662
|
Economy / Computer hardware / Re: [OPEN] ASICPuppy.net - In Stock Miners - Rocket Box 450gh/s - BTCGarden 310gh/s
|
on: July 07, 2014, 06:20:04 PM
|
2 rocketbox and 3 BTCGarden units left. Any orders in the next 20 minutes will be shipped today.
Also, R-Box is back in stock
With the BTCGarden if you don't get it with the RPI does it still come with the SD card and everything else you need to set it up? I have the official stack of Pi here and really don't need more.... -Dave Yes, I will ship with SD card and data cable if you need it.
|
|
|
666
|
Bitcoin / Hardware / Re: RK-BOX,450GH/S,480W ,shipping date 25th
|
on: July 05, 2014, 07:25:29 PM
|
Disregard the previous version numbers I listed. Right Image: RaspberryPi_Rockminer_Rocket_V1.1.imgWrong Image: RaspberryPi_Rockminer_RBoxV0.3.1.img I would try running against an x86 build of cgminer and see if they behave the same way. It seems yours are being recognized as rboxes… I had the same thing happen when I tested them on a 4.4.1 build of cgminer. Also, make sure they are getting enough power. I have 6 running, 2 on rpi, 2 on beaglebone, and 2 on x86 ubuntu. No problems other than 10% reject rate.
|
|
|
667
|
Bitcoin / Hardware / Re: RK-BOX,450GH/S,480W ,shipping date 25th
|
on: July 05, 2014, 07:09:05 PM
|
Rockminer.com points to an sd image for the rocketbox on megaupload that is actually an image for the rbox(1.3.1). You'll notice the web-UI is version .5. I had similar issues with this build. You'll need to download the 1.3.2 version from baidu(web-UI v.9). I have 2 RBoxes running at 450-500gh/s off of 1 RPi on the latest version, although with 10 percent rejects.
I also built the latest customized cgminer for beaglebone and an x86 box. They seem to be a bit more stable on those systems. I'll provide an updated windows installer sometime this weekend.
|
|
|
672
|
Economy / Computer hardware / Re: [OPEN] ASICPuppy.net - In Stock Miners - BTCGarden 310gh/s - ATX Breakout Boards
|
on: July 03, 2014, 04:39:27 AM
|
Decibel readings with free iPhone app
I used "Decibel 10th", a free iPhone decibel meter application. I would take these readings with a grain of salt as I can not attest to their accuracy, especially since it's an iphone app using my old iphone 5 microphone.
BTCGarden @2 feet - 59 decibels BTCGarden @5 feet - 54 decibels
S1 @2 feet - 59 decibels S1 @5 feet - 55 decibels
So, basically the same. I will say that the S1 fan is higher pitched and more noticible, to me at least.
I've got 8 left. Any orders placed before 8 AM CST Thursday will be shipped same day. Since Friday is a holiday, any orders past that point will be shipped Saturday.
|
|
|
674
|
Economy / Computer hardware / Re: [OPEN] ASICPuppy.net - In Stock Miners - BTCGarden 310gh/s - ATX Breakout Boards
|
on: July 02, 2014, 07:41:56 PM
|
how loud is this? compared to the s-1 antminer set for 180gh
It's got 2 12v fans but they do not appear to be running at full speed. I'd say it's comparible to the s1, if not a little quieter. I don't have a DB meter to confirm. They are also easily stackable. Install a DB meter app on your phone and check with that mate! I'm not sure how accurate the iphone apps out there are, but I'll give it a shot tonight. Unfortunately, my last S1 is a clicker, so comparison results may be off.
|
|
|
680
|
Economy / Computer hardware / Re: [OPEN] ASICPuppy.net - In Stock Miners - BTCGarden 310gh/s - ATX Breakout Boards
|
on: July 01, 2014, 05:18:16 AM
|
Another cool use for the breakout boards: I'm using the 5v to power the AM-V1 RPi controller and control the PSU. Just strip the usb power cord(included) and slot the red(5v+) and black(ground) plug into the 5v connectors on the breakout board. Now you can power your BTCGarden AM-V1 and RBox units off of the same PSU.
I also want to note that you do not need to purchase an RPI controller from me. If you have your own, I'll can send just the SD card and RPi data cable.
|
|
|
|