I have some PRIV lying around. Is there a swap going to happen soon which I need to keep a look out for?
Yes the swap is going to happen! Somebody bought a bunch of these. Is there a news or another website where there is active discussion? |
|
|
|
|
I have some PRIV lying around. Is there a swap going to happen soon which I need to keep a look out for?
|
|
|
|
|
Now that the market is bullish, can we discuss trading bots and strategies. which one did you find any success with and strategy?
|
|
|
|
I have about 95 mh/s on Windows with my Radeon VII, have not played much with timings as I think this quite good. But is it worth moving to Linux? If so, which one? Not sure I'm ready to pay for anyting.
which country do you buy your radeon vii? I bought mine on Ebay, early this autum (10x). 11x was 3060 TI. It's impossible to almost buy any new gpu these days. yeah thats why I am having to make do with rx 580 and 480 |
|
|
|
I have about 95 mh/s on Windows with my Radeon VII, have not played much with timings as I think this quite good. But is it worth moving to Linux? If so, which one? Not sure I'm ready to pay for anyting.
which country do you buy your radeon vii? |
|
|
|
|
User: smartcrypto
Position to Apply: Member
Posts Start: 311
Address: 3Q8wFqnsibDzf9k5M39cpZRz8AXiov2EhR
oh nevermind you need 5 merits every 4 months to be accepted.
|
|
|
|
My stats: rx 580 30mh/s at 74w. rx 480 27,5mh/s at 62w.
Could it be possible to increase the 480 to 30mh?
58°C Fan: 2.5 Hash: 29.82 01 Ellesmere RX 480 113-1E353GU.O52 Micron 67°C Fan: 2.8 Hash: 29.82 02 Ellesmere RX 480 113-1E353GU.O52 Micron 71°C Fan: 0.3 Hash: 29.72 03 Ellesmere RX 480 115-D000PIL-100 Samsung 63°C Fan: 2.7 Hash: 30.27 05 Ellesmere RX 580 113-1E3870U-O4B Samsung 55°C Fan: 2.7 Hash: 29.82 06 Ellesmere RX 480 113-1E353GU.O52 Micron 72°C Fan: 2.3 Hash: 29.26 07 Ellesmere RX 480 115-D000PIL-100 Samsung how to make so low power used ? in stats i am using 110 watt each gpu I have xfx rx 480. clock 1100 voltage 880. memory timing level 2, memory 2020 and memory voltage 870 in amd radeon settings. no errors, no invalid and no crash for 2 days. It's possible the stats software you use is more accurate. HWInfo and amd radeon settings report only main chip power and not from other rails so its not that accurate by the way. |
|
|
|
"Claymore API now supported, meaning you can use EthMan to monitor TRM rigs"
not working. I use EthMan with phoenixminer works fine on local network. not with TRM.
I set --api_listen port so claymore's android monitor works but when I click "console" it fails to load the console "webpage not available"
Anybody has any idea how to see the console from network? |
|
|
|
Anybody else can tell me why 0.8 wont ramp up the speeds with my 5700XT? It stays at about 11MH/s compared to 52MH/s with 0.7.22. Config is B.
You will need recent drivers to use B mode, as devs told us. Try A mode to see if it works. If works, problem is driver too old for B mode. how do you switch to B mode? Adrenalin Version is 20.12.1, and it says its the most recent driver? On A Mode, it reacher closely the same MH/s as before, without problems. You can switch the mode between A/B/C in the .bat. Just insert --eth_config=A // B / C and it will autotune to the different modes. B mode on polaris didnt work. dag buffer failed for 1 gpu and the other one mining at 2mh. Anyway is there a monitoring software which works with trm? for pc. |
|
|
|
Anybody else can tell me why 0.8 wont ramp up the speeds with my 5700XT? It stays at about 11MH/s compared to 52MH/s with 0.7.22. Config is B.
You will need recent drivers to use B mode, as devs told us. Try A mode to see if it works. If works, problem is driver too old for B mode. how do you switch to B mode? Adrenalin Version is 20.12.1, and it says its the most recent driver? On A Mode, it reacher closely the same MH/s as before, without problems. You can switch the mode between A/B/C in the .bat. Just insert --eth_config=A // B / C and it will autotune to the different modes. and how to specify different mode for diff gpu? |
|
|
|
Anybody else can tell me why 0.8 wont ramp up the speeds with my 5700XT? It stays at about 11MH/s compared to 52MH/s with 0.7.22. Config is B.
You will need recent drivers to use B mode, as devs told us. Try A mode to see if it works. If works, problem is driver too old for B mode. how do you switch to B mode? |
|
|
|
|
My stats: rx 580 30mh/s at 74w. rx 480 27,5mh/s at 62w.
Could it be possible to increase the 480 to 30mh?
|
|
|
|
0.8.0 on Radeon VII -- ! [2021-01-19 12:01:56] ------------------------------------------------------------------------------------------------
[2021-01-19 12:01:56] Mining ethash with 1 GPU workers
[2021-01-19 12:01:56] GPU PCIe CUs CoreMHz SocMHz MemMHz TEdge TJct TMem FanPct FanRpm VDDC ETH Cfg
[2021-01-19 12:01:56] 0 04:00.0 60 1940 971 1200 53C 85C 69C 82.75% 3216 1025 mV C320
[2021-01-19 12:01:56]
[2021-01-19 12:01:56] Stats Uptime: 0 days, 00:27:30
[2021-01-19 12:01:56] ----------------------------------------- GPU Status -------------------------------------------
[2021-01-19 12:01:56] GPU 0 [53C, fan 82%] ethash: 120.0Mh/s, avg 119.4Mh/s, pool 121.0Mh/s a:131 r:0 hw:0
[2021-01-19 12:01:56] Total ethash: 120.0Mh/s, avg 119.4Mh/s, pool 121.0Mh/s a:131 r:0 hw:0
[2021-01-19 12:01:56] ----------------------------------------- Pool Status ------------------------------------------
[2021-01-19 12:01:56] daggerhashimoto.usa.nicehash.com ethash: 119.0Mh/s, avg 118.2Mh/s, pool 121.0Mh/s a:131 r:0
[2021-01-19 12:01:56] ------------------------------------------------------------------------------------------------ That's at 285W, so 421MH/s/kW. That's so good! such a shame these cards are impossible to find |
|
|
|
|
"Claymore API now supported, meaning you can use EthMan to monitor TRM rigs"
not working. I use EthMan with phoenixminer works fine on local network. not with TRM.
I set --api_listen port so claymore's android monitor works but when I click "console" it fails to load the console "webpage not available"
|
|
|
|
anyone with a invite? I have been in crypto for years. Not with much luck though  Really interested in this one Less than 3hours left for next validation. If your wallet synchronised, try on Telegram group https://t.me/Idenacodes and ask for invite code. you have to know that it is necessary to start your wallet much before validation start, after the restart, they also need to sync. don't wait for the last minute. I got an invite but it only worked on web wallet not on windows wallet. I fast synced my wallet. |
|
|
|
anyone with a invite? I have been in crypto for years. Not with much luck though Really interested in this one |
|
|
|
P.S: I wrote this to Telegram chat, then also pasted to here. Feel free to join us at the TG chat if not already done: https://t.me/DECNT_Unofficialthis link wont open for me. I tried it many different times, and different browsers. |
|
|
|
If anyone has any thoughts on how to prevent gaming, I'd be happy to hear them.
Gaming eradication is not an easy task but it can be reduced.
There are some guru on this platform that can fetch out double entry or gaming accounts provided the information are made public.
My suggestion is that every participants should apply on this thread and post their wave address before they receive the airdrop, the scam busters shall be able to catch up with gamer ( I reserve other comments)
I had also pm you yesterday and i am waiting for my DECNT airdrop.
The challenge there is that I'm getting responses here, on Twitter and on Telegram. Fortunately, when I check the accounts on the waves block explorer, 95% of them are established accounts with a history, which is somewhat reassuring (I'm that most alts would typically be virgin accounts). That's true, but then I came back to these forums after more than an year and I didn't even discover waves until I saw your thread. So my waves account (on waves exchange) is new. I am sure there's many like me here. |
|
|
|
|
There will have to be vetting process to ensure no one is having alt accounts here. With 100 account limits, it will be easier to vet these accounts. I am up for the task if needs be.
|
|
|
|
|
Show Posts
