6900f75121a9c55c27906801b7f6fa3dcae8afd70e85ee1532de0a82

Generated coins must mature 110 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.




what gives?

what block is it at at what ver. of wallet are you running?
Wallet should be 1.0.2.0

added the nodes and tring to launch wallet (it takes some time to start up) will let you know on the block chain copy.
My other choice is to load a new wallet on a dif. computer and move my old wallet.dat file to it and redownload the chain from the beginning?

ok how would i go about doing the rollback trick?
Or is there a snapshot of the blockchain I can download?