 Show Posts
|
|
Pages: [1] 2 3 4 5 »
|
There is no 8 GPU limit for nVidia. It is for AMD only.
There is. Windows (at least 1703 or older) sees 9 or over nvidia cards, but miners don't work. |
|
|
|
|
just for fun
stock msi rx550 2gb 1205/1750 - 10,1 mh/s (exp), claymore 9.8
|
|
|
|
|
picopsu
aliexpress.com/wholesale?ltype=wholesale&d=y&origin=y&isViewCP=y&catId=0&initiative_id=SB_20170608180144&SearchText=picopsu&blanktest=0&tc=af
it's just a dc-dc converter (12v from server psu to 12v, 5 and 3v atx + 4/8pin cpu + some molex & sata)
|
|
|
|
|
i've managed to install 9 cards into one mb (asus strix z270f, windows 10 1703) but unfortunately none of ccminer forks support such a config
it just freezes the system when i run ccminer (tried tpruvot's 2.0, alexis's etc)
if i remove any card to get 8, ccminer works as usual
|
|
|
|
16.9.2 newer drivers do nothing (not for nvidia case  |
|
|
|
|
remove all cards except one, delete amd drivers using DDU
install drivers, reboot, add your second card, boot, reboot
add third card etc...
disabling onboard gpu doesn't matter
|
|
|
|
don't use sata connectors with rx series even if you got brand psu, sata connector in a cheap chinese riser is not a brand |
|
|
|
|
nicehash miner is the simplest solution, it can hide mining windows and run when idle
|
|
|
|
|
confirmation takes 288 rounds, which is about 14,4 hours
so it's a pure luck if coin get some pump or dump in that 14 hours
just now it's a bit more profitable than eth
|
|
|
|
|
@luciano, if you're talking about bts, play with intensity and gpu eth-like settings
@sd_, 378.49 & ccminer-alexis
|
|
|
|
|
i got 300-310 mh/s lbc with 155wt (nvidiainspector or nv-smi data), so 920 watt total of 6x1070 rig
further downvoltage is possible, <900 watt is not a dream
|
|
|
|
|
rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw
|
|
|
|
single gtx1070 palit gamerock (micron) with super jetstream bios - 480-490 sol/s ewbf 0.3.1b downvolting&overclocking via afterburner curve  |
|
|
|
|
one of the rig clients (token **7d1f3) starts normally, receives configs, starts miner but then it doesn't send any info to server
what could be a problem?
|
|
|
|
|
web ui doesn't show SIA hashrate (when dual mining with claymore), coin icon, profitability
|
|
|
|
|
max fan speed can't be set to 5200 (for example stock rx480)!
|
|
|
|
|
epools.txt failover list is not supported for claymore, that's a problem
|
|
|
|
kabylakes got 4 additional pcie lines compared to previous cpus so maybe it will support at least 6 gpus (who cares about roi? ) |
|
|
|
|
