 Show Posts
|
|
Pages: [1] 2 3 4 »
|
|
1
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE][AMD][NVIDIA][CPU][XMR]How to Mine Monero + Miners Download Links ⛏
|
on: August 29, 2017, 01:54:05 PM
|
Hi guys! I read all the guide, I was mining with clay 9.7 for XMR, getting around 780 H/s per card (have 3 cards RX570), Im on win10 x64 with custom timings (hynnix).
As you said, sgminer would have higher hashrates, but I could only get 720 H/s per card maximum...
I tried tunning worksize, with no succed...
Also tried Intensity but only get worst results...
If I change the gpu threads param, the program dont work properly...
any ideas?
ty in advance
SGminer with stock conf isn't very good, but with right settings it can do much better. Also XMR-STAK, can almost achieve SGminer. Not sure about Claymore improvement, I just tried it stock, it has much higher power consumption. I will do guide with conf files for these miners, but probably won't share for free. Since I've showed you my stats on my 5 card mixed rig I will continue with it. It's not the highest you can have with RX cards. Total hashrate with 2x RX 470 and 3x RX 480. First is XMR-STAK-AMD 1.4.0, second is Claymore XMR 9.7 and third is SGminer 5.5.5  interesting, there are more parameters than Worksize and Intensity (Besides GPU_Threads) to tweak? if so, can you pls tell me which ones? I will continue testing others settings. By the way, the GPU Clock on monero does affect a lot the perfomance. |
|
|
|
|
3
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE][AMD][NVIDIA][CPU][XMR]How to Mine Monero + Miners Download Links ⛏
|
on: August 28, 2017, 11:29:10 PM
|
|
Hi guys! I read all the guide, I was mining with clay 9.7 for XMR, getting around 780 H/s per card (have 3 cards RX570), Im on win10 x64 with custom timings (hynnix).
As you said, sgminer would have higher hashrates, but I could only get 720 H/s per card maximum...
I tried tunning worksize, with no succed...
Also tried Intensity but only get worst results...
If I change the gpu threads param, the program dont work properly...
any ideas?
ty in advance
|
|
|
|
|
5
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Hashrate RX 570
|
on: June 12, 2017, 02:01:20 AM
|
Exactly, the powersave bios from Anorak. CjMapope... THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to 24.3, the second card is running at 26 mh  110watts/card. I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD THANKS again!!  Edit: I just tried +14... cards now runs at 114watts but getting 25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It  That's what you get from those bioses download on the internet... My cards had 25MH/s stock  Now 29-31MH/s RX 470/480. Can u share those BIOSes of u? |
|
|
|
|
6
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Hashrate RX 570
|
on: June 12, 2017, 01:21:43 AM
|
Zero on most, 1 every 10 minutes or so on a couple
Is that the dorrymills moded strap? Can you please check if you get any errors at 2050 MHz? Yea, and I just said I dont get any errors at 2100 for most of the cards. @Apnel
I have the same cards, but I'm a bit scared to run the memory at 2100Mhz.
U think this is safe? Whats ur memory mV?
Can't change mem mV, higher voltages is what will really decrease life of an electronic not higher clocks so the only thing you gotta worry about is stability Can you elaborate a bit on "modified 1425 strap" or point me in the right direction? I am working with a batch of 570 Sapphire ITX (Elpida). ETH: GPU0 27.811 Mh/s, GPU1 30.827 Mh/s, GPU2 29.126 Mh/s, GPU3 30.816 Mh/s, GPU4 30.805 Mh/s I am running on copy+paste 1500 straps. GPU0 is the highest ASIC (78.5%) but won't run stable past 1925mhz. GPU2 is my lowest ASIC (68.5%) and is stable @ 2000mhz. The rest are 70%+ and fine @2100. It bugs me when I can't get 30 out of a card. I'm willing to learn but having a time finding info. Like someone else said, ASIC quality doesnt have jack to do with memory. There's batches of memory that simply can't run over 27MH regardless of strap or mods Can one of u guys, point me where to find that "dorrymills moded strap" for hynnix, cause I searched and cant find it. ty guys! |
|
|
|
|
9
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: EWBF's CUDA Zcash miner
|
on: June 04, 2017, 11:02:51 PM
|
|
I`ve a problem, I`m mining on mph using multi algo switch, but whenever the pool changes from ZEC to another algo EWBF's just doesnt exit the program...
this is my BAT:
---------------------------------------------------------------------------------------------------------------------
@echo off
SETLOCAL EnableExtensions
SET USER=luiggybit.Nvidia
SET PASS=x
SET A=ethminer.exe
SET B=zminer.exe
SET C=ccminercryptonight.exe
SET D=ccminerAlexis78.exe
SET E=ccminerTanguy.exe
SET POOL=hub.miningpoolhub.com
:start
ECHO - EquiHash - ETHash - groestl - myr-gr - skein - neoscrypt - cryptonight
%A% --farm-retries 1 -G -S us-east.ethash-%POOL%:12020 -O %USER%:%PASS% -FS exit
%B% --eexit 3 --server us-east.equihash-%POOL% --port 12023 --fee 0 --user %USER% --pass %PASS%
%C% -r 0 --bsleep=0 --bfactor=0 --launch=32x18 --url=stratum+tcp://asia.cryptonight-%POOL%:12024 --userpass=%USER%:%PASS%
%D% -r 0 -a neoscrypt -o stratum+tcp://%POOL%:12012 -u %USER% -p %PASS% -i 15
%E% -r 0 -a groestl -o stratum+tcp://%POOL%:12004 -u %USER% -p %PASS%
%D% -r 0 -a lyra2v2 -o stratum+tcp://%POOL%:12018 -u %USER% -p %PASS%
%D% -r 0 -a myr-gr -o stratum+tcp://%POOL%:12005 -u %USER% -p %PASS%
%D% -r 0 -a skein -o stratum+tcp://%POOL%:12016 -u %USER% -p %PASS%
REM %D% -r 0 -a blake2s -o stratum+tcp://%POOL%:12019 -u %USER% -p %PASS%
GOTO start
----------------------------------------------------
It works fine with the other mining software, just EWBF seems does not exit properly... any help?
|
|
|
|
|
10
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: GTX1070 - Hashrate - Power drain - best performance
|
on: May 31, 2017, 12:55:47 AM
|
On Nicehash my 1070s are doing best on Eth right now + I am dual mining with them so even better.
Until recently, though, Equihash algo was superior by a good margin.
On my 1080 rig it prefers Lyra / Lbry.
I am also going to build a 1060 rig and see how that does.
Can u please be a kind person and tell me or show me a link of how to mine on nicehash with 1070?, I've a 1070 and a 1060. |
|
|
|
|
12
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Best altcoin to mining?
|
on: May 31, 2017, 12:51:44 AM
|
What's your idea to the best profitable altcoin mining today? And why?
People en here is so nice.... Try to mine ETH if u have an AMD card or ZCahs if u have a NVIDIA card... In my case, I'm minnig at zpool, it switches over time to the most profitable coin... |
|
|
|
|
13
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: What to Mine?
|
on: May 29, 2017, 01:48:00 AM
|
Hi all!, I was doing a very big research in the past 2 weeks, but cant decide what is better to mine right know using GPUs...
Currently I have 2x1070GTX (planning to get more)... and I'm mining at zpool, using nemos (.bat) batch, for mine the most "profitable" coins... (btw is this working ok?)
Is this the right way? or I'm missing something, I have to say, I'm not new on this, I started mining bitcoin and litecoin 5 years ago (always using GPU) but then I take a break of this world haha...
Well... I'm aware of new cryptos like, ETH, MONA, and new algos like SKEIN, C11, BLAKE, BITCORE etc... also, I know that some algos are better with Nvidia and some others better with AMD.
I hope u can help me guys!!!
eth is new token? bitcore is an algo? you did a very big research? please tell this to horse, he have bigger head... ty, u are very usefull... |
|
|
|
|
14
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: What to Mine?
|
on: May 28, 2017, 12:35:35 AM
|
The best answer is to go to www.whattomine.com and explore their bajillion profit calculators. Their front page even has a setup with GTX 1070s, so just choose 2 1070s and it will calculate an approximation of what the most profitable coin today is. If you know your exact hashrate then you can manually adjust that to be even more accurate. Yes, I always take a look to that web, but in many cases the "Profitable" coins are fluctuating over the day several times... so I cant decide Which coin to mine. That is the reason why I mine over zpool |
|
|
|
|
15
|
Alternate cryptocurrencies / Mining (Altcoins) / What to Mine?
|
on: May 27, 2017, 09:41:01 PM
|
|
Hi all!, I was doing a very big research in the past 2 weeks, but cant decide what is better to mine right know using GPUs...
Currently I have 2x1070GTX (planning to get more)... and I'm mining at zpool, using nemos (.bat) batch, for mine the most "profitable" coins... (btw is this working ok?)
Is this the right way? or I'm missing something, I have to say, I'm not new on this, I started mining bitcoin and litecoin 5 years ago (always using GPU) but then I take a break of this world haha...
Well... I'm aware of new cryptos like, ETH, MONA, and new algos like SKEIN, C11, BLAKE, BITCORE etc... also, I know that some algos are better with Nvidia and some others better with AMD.
I hope u can help me guys!!!
|
|
|
|
|
17
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] [Rt2] ·rotoCoin· Vote for us on Coinedup![DGW][N-Factor] · 288k Only
|
on: April 03, 2014, 03:11:41 AM
|
Guys to be listed on mintpal, the dev needs to put some btc... we only got 500 votes and the first got 60000... its imposible tu get listed only voting.
btw already voted 20 times (4 hours)
We are focused on keep bulding our project, that's our goal right now. Exchangers are not a priority at the moment, but if the community wants bigger exchangers we let the community vote. As we said from the beginning we are not going to pay to get listed. You guys can vote every hour. Cheers whats the e.t.a on any upcoming improvements? its been a while .. were is the IRC chat? any other wallet updates in the pipeline? people need info not just 'we are working hard to improve the coin' all the time. - without actually seeing any updates yet. Information even if its bad is better than nothing.., 2nd time i asked this.. can we have some concrete updates please. I'll try to compile windows wallet... but I dont see big improvments, I support this coin, in fact I mining this coin since was released, but I want to see the comunity grow, and new feauters in our wallets, etc etc. Cheers Sorry but we answered all those questions. The chat it's in the source like 4 days ago, we posted it several times here on this thread. Mac beta wallet with chat was also released. Windows wallet has not been compiled yet. The source it's there, if anyone it's able to compile it, we'll be glad to give a 2 rotocoin bounty. Otherwise we'll try to release it in a few days ( I'm not at home). Irc tipbot it's up and running, bets will start in a couple weeks. New website was released last week . Cheers |
|
|
|
|
19
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] [Rt2] ·rotoCoin· Vote for us on Coinedup![DGW][N-Factor] · 288k Only
|
on: April 02, 2014, 01:09:21 AM
|
when we gonna have the wallet with chat???
which are the future projects for this coin?
The wallet with chat for linux was in the latestest github release a couple days ago. OsX wallet with chat it's beta, we need to fix chat theme and chat connection. Even with that chat works perfect. https://mega.co.nz/#!fQZRnYTS!THB3_I8_4Bgq3WbFR2IZhMg9Il9_-1QmRX6JY0SV2I8 Windows wallet just need to be compiled. Tipbot it's ready, you can find it on our irchannel bets will start in a couple weeks. More stuff will come. We just released our new website like 4 days ago. Cheers That's what I want to hear!!!!, how can we compile windows wallet? XD, for what is the tipbot? ty, I speak spanish so, if u wanna speak in spanish will be better |
|
|
|
|
