Do you think a Ram change to CL16 or CL14 is needed? 

I am at wits end with this cpu miner.  latest bios for MSI x470 gaming plus max.  i've attempted bios oc via DRAM calculator.  no success. It just crashes when appling adjusted dram timing and I have to reset to basic.  Ryzen Master closes with error anytime I attempt to open and make oc adjustments.  I attempted Clocktuner 2.0.  Immediately I receive messages of "operating system does not see CPPC core tags, CPPC, CBP and Cool and quiet and perferred cores should be enabled.  I've gone into bios and enabled CPPC, can't locate CBP or Cool and quiet mode.  Even subtle OC of CPU and Voltage only lets me achieve 9100Khs on xmrig.   I'm not sure if Windows if not verifiing CPPC or what.  Just know I am at a loss.  Any suggestions would be very appreciated.  New Windows 10 version, latested mobo bios.  This thing should be atleast doing 11000 khs without any OC.  Super puzzled.

Bios Version
7B79vHB1(Beta version)
Release Date
2020-12-20

Well so much for ryzen master.  Every time I open it, I get passed warning accept option and when it opens i freezes and say Ryzen master has stopped working... a problem has occurred and program needs to be closed.  Any other option for OC this CPU.?

Will give this a shot.  I have been trying to set the freq and volts and dram timing in the mobo bios, but apparetly that doesnt help me any.  I will attempt to OC in Ryzen master when I have a chance again.  I have the stock Wrath Prism cooler, but since it only hashes at 9200khs the cpu doesnt get above 51C degrees.  I never gets above 51C degrees for it to have to throttle. 

Need some help if anyone can offer it.  I have pulled countless youtube videos, reddit forums research and still cant get the CPU overclocking down for this.  I have the following hardware:

MSI x470 Gaming plus max MOBO
Ryzen 3900x cpu Wrath Prism cooler
2 8gb Consair Vengance 3600mhz DDR4 CL18 RAM
msi 570 4gb Gpu
running windows
XMRig  6.7.0 mining software
Huge pages enabled.

I have input RAM info into DRAM calculator to get the timing for the Ram.  When I enter those timing and subtiming into the MOBO bios, on reboot it fails and I have to reset to default.  I've also just done simple OC like increase CPU speed from 3.8mhz to 4.1mhz.  changed cpu voltage to 1.25 and Ram voltage to 1.25.   None of this seems to increase the hashrate of the 3900x.  It starts out at 8700khs and only increases to 9136khs.  That is the highest I can get.  

Note:  When I use XMRig benchmark test the cpu get 12517khs.  I dont understand why when I run the miner it only obtains 9100-9200khs.  It never mines above 9200khs and the CPU temp never gets above 52C degrees.  

By chance is the sticks of RAM to high for this cpu... Should i have gone with 3400 0r 3200 mhz ram?


Any information would be greatly appreciated.

I need some help.  I can't get my Ryzen 3900x to mine monero on RandomX any higher than 9200khs.  I have the following set up...

MSI X470 Max
Ryzen 3900x
2 8gb Consair Vengence 3600mhz CL18 Ram
570 4gb card.
windows 10

I've tried stock CPU settings.

I've done the DRAM calculator... Anytime I enter in the timings from the calculator, the Memory just locks up and doesn't boot up into Windows 10.

I've done simple adjustments like OC the CPU from 3800mhz to 4100mhz.

Just looking for proper set up of timing to make this CPU mine atleast over 11000 khs.

Thanks in advance

Using TRM 0.8.1 to mine Raven on Kawpow.  Got a Powercolor 470 4gb with following settings.  Core 1100/850 and memory 2000/850.  the max I can get is 7.5mhs...  regardless of moving core up to 1150, 1175, 1200, and increasing voltage 900mhz, 950, 1000 ect.  Actually when I increase the core voltage to 950 and 1000 it actually starts to drop hashrate.  I have --enable_compute in bat.  Looking for any advise to increase to 10-11mhs.

Note:  when using the --prog_height=937863 simulation mode with the above setting 1100/850 2000/850 the gpu obtains 11.4mhs.

Not sure what im doing wrong but if in simulation mode it achieves 11mhs but can only achieve 7.5mhs when actually mining.

Thanks for any assistance.

bat file

teamredminer.exe -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u wallet -p x --prog_config=A440 --enable_compute
pause

gas fees. 

I have a powercolor 470 4gb with hynix memory.  1100/850 core and 2000/850 memory.   I cant get the card above 7.5mhs on raven.  Why is this card so subpar and cant achieve 11-13mhs

Man the 470 4gb card I have only pushes 7.5mhs on raven with 1100/850 core and 2000/850 memory.  Any OC beyond that maybe gets me 7.6.  Is there any bios flashing needed to achieve higher on kawpow?

 If your using the latest Nvidia drivers, you may need to update windows if your running an older version.  More information is needed to assess your problem.  Did drivers fully download when installed?

Has anyone been successful regulating fan speeds using the command -fanmin???  I don't know if the drivers are overruning the command line but I cant get my 5700xt to maintain fan speeds.  Using 5.5c.

Roughly 60-75 watts.  Thats power draw on boot up of MOBO, CPU, GPU and PSU. 

What is the cards performance?  What MHS are/is it producing?

ZEC is purely an ASIC driven Algo.  Your GPU wont do you any good.

Is anyone else having trouble controlling fan speed in batch file?  I have -fcm 2 and have -fanmin 50, 60, 70, ect...  but some of the cards just randomly run the fan based off temp.  I have various rx5700.  The ones that seem to not want to play along with batch file command are MSI Gaming, Sapphire Pulse and Powercolor red dragon.  This all started when I started running 5.5b and installed newer drivers like 20.5.1 and 20.11.2.  When running 5.3 and 5.4 with 19.x.x drivers the fan controls were excellent.

Its necessary to reduce the amount of electricty consumption and to reduce heat.  If your mining ETH... it is a memory based Algo so the core is not needed as much to mine.  Hence why you can reduce core clock to save on power draw. 

Not the same cards but both my RX5700 rigs dropped a total of 2.x mhs for no reason about 1-2 weeks ago.  So about the same drop of 0.5mhs per card.  I was running phx 4.9.   switched to 5.3 and it didn't change.  Only explanation is indeed DAG size. 

Anyone else experience a 2 mhs drop in their rigs?  I have 2 RX5700 rigs,  no change in OC or UV and both dropped approximately 2 mhs.  Is this just due to Epoch growing?