 Show Posts
|
|
Pages: [1] 2 3 »
|
Hello all, can ANYONE help me please with my problem? Since version 2.2.c I am not able to run any newer version. All the time I only changed new release to my directory and run. But after release 2.2c I cannot run miniZ (trying all version since 2.2d, 2.3, 2.4 and also 2.5) on the same machines. So I can run only 2.2c and any older.  Its not about Windows version (using W10 and W11). Its not about cards (mining with RTX 3070 and RTX 3080) Also its not about antivirus (other miners in the same directory are OK and I have an exception). After start any miniz.exe WITHOUT parameters it should show a window with version - thats the right manner. When i try to start newer version than 2.2c - so it only blinks for a 1 second and closes itselfNo error, no warning, only closes itself. I dont understand, why any older version is functional and newer versions not. Something new (maybe in memory management or access to memory???) is in 2.2d and newer versions. Is there anyone, who can tell me, where is the problem? Thank you very very much... |
|
|
|
|
Hello there,
I am not able to run 2.4d
In the same rigs, drivers, cards, settings (OC and without OC), AV exceptions (or OFF).
New version only "blinks" for about 0,5sec and closes. No erros, no warnings.
Version 2.2 runs good and stable.
Also tried just run standalone miner with just doubleclick - the same result.
|
|
|
|
On hiveos, my GTX 1070 make only 27mhs. Before it was always above 30mhs.
How can i get 30mhs?
This is a TLB known error... In these cards is increasing DAG really a killer... So speed around 27MHs in this time is OK. Some poeple reportered speed around 27.5 etc with +100 or +150 OC on Core. Increasing OC on memory above 600-700 does nothing now... You can change your card to 1070Ti - these cards are still OK and their speeds are about 31MHs |
|
|
|
On hiveos, my GTX 1070 make only 27mhs. Before it was always above 30mhs.
How can i get 30mhs?
Its because of TLB malfuntion on the chip... In this time the speed around 27MHs is really OK. Some people have their cards slightly fastered with core +100 (+150), because increasing memory above 600-700 does nothing... |
|
|
|
Latest version, on hiveos and windows, my GTX 1070 make only 27mhs. Before it was always above 30mhs.
How can i get with Phoenix 30mhs?
Its longer time before GTX 1070 do about 27MHs, cause the TLB malfunction... The DAG is a killer to these cards (1070Ti are not affected). You can increase core clock +100 or +150 to keep speed around 27MHs, but it will be lower and lower with the DAG size. Increasing memory clocks above 600 or 700 does nothing now... |
|
|
|
Hello boyz, I know, that NicehashMiner officially disabled a chance to download TRex miner inside aka the others excavators. i have NH with new corefiles (still in current version 3.0.6.5) when new version of Trex released, i copy them to the Trex folder Everything worked fine till the last version since 23.xEvery start of any version (23.1 and 23.2) will fail with an error: api-bind-telnetSo i have to stand at version 22.6 Is that because of removing api telnet from 23.x of course I am not mining with any special parametrs, nor scripts. Just overclocked cards with MSI Afterburner and running NH with manual benchmarksof cards) Am I the only one, who want to use this miner working through the NH app? 22.1 and all the previous versions were amazing and good working. Now the actual versions since 23.x cannot start. I dont know, why their app want to find this "telnet" parameter I really dont want to stay at the old version of excavator only because the Nicehash devs are... "whatever"... |
|
|
|
I am mining through Nicehash, so I put the parameter to the NH (settings in excavator field) as always with other pamaters
Mining 3 hours, but no counter in statistic...
looks like actually you not passed this parameter to miner, it should be appear after first stats output Yes... it looks like "extra launch parameters" field in NH settings is not functional |
|
|
|
GMiner v2.61 available for download
v2.61
+ contest, use GMiner and win ETH, read contest rules below
I am mining through Nicehash, so I put the parameter to the NH (settings in excavator field) as always with other pamaters Mining 3 hours, but no counter in statistic... |
|
|
|
Hi.
Im running 0.20.3 with a 3080 and the Wattage reporting is 0 (P:0W)
Anyone knows why i cant see the power consumption?
Also, the efficiency is not even shown.
Regards.
Any help here? Thanks. Try to copy nvml.dll from nVidia directory (ProgramFiles) to the mining directory of the excavator... it helped me |
|
|
|
My 3060 on the way , I just think to put this gpu to my desktop replace my 1060 6gb pc
but i see 3060 not bad hashrate but they used lolminer
T-rex support 3060 and unlocked ?
Its about GPU driver for RTX 3060. For ETHash you need 470.05 beta - this is the driver without ETHash nerf... Other algos are untouched and with full speed (with normal drivers too). I have it and posted it here, but was blamed bcs of security, so beware of fake links and viruses |
|
|
|
Hello o7 I am trying to mine some ETC Clasic but miner fail to generate DAG say: 06:19:22 Started Mining on GPU0: GIGABYTE NVIDIA GeForce GTX 1060 3GB [0000:01:00.0] 06:19:24 Error on GPU0: out of memory 06:19:24 Stopped Mining on GPU0 06:19:26 Miner terminated, watchdog will restart process after 10 seconds Acording https://minerstat.com/dag-size-calculator => ETC actual DAG size = 2648 so a simple math means this 3000 - 2648 = 352 Mb free, GPU-Z it say 151 mb it is use by default even with that there suppose to be inaff VRAM to be use. p.s. GPU what i use for this is a secondary one, for main usage i have other one ... cheers Do you have primary GPU for example aka integreted from CPU? Else there should be this error bcs of memory allocated for the first GPU... |
|
|
|
Well he fixed the issues with a new beta!
Tell them to go to the github and click on the beta...you posting links is not to be trusted.... although i believe it is correct..you need to understand many people post malicious links and only the posts from the dev himself are to be trusted for links to mining software. works like a charm (at least for me with previously bad detection RTX 2080 and 2080S), thanks to devs... |
|
|
|
GMiner v2.50 available for download
v2.50
Still no response/answers from developers? 4.50 is bugged |
|
|
|
Does this miner support and RX 580/570 cards to mine Raven. when ever I try to use it, I get this error message!
12:01:14 Failed to initialize miner on GPU0: MSI Radeon RX 570 Series 4GB [0000:01:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU1: ASUS Radeon RX 570 Series 4GB [0000:04:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU2: SAPPHIRE AMD Radeon (TM) RX 470 Graphics 4GB [0000:05:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU3: SAPPHIRE Radeon RX 570 Series 4GB [0000:06:00.0]: Device not supported for this algorithm
12:01:14 No devices for mining
thanks
you need used linux Ravencoin doesnt have big DAG, so 4GB cards are OK, for example ETC, BeamhashIII and others... |
|
|
|
2.50 is broken.
Not reporting to the pool but mining
...i have similar problem RTX 2080 cannot start - miner stops right before cards recognizing. No "green" list with card names. my other cards are OK (2070 and 2070S, 2080S, 30xx) |
|
|
|
I can confirm, that RTX 3060 12GB with driver version 470.05
memory +1000
ETHash algo - 47.7MH/s
happy mining
If anyone wants to download this driver, there is a ZIP package. https://webshare.cz/#/file/b9ddT7wy5uOf course - beware of faked links, viruses etc - blah blah, you know. I had to install this driver manually, not with installator. I have few 3060 12GB cards - Palit Dual OC. All of those cards must have dummy plugs (or monitors) and be in x16 port (or x16 riser) After that i have the speed written above ( about 47.8MH/s Phoenix 5.5c) happy mining, bros... |
|
|
|
|
I can confirm, that RTX 3060 12GB with driver version 470.05
memory +1000
ETHash algo - 47.7MH/s
happy mining
|
|
|
|
|
I can confirm, that RTX 3060 12GB with driver version 470.05
memory +1000
ETHash algo - 47.7MH/s
happy mining
|
|
|
|
I see in my log file:
"Dag has been damaged" - what does it mean?
Lower your overclock until this message is gone. I have these warnings too... This error message appears in this version suddenly. There werent any with 2.46, 2.45 etc with THE SAME OC settings on cards... |
|
|
|
What about the 3060 cards?
Is Phoenix already optimized for them? Just offer to buy cheap rig for 3060.
Thanks
Well - i had a chance to test RTX 3060 12GB (Palit Dual) DaggerHashimoto - 24.8 MH/s (Power 141W) So there is really nerf for ETHash algos (tested also with Gminer and NBminer)... sad, but other coins are untouched  Just info about other algos: PowerLimit to 100pct to see basic wattage during mining Core: no overclock Memory: +1000 Gminer 2.45Zhash (144,5) - 64.9 Sol/s (Power 166W) (miniZ 66 Sol/s) GrinCuckatoo - 1.24 G/s (Power 169W) CuckooCycle - 7.19 G/s (Power 162W) Cuckatoo32 - 0.47 G/s (Power 169W) KawPow - 23.7 MH/s (Power 167W) BeamV3 - 22.3 Sol/s (Power 169W) (miniZ 23.4 Sol/s) TRex 0.19.11Octopus - 44.91 MH/sHappy Mining to all Sorry for offtopic, only reply to one, who asked about 3060... ---continue to mine with Phoenix---cause it rulez---- |
|
|
|
|
