|
101
|
Bitcoin / Mining speculation / Re: Back after a long delay - curious why mine vs. just buy in 2020?
|
on: May 11, 2020, 11:56:32 PM
|
|
I have a power rate of 6.8c/kWh. I was running 100% profit ratio prior to today. Today, I'm at break even, but a reduction in network hashrate could change that.
I count my miner cost at zero, because i used trading profits to buy them.
Mining gives me a fixed cost, or fixed monthly input towards an investment. I plan to hold for at least 7 years when I hit my retirement date. Kind of like my elected contribution towards a 401k.
I can take tax deductions by filing taxes as a business operation.
And it only one of my long term investments.
|
|
|
|
|
102
|
Bitcoin / Mining support / Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
|
on: May 10, 2020, 12:06:18 PM
|
Thanks so much for your help and sharing of knowledge. Log looks good so far:
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12892K (cce6a000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 237714726
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 31/15, WL threshold: 4096, image sequence number: 3265111179
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
random: nonblocking pool is initialized
macb e000b000.ethernet eth0: link down
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
2020-05-09 22:33:00 driver-btm-api.c:741:init_freq_mode: This is scan-user version
2020-05-09 22:33:00 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
2020-05-09 22:33:00 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
2020-05-09 22:33:00 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-05-09 22:33:00 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
2020-05-09 22:33:00 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
2020-05-09 22:33:00 driver-btm-api.c:2045:show_sn: len:16, 8108ed0c2b10481c
2020-05-09 22:33:00 driver-btm-api.c:2423:bitmain_soc_init: show sn return 1
2020-05-09 22:33:00 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return 1
2020-05-09 22:33:00 driver-btm-api.c:2103:handle_sn_for_factory_mode: read sn success, 8108ed0c2b10481c
2020-05-09 22:33:00 fan.c:279:front_fan_power_on: Note: front fan is power on!
2020-05-09 22:33:00 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
2020-05-09 22:33:00 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
2020-05-09 22:33:00 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-05-09 22:33:06 driver-btm-api.c:1201:init_miner_version: miner ID : 8108ed0c2b10481c
2020-05-09 22:33:06 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
2020-05-09 22:33:12 driver-btm-api.c:799:get_product_id: product_id[0] = 0
2020-05-09 22:33:12 driver-btm-api.c:799:get_product_id: product_id[1] = 0
2020-05-09 22:33:12 driver-btm-api.c:799:get_product_id: product_id[2] = 0
2020-05-09 22:33:12 driver-btm-api.c:2196:update_conf_by_power_feedback: Power feedback is disabled
2020-05-09 22:33:12 driver-btm-api.c:2200:update_conf_by_power_feedback: get_calibration_voltage, vol:1970.
2020-05-09 22:33:12 frequency.c:1366:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2020-05-09 22:33:12 thread.c:1066:create_read_nonce_reg_thread: create thread
2020-05-09 22:33:18 driver-btm-api.c:1201:init_miner_version: miner ID : 8108ed0c2b10481c
2020-05-09 22:33:18 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
2020-05-09 22:33:23 driver-btm-api.c:799:get_product_id: product_id[0] = 0
2020-05-09 22:33:23 driver-btm-api.c:799:get_product_id: product_id[1] = 0
2020-05-09 22:33:23 driver-btm-api.c:799:get_product_id: product_id[2] = 0
2020-05-09 22:33:23 driver-btm-api.c:754:_set_project_type: project:0
2020-05-09 22:33:23 driver-btm-api.c:775:_set_project_type: Project type: Antminer S17+
2020-05-09 22:33:23 driver-btm-api.c:786:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-05-09 22:33:23 driver-btm-api.c:787:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-05-09 22:33:23 driver-btm-api.c:786:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-05-09 22:33:23 driver-btm-api.c:787:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-05-09 22:33:23 driver-btm-api.c:786:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-05-09 22:33:23 driver-btm-api.c:787:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-05-09 22:33:23 driver-btm-api.c:2334:bitmain_board_init: Fan check passed.
2020-05-09 22:33:24 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-05-09 22:33:26 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-05-09 22:33:27 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-05-09 22:33:29 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-05-09 22:33:30 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-05-09 22:33:32 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-05-09 22:33:32 thread.c:1061:create_pic_heart_beat_thread: create thread
2020-05-09 22:33:32 power_api.c:213:power_init: Power init:
2020-05-09 22:33:32 power_api.c:214:power_init: current_voltage_raw = 0
2020-05-09 22:33:32 power_api.c:215:power_init: highest_voltage_raw = 2100
2020-05-09 22:33:32 power_api.c:216:power_init: working_voltage_raw = 1950
2020-05-09 22:33:32 power_api.c:217:power_init: higher_voltage_raw = 2040
2020-05-09 22:33:32 power_api.c:218:power_init: check_asic_voltage_raw = 2100
2020-05-09 22:33:32 driver-btm-api.c:2344:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-05-09 22:34:04 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-05-09 22:34:30 power_api.c:85:check_voltage_multi: retry time: 0
2020-05-09 22:34:31 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.078507
2020-05-09 22:34:32 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.151866
2020-05-09 22:34:33 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.124679
2020-05-09 22:34:33 power_api.c:53:_get_avg_voltage: average_voltage = 21.118350
2020-05-09 22:34:33 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.12, check voltage passed.
2020-05-09 22:34:33 uart.c:72:set_baud: set fpga_baud to 115200
2020-05-09 22:34:44 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-05-09 22:34:56 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2020-05-09 22:35:07 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2020-05-09 22:35:15 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-05-09 22:35:15 driver-btm-api.c:397:set_order_clock: chain[0]: set order clock, stragegy 3
2020-05-09 22:35:15 driver-btm-api.c:397:set_order_clock: chain[1]: set order clock, stragegy 3
2020-05-09 22:35:15 driver-btm-api.c:397:set_order_clock: chain[2]: set order clock, stragegy 3
2020-05-09 22:35:16 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-05-09 22:35:16 driver-btm-api.c:1854:check_clock_counter: freq 50 clock_counter_limit 6
2020-05-09 22:35:16 voltage[0] = 1960
2020-05-09 22:35:16 voltage[1] = 1960
2020-05-09 22:35:16 voltage[2] = 1960
2020-05-09 22:35:16 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960
2020-05-09 22:35:17 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-05-09 22:35:19 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2020-05-09 22:35:20 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2020-05-09 22:35:20 uart.c:72:set_baud: set fpga_baud to 12000000
2020-05-09 22:35:21 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 24
2020-05-09 22:35:21 thread.c:1081:create_check_miner_status_thread: create thread
2020-05-09 22:35:21 thread.c:1071:create_show_miner_status_thread: create thread
2020-05-09 22:35:21 thread.c:1051:create_temperature_monitor_thread: create thread
2020-05-09 22:35:21 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-05-09 22:35:21 driver-btm-api.c:1727:send_null_work: [DEBUG] Send null work.
2020-05-09 22:35:21 thread.c:1041:create_asic_status_monitor_thread: create thread
2020-05-09 22:35:21 frequency.c:1019:inc_freq_with_fixed_vco: chain = 255, freq = 510, is_higher_voltage = true
2020-05-09 22:35:41 frequency.c:1061:inc_freq_with_fixed_step: chain = 0, freq_start = 510, freq_end = 530, freq_step = 5, is_higher_voltage = true
2020-05-09 22:35:45 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2020-05-09 22:35:47 power_api.c:85:check_voltage_multi: retry time: 0
2020-05-09 22:35:48 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.907335
2020-05-09 22:35:49 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.929306
2020-05-09 22:35:50 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.902438
2020-05-09 22:35:50 power_api.c:53:_get_avg_voltage: average_voltage = 20.913027
2020-05-09 22:35:50 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.91, check voltage passed.
2020-05-09 22:35:54 frequency.c:1061:inc_freq_with_fixed_step: chain = 2, freq_start = 510, freq_end = 530, freq_step = 5, is_higher_voltage = true
2020-05-09 22:36:02 frequency.c:1061:inc_freq_with_fixed_step: chain = 0, freq_start = 530, freq_end = 540, freq_step = 5, is_higher_voltage = true
2020-05-09 22:36:06 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
2020-05-09 22:36:08 power_api.c:85:check_voltage_multi: retry time: 0
2020-05-09 22:36:10 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.760617
2020-05-09 22:36:11 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.831620
2020-05-09 22:36:12 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.780487
2020-05-09 22:36:12 power_api.c:53:_get_avg_voltage: average_voltage = 20.790908
2020-05-09 22:36:12 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.79, check voltage passed.
2020-05-09 22:36:12 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 0, start = 540, freq_step = 5
2020-05-09 22:36:19 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 1, start = 510, freq_step = 5
2020-05-09 22:36:24 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 2, start = 530, freq_step = 5
2020-05-09 22:36:30 driver-btm-api.c:727:set_timeout: freq = 590, percent = 90, hcn = 44236, timeout = 74
2020-05-09 22:36:30 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step.
2020-05-09 22:36:35 power_api.c:85:check_voltage_multi: retry time: 0
2020-05-09 22:36:36 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.586872
2020-05-09 22:36:37 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.659384
2020-05-09 22:36:38 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.610540
2020-05-09 22:36:38 power_api.c:53:_get_avg_voltage: average_voltage = 19.618932
2020-05-09 22:36:38 power_api.c:71:check_voltage: target_vol = 19.60, actural_vol = 19.62, check voltage passed.
2020-05-09 22:36:38 thread.c:1076:create_check_system_status_thread: create thread
2020-05-09 22:36:39 driver-btm-api.c:2577:bitmain_soc_init: Init done!
2020-05-09 22:36:39 driver-btm-api.c:216:set_miner_status: STATUS_INIT
2020-05-09 22:36:43 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
2020-05-09 22:36:44 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 70780
2020-05-09 22:36:44 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 70000
2020-05-09 22:36:48 driver-btm-api.c:1458:dhash_chip_send_job: Version num 4.
2020-05-09 22:36:48 driver-btm-api.c:1606:dhash_chip_send_job: stime.tv_sec 1589063808, block_ntime 1589063797
2020-05-09 23:06:49 thread.c:257:calc_hashrate_avg: avg rate is 72269.23 in 30 mins
2020-05-09 23:06:49 temperature.c:516:temp_statistics_show: pcb temp 39~63 chip temp 57~79
2020-05-09 23:36:51 thread.c:257:calc_hashrate_avg: avg rate is 72034.49 in 30 mins
2020-05-09 23:36:51 temperature.c:516:temp_statistics_show: pcb temp 39~63 chip temp 56~79
2020-05-10 00:06:53 thread.c:257:calc_hashrate_avg: avg rate is 72525.06 in 30 mins
2020-05-10 00:06:53 temperature.c:516:temp_statistics_show: pcb temp 39~63 chip temp 57~79
2020-05-10 00:36:55 thread.c:257:calc_hashrate_avg: avg rate is 72206.55 in 30 mins
2020-05-10 00:36:55 temperature.c:516:temp_statistics_show: pcb temp 40~64 chip temp 57~79
2020-05-10 01:06:57 thread.c:257:calc_hashrate_avg: avg rate is 72373.74 in 30 mins
2020-05-10 01:06:57 temperature.c:516:temp_statistics_show: pcb temp 40~64 chip temp 58~80
2020-05-10 01:36:59 thread.c:257:calc_hashrate_avg: avg rate is 72084.52 in 30 mins
2020-05-10 01:36:59 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 58~79
2020-05-10 02:07:01 thread.c:257:calc_hashrate_avg: avg rate is 72276.11 in 30 mins
2020-05-10 02:07:01 temperature.c:516:temp_statistics_show: pcb temp 39~63 chip temp 57~79
2020-05-10 02:37:03 thread.c:257:calc_hashrate_avg: avg rate is 72427.43 in 30 mins
2020-05-10 02:37:03 temperature.c:516:temp_statistics_show: pcb temp 39~64 chip temp 57~79
2020-05-10 03:07:05 thread.c:257:calc_hashrate_avg: avg rate is 72172.38 in 30 mins
2020-05-10 03:07:05 temperature.c:516:temp_statistics_show: pcb temp 39~64 chip temp 57~80
2020-05-10 03:37:07 thread.c:257:calc_hashrate_avg: avg rate is 72237.06 in 30 mins
2020-05-10 03:37:07 temperature.c:516:temp_statistics_show: pcb temp 39~64 chip temp 57~80
2020-05-10 04:07:09 thread.c:257:calc_hashrate_avg: avg rate is 72478.07 in 30 mins
2020-05-10 04:07:09 temperature.c:516:temp_statistics_show: pcb temp 40~64 chip temp 58~80
2020-05-10 04:37:11 thread.c:257:calc_hashrate_avg: avg rate is 72410.35 in 30 mins
2020-05-10 04:37:11 temperature.c:516:temp_statistics_show: pcb temp 39~63 chip temp 57~80
2020-05-10 05:07:13 thread.c:257:calc_hashrate_avg: avg rate is 72040.27 in 30 mins
2020-05-10 05:07:13 temperature.c:516:temp_statistics_show: pcb temp 39~64 chip temp 57~80
2020-05-10 05:37:16 thread.c:257:calc_hashrate_avg: avg rate is 72515.90 in 30 mins
2020-05-10 05:37:16 temperature.c:516:temp_statistics_show: pcb temp 40~64 chip temp 58~80
2020-05-10 06:07:17 thread.c:257:calc_hashrate_avg: avg rate is 72201.67 in 30 mins
2020-05-10 06:07:17 temperature.c:516:temp_statistics_show: pcb temp 39~63 chip temp 58~79
2020-05-10 06:37:20 thread.c:257:calc_hashrate_avg: avg rate is 72211.43 in 30 mins
2020-05-10 06:37:20 temperature.c:516:temp_statistics_show: pcb temp 39~63 chip temp 58~79
2020-05-10 07:07:22 thread.c:257:calc_hashrate_avg: avg rate is 72297.47 in 30 mins
2020-05-10 07:07:22 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 58~80
2020-05-10 07:37:24 thread.c:257:calc_hashrate_avg: avg rate is 72406.68 in 30 mins
2020-05-10 07:37:24 temperature.c:516:temp_statistics_show: pcb temp 40~65 chip temp 58~80
2020-05-10 08:07:26 thread.c:257:calc_hashrate_avg: avg rate is 72187.64 in 30 mins
2020-05-10 08:07:26 temperature.c:516:temp_statistics_show: pcb temp 39~64 chip temp 58~79
2020-05-10 08:37:28 thread.c:257:calc_hashrate_avg: avg rate is 72241.33 in 30 mins
2020-05-10 08:37:28 temperature.c:516:temp_statistics_show: pcb temp 39~64 chip temp 58~80
2020-05-10 09:07:30 thread.c:257:calc_hashrate_avg: avg rate is 72516.51 in 30 mins
2020-05-10 09:07:30 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 58~80
2020-05-10 09:37:32 thread.c:257:calc_hashrate_avg: avg rate is 72341.40 in 30 mins
2020-05-10 09:37:32 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 57~80
2020-05-10 10:07:34 thread.c:257:calc_hashrate_avg: avg rate is 72287.09 in 30 mins
2020-05-10 10:07:34 temperature.c:516:temp_statistics_show: pcb temp 40~64 chip temp 58~79
2020-05-10 10:37:36 thread.c:257:calc_hashrate_avg: avg rate is 72598.28 in 30 mins
2020-05-10 10:37:36 temperature.c:516:temp_statistics_show: pcb temp 40~64 chip temp 57~80
2020-05-10 11:07:38 thread.c:257:calc_hashrate_avg: avg rate is 72505.53 in 30 mins
2020-05-10 11:07:38 temperature.c:516:temp_statistics_show: pcb temp 39~64 chip temp 58~80
2020-05-10 11:37:40 thread.c:257:calc_hashrate_avg: avg rate is 72204.11 in 30 mins
2020-05-10 11:37:40 temperature.c:516:temp_statistics_show: pcb temp 40~64 chip temp 58~80
|
|
|
|
|
103
|
Bitcoin / Mining support / Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
|
on: May 09, 2020, 02:25:04 AM
|
|
I'm at work now, I'll look into the network aspect tomorrow.
This unit is brand new. Arrived 7 days ago.
And, 3 of my 5 units are still under warranty. So I'm only running factory firmware/settings while still covered. So no overclocking for me. Also, I'm better with electrical than electronic, so I'm not comfortable messing with computer settings and programs I don't understand. #OPP (Old People Problems). BetaMax VCR was the height of my technical knowledge.
Edit:
So I swapped out the Ethernet cable, using a cable known to be working fine with another unit. Then had another thought..... I initially assigned this unit a worker name for the pool that I had previously used for an old unit which I have since sold. Dont know if that could cause confusion with the pool. Assigned it a completely new worker name not previously used.
Rebooted and so far we're ok. We'll see for how long. No crc reg error yet. It also read all the boards temp sensors correctly this time.
|
|
|
|
|
104
|
Bitcoin / Mining support / Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
|
on: May 08, 2020, 11:31:05 PM
|
|
Thats kinda the plan. An extra 43TH is better than none. Miner was almost "free" with the account credit I had at Bitmain.
And with the power plan (described in another post somewhere) that I have..... my price per kWh decreases with the extra power use. Adding this miner dropped me from approx 7.2c to 6.8c.
|
|
|
|
|
105
|
Bitcoin / Mining support / Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
|
on: May 08, 2020, 11:20:55 PM
|
Well, thought I had my issue under control with the temp sensor error. After multiple reboots, I reloaded the firmware. It ran a bit and threw the error. Then ran almost a day before the error. Ran another 3 days before the next error today. Did a few reboots with no luck. S17+ 70 So, being new, I plan to send it back for repair. But the other thing thats getting me, that Ive never seen in any other miner is this error: 2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc errorWhether it throws the temp sensor error or not..... I get that reg crc error. Ive searched and cant find what it means. It will appear in the log hundreds of times, one after another. I just did another reboot, this time pointing it at a new pool. Dont see the reg crc error, but still giving me the temp sensor error on one board. Edit: nope. Did another reboot an it came back. So the pool had nothing to do with it. Here's a little sampling: et_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
2020-05-08 23:24:57 register.c:306:get_register: !!! reg crc error
|
|
|
|
|
106
|
Bitcoin / Mining support / Re: Antminer T17/S17 Temp Sensor problem discussion.
|
on: May 03, 2020, 07:19:39 PM
|
S17+ 70 3:29 elapsed now 3:40 elapsed... dropped the board 2020-05-03 15:52:17 driver-btm-api.c:2577:bitmain_soc_init: Init done!
2020-05-03 15:52:17 driver-btm-api.c:216:set_miner_status: STATUS_INIT
2020-05-03 15:52:23 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
2020-05-03 15:52:24 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 70780
2020-05-03 15:52:24 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 70000
2020-05-03 15:52:27 driver-btm-api.c:1458:dhash_chip_send_job: Version num 4.
2020-05-03 15:52:27 driver-btm-api.c:1606:dhash_chip_send_job: stime.tv_sec 1588521147, block_ntime 1588521135
2020-05-03 16:22:29 thread.c:257:calc_hashrate_avg: avg rate is 72271.06 in 30 mins
2020-05-03 16:22:29 temperature.c:516:temp_statistics_show: pcb temp 42~66 chip temp 61~79
2020-05-03 16:52:31 thread.c:257:calc_hashrate_avg: avg rate is 72094.89 in 30 mins
2020-05-03 16:52:31 temperature.c:516:temp_statistics_show: pcb temp 43~67 chip temp 62~80
2020-05-03 17:22:33 thread.c:257:calc_hashrate_avg: avg rate is 72515.29 in 30 mins
2020-05-03 17:22:33 temperature.c:516:temp_statistics_show: pcb temp 42~66 chip temp 61~80
2020-05-03 17:52:35 thread.c:257:calc_hashrate_avg: avg rate is 72144.32 in 30 mins
2020-05-03 17:52:35 temperature.c:516:temp_statistics_show: pcb temp 42~66 chip temp 60~80
2020-05-03 18:22:37 thread.c:257:calc_hashrate_avg: avg rate is 71985.06 in 30 mins
2020-05-03 18:22:37 temperature.c:516:temp_statistics_show: pcb temp 44~68 chip temp 61~80
2020-05-03 18:52:39 thread.c:257:calc_hashrate_avg: avg rate is 72061.94 in 30 mins
2020-05-03 18:52:39 temperature.c:516:temp_statistics_show: pcb temp 43~66 chip temp 61~78
2020-05-03 19:22:41 thread.c:257:calc_hashrate_avg: avg rate is 72222.42 in 30 mins
2020-05-03 19:22:41 temperature.c:516:temp_statistics_show: pcb temp 44~67 chip temp 61~79
2020-05-03 19:29:10 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 7, require 65, failed times 1: ooooo ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 19:29:12 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2020-05-03 19:29:12 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 0
2020-05-03 19:29:12 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 7, require 65, failed times 1: ooooo ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 19:29:12 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-05-03 19:29:13 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 0
2020-05-03 19:29:13 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-05-03 19:29:13 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0
2020-05-03 19:29:14 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-05-03 19:29:14 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2020-05-03 19:29:14 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0
2020-05-03 19:29:14 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 7, require 65, failed times 1: ooooo ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 19:29:14 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-05-03 19:29:15 temperature.c:865:get_temp_info: ERROR: chain 0 can get NONE temp info or temp value abnormal, power it off
2020-05-03 19:29:16 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 2 times.
2020-05-03 19:29:16 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 7, require 65, failed times 1: ooooo ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 19:29:17 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 46420
2020-05-03 19:29:17 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 46000 Edit: Rebooted once after the error. And we're up and running. So, to summarize....... after a dozen or so reboots, and factory reset, still randomly threw the error and dropped the board. Reflashed the firmware and it ran fine almost 4hrs til it threw the error. Did one reboot after that error, and it's running real nice 15+ hours and counting now. (And maybe I should start looking to miners other than Bitmain for less headaches) Edit: ran 20 hrs til it dropped the board this time. |
|
|
|
|
108
|
Bitcoin / Mining support / Re: Antminer T17/S17 Temp Sensor problem discussion.
|
on: May 03, 2020, 12:39:22 PM
|
I'm having the same issue. S17+ 70th arrived Friday. Unboxed and hooked it up and it ran fine for almost a day. Saturday afternoon, I notice its only running 40th. It's dropping a board, after a temp sensor failure-to-read error. I've rebooted it a bunch of times and did a reset on it. It's still doing the same thing. I'll probably try a re-install of the firmware today. If that doesnt work, I'll just run it at 40th on 2 boards til the halving, then send it back for repair/replacement. It was an "extra" miner that I got, paid for almost entirely with account credit. Here, you can see at the bottom of the log, it restarts fine and runs 70th.... then after a time period (sometimes 10 seconds, sometimes 20 minutes), it drops a board after not detecting a temp sensor.
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12892K (cce6a000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 8/2, WL threshold: 4096, image sequence number: 237714726
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 3265111179
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-05-03 11:52:51 driver-btm-api.c:741:init_freq_mode: This is scan-user version
2020-05-03 11:52:51 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
2020-05-03 11:52:51 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
2020-05-03 11:52:51 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-05-03 11:52:51 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
2020-05-03 11:52:51 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
2020-05-03 11:52:51 driver-btm-api.c:2045:show_sn: len:16, 8108ed0c2b10481c
2020-05-03 11:52:51 driver-btm-api.c:2423:bitmain_soc_init: show sn return 1
2020-05-03 11:52:51 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return 1
2020-05-03 11:52:51 driver-btm-api.c:2103:handle_sn_for_factory_mode: read sn success, 8108ed0c2b10481c
2020-05-03 11:52:51 fan.c:279:front_fan_power_on: Note: front fan is power on!
2020-05-03 11:52:51 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
2020-05-03 11:52:51 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
2020-05-03 11:52:51 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-05-03 11:52:57 driver-btm-api.c:1201:init_miner_version: miner ID : 8108ed0c2b10481c
2020-05-03 11:52:57 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
2020-05-03 11:53:03 driver-btm-api.c:799:get_product_id: product_id[0] = 0
2020-05-03 11:53:03 driver-btm-api.c:799:get_product_id: product_id[1] = 0
2020-05-03 11:53:03 driver-btm-api.c:799:get_product_id: product_id[2] = 0
2020-05-03 11:53:03 driver-btm-api.c:2196:update_conf_by_power_feedback: Power feedback is disabled
2020-05-03 11:53:03 driver-btm-api.c:2200:update_conf_by_power_feedback: get_calibration_voltage, vol:1970.
2020-05-03 11:53:03 frequency.c:1366:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2020-05-03 11:53:03 thread.c:1066:create_read_nonce_reg_thread: create thread
2020-05-03 11:53:09 driver-btm-api.c:1201:init_miner_version: miner ID : 8108ed0c2b10481c
2020-05-03 11:53:09 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
2020-05-03 11:53:14 driver-btm-api.c:799:get_product_id: product_id[0] = 0
2020-05-03 11:53:14 driver-btm-api.c:799:get_product_id: product_id[1] = 0
2020-05-03 11:53:14 driver-btm-api.c:799:get_product_id: product_id[2] = 0
2020-05-03 11:53:14 driver-btm-api.c:754:_set_project_type: project:0
2020-05-03 11:53:14 driver-btm-api.c:775:_set_project_type: Project type: Antminer S17+
2020-05-03 11:53:14 driver-btm-api.c:786:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-05-03 11:53:14 driver-btm-api.c:787:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-05-03 11:53:14 driver-btm-api.c:786:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-05-03 11:53:14 driver-btm-api.c:787:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-05-03 11:53:14 driver-btm-api.c:786:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-05-03 11:53:14 driver-btm-api.c:787:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-05-03 11:53:16 driver-btm-api.c:2334:bitmain_board_init: Fan check passed.
2020-05-03 11:53:17 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-05-03 11:53:19 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-05-03 11:53:20 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-05-03 11:53:22 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-05-03 11:53:23 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-05-03 11:53:25 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-05-03 11:53:25 thread.c:1061:create_pic_heart_beat_thread: create thread
2020-05-03 11:53:25 power_api.c:213:power_init: Power init:
2020-05-03 11:53:25 power_api.c:214:power_init: current_voltage_raw = 0
2020-05-03 11:53:25 power_api.c:215:power_init: highest_voltage_raw = 2100
2020-05-03 11:53:25 power_api.c:216:power_init: working_voltage_raw = 1950
2020-05-03 11:53:25 power_api.c:217:power_init: higher_voltage_raw = 2040
2020-05-03 11:53:25 power_api.c:218:power_init: check_asic_voltage_raw = 2100
2020-05-03 11:53:25 driver-btm-api.c:2344:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-05-03 11:53:25 power_api.c:186:power_off: init gpio907
2020-05-03 11:53:56 register.c:306:get_register: !!! reg crc error
2020-05-03 11:53:56 register.c:306:get_register: !!! reg crc error
2020-05-03 11:53:56 register.c:306:get_register: !!! reg crc error
2020-05-03 11:53:56 register.c:306:get_register: !!! reg crc error
2020-05-03 11:53:56 register.c:306:get_register: !!! reg crc error
2020-05-03 11:53:57 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-05-03 11:54:23 power_api.c:85:check_voltage_multi: retry time: 0
2020-05-03 11:54:24 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.078507
2020-05-03 11:54:25 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.124679
2020-05-03 11:54:26 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.124679
2020-05-03 11:54:26 power_api.c:53:_get_avg_voltage: average_voltage = 21.109288
2020-05-03 11:54:26 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.11, check voltage passed.
2020-05-03 11:54:26 uart.c:72:set_baud: set fpga_baud to 115200
2020-05-03 11:54:38 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-05-03 11:54:49 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2020-05-03 11:55:00 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2020-05-03 11:55:08 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-05-03 11:55:08 driver-btm-api.c:397:set_order_clock: chain[0]: set order clock, stragegy 3
2020-05-03 11:55:08 driver-btm-api.c:397:set_order_clock: chain[1]: set order clock, stragegy 3
2020-05-03 11:55:08 driver-btm-api.c:397:set_order_clock: chain[2]: set order clock, stragegy 3
2020-05-03 11:55:09 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-05-03 11:55:09 driver-btm-api.c:1854:check_clock_counter: freq 50 clock_counter_limit 6
2020-05-03 11:55:09 voltage[0] = 1960
2020-05-03 11:55:09 voltage[1] = 1960
2020-05-03 11:55:09 voltage[2] = 1960
2020-05-03 11:55:09 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960
2020-05-03 11:55:10 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-05-03 11:55:12 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2020-05-03 11:55:13 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2020-05-03 11:55:13 uart.c:72:set_baud: set fpga_baud to 12000000
2020-05-03 11:55:14 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 25
2020-05-03 11:55:14 thread.c:1081:create_check_miner_status_thread: create thread
2020-05-03 11:55:14 thread.c:1071:create_show_miner_status_thread: create thread
2020-05-03 11:55:14 thread.c:1051:create_temperature_monitor_thread: create thread
2020-05-03 11:55:14 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-05-03 11:55:14 driver-btm-api.c:1727:send_null_work: [DEBUG] Send null work.
2020-05-03 11:55:14 thread.c:1041:create_asic_status_monitor_thread: create thread
2020-05-03 11:55:14 frequency.c:1019:inc_freq_with_fixed_vco: chain = 255, freq = 510, is_higher_voltage = true
2020-05-03 11:55:27 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2020-05-03 11:55:29 power_api.c:85:check_voltage_multi: retry time: 0
2020-05-03 11:55:30 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.931788
2020-05-03 11:55:31 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.978150
2020-05-03 11:55:32 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.978150
2020-05-03 11:55:32 power_api.c:53:_get_avg_voltage: average_voltage = 20.962696
2020-05-03 11:55:32 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.96, check voltage passed.
2020-05-03 11:55:39 frequency.c:1061:inc_freq_with_fixed_step: chain = 0, freq_start = 510, freq_end = 530, freq_step = 5, is_higher_voltage = true
2020-05-03 11:55:47 frequency.c:1061:inc_freq_with_fixed_step: chain = 2, freq_start = 510, freq_end = 530, freq_step = 5, is_higher_voltage = true
2020-05-03 11:55:55 frequency.c:1061:inc_freq_with_fixed_step: chain = 0, freq_start = 530, freq_end = 540, freq_step = 5, is_higher_voltage = true
2020-05-03 11:55:59 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
2020-05-03 11:56:01 power_api.c:85:check_voltage_multi: retry time: 0
2020-05-03 11:56:03 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.785070
2020-05-03 11:56:04 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.807198
2020-05-03 11:56:05 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.780487
2020-05-03 11:56:05 power_api.c:53:_get_avg_voltage: average_voltage = 20.790919
2020-05-03 11:56:05 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.79, check voltage passed.
2020-05-03 11:56:05 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 0, start = 540, freq_step = 5
2020-05-03 11:56:12 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 1, start = 510, freq_step = 5
2020-05-03 11:56:17 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 2, start = 530, freq_step = 5
2020-05-03 11:56:23 driver-btm-api.c:727:set_timeout: freq = 590, percent = 90, hcn = 44236, timeout = 74
2020-05-03 11:56:23 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step.
2020-05-03 11:56:28 power_api.c:85:check_voltage_multi: retry time: 0
2020-05-03 11:56:29 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.612114
2020-05-03 11:56:30 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.634962
2020-05-03 11:56:31 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.634962
2020-05-03 11:56:31 power_api.c:53:_get_avg_voltage: average_voltage = 19.627346
2020-05-03 11:56:31 power_api.c:71:check_voltage: target_vol = 19.60, actural_vol = 19.63, check voltage passed.
2020-05-03 11:56:31 thread.c:1076:create_check_system_status_thread: create thread
2020-05-03 11:56:32 driver-btm-api.c:2577:bitmain_soc_init: Init done!
2020-05-03 11:56:32 driver-btm-api.c:216:set_miner_status: STATUS_INIT
2020-05-03 11:56:36 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
2020-05-03 11:56:37 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 70780
2020-05-03 11:56:37 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 70000
2020-05-03 11:56:41 driver-btm-api.c:1458:dhash_chip_send_job: Version num 4.
2020-05-03 11:56:41 driver-btm-api.c:1606:dhash_chip_send_job: stime.tv_sec 1588507001, block_ntime 1588506981
2020-05-03 12:13:23 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 7, require 65, failed times 1: ooooo ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 12:13:24 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 0
2020-05-03 12:13:24 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1
2020-05-03 12:13:24 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2020-05-03 12:13:25 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 0
2020-05-03 12:13:25 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 7, require 65, failed times 1: ooooo ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 12:13:25 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1
2020-05-03 12:13:25 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0
2020-05-03 12:13:26 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-05-03 12:13:26 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0
2020-05-03 12:13:26 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2020-05-03 12:13:26 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-05-03 12:13:27 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 7, require 65, failed times 1: ooooo ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 12:13:27 temperature.c:865:get_temp_info: ERROR: chain 0 can get NONE temp info or temp value abnormal, power it off
2020-05-03 12:13:29 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 46420
2020-05-03 12:13:29 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 46000
2020-05-03 12:26:43 thread.c:257:calc_hashrate_avg: avg rate is 61141.64 in 30 mins
2020-05-03 12:26:43 temperature.c:516:temp_statistics_show: pcb temp 42~67 chip temp 61~80
|
|
|
|
|
109
|
Bitcoin / Mining support / Re: T17/S17 malfunction: cases, solutions, remedies, RMA history
|
on: May 03, 2020, 12:35:57 AM
|
What fresh hell is this? Ran fine for about 16hrs out of the box.... then I dropped one board due to the temp sensor error. Now this crc error. Been thru about a dozen reboots. Comes up runs all 3 boards fine for about 20 min, then drops the one. Also did a reset via interface. 2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:25:10 register.c:306:get_register: !!! reg crc error
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 679740416
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 545719296
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 1049232384
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 898434048
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 663749632
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 798163968
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 932578304
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 983106560
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 580649984
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 715064320
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 547488768
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 732234752
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 900203520
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 1034617856
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 632161280
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 615580672
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 1018430464
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 884409344
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 716833792
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 566035456
2020-05-03 00:31:23 register.c:313:get_register: !!! REG_TYPE = 1. 1052771328
2020-05-03 00:32:00 register.c:313:get_register: !!! REG_TYPE = 1. 806683648
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 806683648
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 773325824
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 639304704
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 1042154496
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 656475136
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 1059324928
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 925303808
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 690619392
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 573375488
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 808453120
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 942867456
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 540410880
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 758711296
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 893125632
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 1027539968
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 574751744
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 692388864
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 927466496
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 1061880832
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 659424256
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 642843648
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 1045693440
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 911672320
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 676987904
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 593298432
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 694158336
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 560137216
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 962987008
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 879297536
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 745276416
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 611255296
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 913441792
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 1031078912
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 595067904
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 729482240
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 863896576
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 813761536
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 679740416
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 545719296
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 1049232384
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 898434048
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 663749632
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 798163968
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 932578304
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 983106560
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 580649984
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 715064320
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 547488768
2020-05-03 00:32:51 register.c:313:get_register: !!! REG_TYPE = 1. 732234752
2020-05-03 00:34:51 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0
2020-05-03 00:34:52 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-05-03 00:34:52 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0
2020-05-03 00:34:52 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-05-03 00:34:52 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2020-05-03 00:34:53 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:34:54 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2020-05-03 00:34:55 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0
2020-05-03 00:34:55 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:34:55 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-05-03 00:34:55 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0
2020-05-03 00:34:56 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-05-03 00:34:56 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 2 times.
2020-05-03 00:34:57 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:34:58 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0
2020-05-03 00:34:58 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 3 times.
2020-05-03 00:34:59 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-05-03 00:34:59 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:34:59 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0
2020-05-03 00:34:59 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-05-03 00:35:01 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 4 times.
2020-05-03 00:35:01 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:35:02 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0
2020-05-03 00:35:02 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-05-03 00:35:03 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 5 times.
2020-05-03 00:35:03 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0
2020-05-03 00:35:03 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-05-03 00:35:03 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:35:05 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 6 times.
2020-05-03 00:35:05 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:35:05 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0
2020-05-03 00:35:06 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-05-03 00:35:06 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0
2020-05-03 00:35:06 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
2020-05-03 00:35:07 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 7 times.
2020-05-03 00:35:07 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:35:09 thread.c:996:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 8 times.
2020-05-03 00:35:09 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0
2020-05-03 00:35:09 thread.c:976:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 13, require 65, failed times 1: ooooo ooxxx ooooo oxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
2020-05-03 00:35:09 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1
2020-05-03 00:35:10 temperature.c:838:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0
|
|
|
|
|
110
|
Bitcoin / Hardware / Re: Bitmain Introduces the S17+ and T17+
|
on: May 02, 2020, 11:56:02 AM
|
Does anyone know the CFM or any measure of airflow required by the S17+? Thank you.
IIRC, each fan is around 250cfm. Intake and exhaust run as a team in parallel. So an upper set and a lower set.... the whole unit should be moving +/- 500 cfm. |
|
|
|
|
111
|
Bitcoin / Hardware / Re: Bitmain Introduces the S17+ and T17+
|
on: May 01, 2020, 09:09:12 PM
|
[...]
The miner arrived today. It was in Cincinnati yesterday, and DHL sent me a text with a link to pay a $49.23 import fee. (  ?). I paid that online yesterday. Doorbell rings today and DHL driver says they're running ahead of schedule. Will get it hooked up tonight. Edit: 5/2. Got it hooked up last night. Up and running just dandy. |
|
|
|
|
112
|
Bitcoin / Hardware / Re: Bitmain Introduces the S17+ and T17+
|
on: April 29, 2020, 02:33:54 AM
|
|
Apologies Mike.... I had to look back a few pages. I got you confused with that other guy that was posting all his negative opinions.
(OPP - Old People Problems
Check forum once every few days, see that same guy bashing.
See another negative post, dont look at user name before getting snippy)
|
|
|
|
|
113
|
Bitcoin / Hardware / Re: Bitmain Introduces the S17+ and T17+
|
on: April 29, 2020, 01:45:03 AM
|
... I am not sure about the 17 series, I have neither bought enough of them nor have I run them long enough to judge with accuracy.
Then why do you keep pushing your opinion, if you're going to add a little disclaimer that you dont have enough data to form an opinion? We got it, you read an article where Chinese miners report 30% failure rate. Got it. Thanks. I read articles reporting btc will go to 100k. I read articles reporting btc will drop to 2k. As with any piece of information on the internet, I trust it as much as I trust my government. |
|
|
|
|
114
|
Bitcoin / Hardware / Re: Bitmain Introduces the S17+ and T17+
|
on: April 29, 2020, 12:07:36 AM
|
|
Oh, I forgot to add two problems Ive had.
I overheated an s17e with bad air flow. It dropped a board and wouldnt detect one board until i did about 10 restarts. Then its been fine.
I also had an S9i last summer that did something (forget exactly what). But I disconnected the PSU, blew into the connectors like and old Atari cartridge, plugged it back in, and it was fine.
So theres that
|
|
|
|
|
116
|
Bitcoin / Hardware / Re: Bitmain Introduces the S17+ and T17+
|
on: April 27, 2020, 09:54:08 PM
|
I completed my order for an S17+ on Friday (4/24). ( Took some back n forth with Carol to get my account credit applied. Had enough credit that the miner was free, and I'm only paying $131 + tariff for this miner. ) But as of Fri 4/24, the order was marked as PAID. Today, Monday 4/27, I received notification that the order was shipped. DHL tracking has an ETA of Monday 5/4. I chose DHL shipping this time as it was about $80 cheaper than UPS, which I used for 4 previous orders. Summary
Waybill: xxxxxxxxxxx
Departed Facility in SHENZHEN - CHINA MAINLAND
Sign up for shipment notifications
Tuesday, April 28, 2020 at 02:17
Origin Service Area:
SHENZHEN - SHENZHEN - CHINA MAINLAND
Destination Service Area:
HARRISBURG, PA - READING - USA
Estimated Delivery:
Monday, May 04, 2020
By End of Day
1 Piece
Tuesday, April 28, 2020 Location Time Piece
3 Departed Facility in SHENZHEN - CHINA MAINLAND SHENZHEN - CHINA MAINLAND 02:17
1 Piece
2 Processed at SHENZHEN - CHINA MAINLAND SHENZHEN - CHINA MAINLAND 00:41
1 Piece
Monday, April 27, 2020 Location Time Piece
1 Shipment scheduled to be picked up SHENZHEN - CHINA MAINLAND 16:13
1 Piece
Hide Details
|
|
|
|
|
117
|
Bitcoin / Mining speculation / Re: Electric Rates.... look around in de-regulated states
|
on: April 23, 2020, 08:36:12 PM
|
Aren't they forbidden to go out due to quarantine measures? Are you sure they won't come later at you with some large bill?
Well i guess with most industries stopped, there should be some surplus.
Nobody is "FORBIDDEN" to go out. Some businesses are closed, but "essential" businesses are open. Power companies are essential, so they're still reading my meter and sending me bills. The terms and Conditions of the contract specifically say they cant change me extra for high usage, but they can drop me as a customer. |
|
|
|
|
118
|
Other / Politics & Society / Re: Patriarchy against millennials!
|
on: April 19, 2020, 08:18:32 PM
|
no more excuses. tell us what you have to offer
From what I see, he's got nothing to offer, except some regurgitated internet rhetoric. He says I sound like his mum. Well, at least I know someone in his family has common sense and isn't blaming their problems on someone else..... "The Man", "The Patriarchy", "Systematic Racism"....those are nothing but piss poor excuses. Join the military, learn some someone sense, skills, and discipline. Then look for a civil service job. Union protection, Pension, and above average pay scales. Unless you possess particular skills that will make you stand out, you're just another worker bee. |
|
|
|
|
120
|
Other / Politics & Society / Re: Patriarchy against millennials!
|
on: April 19, 2020, 01:41:08 AM
|
|
Angry, young, and mis-guided is a dangerous way to go thru life. Good luck
You want a job where everyone of the same merit makes the same money at the same rate and experience? Let me know, there's a ton of them out there.
|
|
|
|
|
Show Posts
