|
2
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Onda B250-D12P-D1 cannot boot more then two Tesla P100 -16GB Cards - 100$ Reward
|
on: March 31, 2024, 03:11:54 AM
|
Just to keep you all in the loop, the Celeron theory was tested  i bought i3-4 Core CPU, same result. i suspect the B250 Chipset and how the PCI Lanes are address is part of the Problem. Expensive Lesson for us, as we have to buy now Server ontop of the cases we got initially. (we event tried two other different Mining mainboards, but they had also the B250 Chipsets and did not work out.) We even were going as far as getting an Octominer Case, but that did not work either. Only working solition so far was a professional Server System. Is it works with riser? Is it windows?or? Driver? |
|
|
|
|
6
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: pyrin mining
|
on: February 04, 2024, 07:31:43 PM
|
I'm not sure if I should hop on it yet or no. Like you said, probably won't make it to an exchange. I did a little research on that project and I couldn't find them on miningpoolstats. Is it only CPU minable? I couldn't find the answer on their website.
Thanks
I didn't find this project on miningpoolstats either. The project is new and may very well not survive to the listing. On github you can find instructions for Nvidia, AMD video cards and processors. Intel video cards are not supported, or there is no information. https://github.com/Pyrinpyi/pyrin-minerIf you are interested in the project, I would advise you to ask questions in the discord. You will find the link on the official website. Bad news for you-it made to exchange. It trading on mexc  Now there are links to 3 available exchanges in 1 post. The coin has only recently been traded on the MEXC exchange, but the liquidity there is good. There is a lot more necessary information about the coin in this useful resource hashrate.no https://hashrate.no/coins/PYIThis is good. More pow coins makes me happy |
|
|
|
|
8
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: pyrin mining
|
on: February 01, 2024, 02:12:38 PM
|
I'm not sure if I should hop on it yet or no. Like you said, probably won't make it to an exchange. I did a little research on that project and I couldn't find them on miningpoolstats. Is it only CPU minable? I couldn't find the answer on their website.
Thanks
I didn't find this project on miningpoolstats either. The project is new and may very well not survive to the listing. On github you can find instructions for Nvidia, AMD video cards and processors. Intel video cards are not supported, or there is no information. https://github.com/Pyrinpyi/pyrin-minerIf you are interested in the project, I would advise you to ask questions in the discord. You will find the link on the official website. Bad news for you-it made to exchange. It trading on mexc |
|
|
|
|
10
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Weird high temp RX470 Armor
|
on: January 08, 2024, 03:25:21 AM
|
yeah xfx were always troublesome.
Question on the rx 470 cards I have six maybe seven blower cards.
what do they give if mining Kawpow.. I have a six card board I can set up do they do 16 or 18 or better for kawpow? i think watts are around 120.
what should core be?
i use simple mining.
core 1150?
volts. .700
mem. 900
volts 1.300
vots. .750
have not run them in a while.
Your numbers way good than mine 16-18. I get 13-14 using teamred but i lower power. 1125 core 2000 memory and voltage same for both 890mv. And there is trick i still overclock them using phoenix miner. I give all oc settings in bat file and write -leaveoc.phoenix miner has -vmr parametr which gives extra hashes. Claymore gave name for this rxboost. It memory refresh rates.i use -vmr 30 There is bench mode on phoenix miner.when you write -bench 50 it bench your rig for epoch 50 and applies all oc setting to cards  |
|
|
|
|
11
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Weird high temp RX470 Armor
|
on: January 03, 2024, 03:35:53 PM
|
yes might be liquid inside copper pipe leaked, but i dont think cause to much for rx 470 card which is low power gpu, might be some bent in mounting and die not connecting evenly in heatsink
this happen on many vegas gpu. trying to replace with new heatsink to costly for gpu already fall in price
In my case it was a RX580, but same series basically. I did notice on this particular model (MSI Armor) that when you take the heat sink off the GPU, on the backside there is a small copper tube inset in the block with the two aluminum tubes connected one each end. I wonder if this is why this particular brand/model leaks more. I have other similar GPUs from that era that have a similar design that use solid aluminum throughout with the piping (tubes) all being one piece instead of two. Anyway, I assume that what ever fluid they use inside these tubes, or heat pipes, boiled away over time and now they are just empty tubes of air acting more like an insulator than a conductor of heat. All that is left is the direct metal contact of the remaining portion of the heat sink which will transfer some but not all of the heat away. MSI Armor is a reliable video card in terms of elements, but it has very poor fans and cooling radiator. If there is overheating, it is usually due to gas escaping from the radiator tubes. On the secondary market, these radiators are bad and they cost 80% or more of the cost of the used video card. My video cards mine the Kawpow algorithm with a temperature of 90 degrees with a bad heatsink and they are still alive. Hi FP91 Nice to see people still here and talking. Hows your rigs running? I have armor rx 470 running since 2018 with original fans fans quality amazing they just dont die.i have 3 armor rx 470 and one armor 480 8gb. I think they had problem in factory with heat pipes for this model thats why i saw same problems with armor rx470. Worst fans is xfx rx570.red fans |
|
|
|
|
12
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Weird high temp RX470 Armor
|
on: December 31, 2023, 06:44:39 PM
|
try to swap the entire cooler with the good msi armor see if the problem follows the cooler.
Thanks for this! I know it's an old thread (found searching on google) but I had a couple older cards laying around that for some reason ran extremely hot no matter what I did. I tried the usual things like reapplying thermal compound, cleaning dust out, running super low voltages, etc. After finding this I swapped the entire heat-sink cooler with another that ran fine and it worked. Until coming across this post I would have never thought the cooler would be the problem, as its mainly a hunk of metal with two fans attached, which in my case the fans were good. So is it the liquid inside the little tubes that leaks out or what? I might try my luck on eBay and buy some parts-only GPUs for the cooler portion, but how to know if they are good? In 2018 i had rx470 armor like authors of this post. You are right heat pipe was not working. You can easily diagnouse it by touching the the tubes or if you have couple of multimeters it has temperature sensor. Attach the sensor on tube and look.in my case heat pipe was not reacting at all. I replaced radiator from dead xfx 480. I need to cut some parts but it is still working this days. |
|
|
|
|
Show Posts
