Show Posts
|
Pages: [1] 2 »
|
Could not fetch chain ID 34. Is your RPC URL correct?
|
|
|
So browsing through your github I see that this isn't your first coin... globalcurrency... enviromint?? I couldn't help but go on over to the old enviromint discord and see what all went down. It appears that that coin started off with a hidden virus thats steals wallet info. Followed by a mining pool that wouldn't issue any work to miners but mysteriously there was 1 ghost account that was able to mine no problem and no one knew who it was... Idk about you but that seems kinda familiar. For those that don't want to go dig up the old discord ill save you the time. It ended up with the "dev" dumping and abandoning the project without a single heads up to anyone
Thanks for the info. Very useful, especially for beginners! This is true, we did dump that project as it was flawed from the beginning. We launched without much experience using a coin that was built by WalletBuilders.com, and got in over our heads pretty quickly. We learned from our mistakes and have brought in people to help launch right this time. As we wear our black mark of shame for our first try, we can certainly move forward. Yes, we made a poor choice in launching on a pool that had some errors in setup and had rejected every block that was mined the first few hours, but some went on and mined solo from their own wallets. We wish we knew who the few wallets are that are receiving the majority of the coins, it’s certainly not us. Mining for us has little value beyond keeping the blockchain alive. And for fairness, we’ve shut staking down in our wallet as the premine would certainly have substantial weight on the network and not be a fair. We aren’t even mining at this time, though we do plan to show the end users how they can mine and stake. Should you be weary of projects like these? Absolutely! But this project has been developed after an epic failure that taught us a lot. Almost all good projects are the result of failure. This time it’s less about the mining, staking or tech community bias. This project is about community, local support and opportunity. We are not resting this project on the backs of miners, instead we are approaching this through the eyes of the end-user. While we appreciate your due diligence and tenacity to dig up past failures and we acknowledge them, that is not who or what defines this project. Mine solo for now using setgenerate true -1, you will find blocks. Until we can find a reliable pool that has understanding on how to set up a POW/POS coin, which presents it own set of problems. Also, make sure staking is enabled by using getstakingstatus, everything should be true, if anything is false you will need to determine why to get staking running. After exactly 24 hours since I turned on my wallet, staking is not enabled. There is also no stake reward in the explorer pool.enviromint. xyz/explorer/AGR 21:43:30 getstakingstatus { "validtime": true, "haveconnections": true, "walletunlocked": true, "mintablecoins": true, "enoughcoins": true, "mnsync": true, "staking status": false } We’ve been trying to figure out to help you get your wallet staking, so far we’ve come up short. We can’t replicate your issue. But, we would like to send you 9,000 AGR if you would be willing to set up your own masternode. This should get some AGR flowing into your wallet as we work to get you staking. Would this interest you? Dear, the mistake is not up to me. For the last two years I have been mining sometimes and mostly staking. This situation is happening to me for the first time. I am currently doing staking with a few coins, however I have not done Masternode so far. If my computer can be a node, I'll be happy to help. My computer is on non-stop, so we can try. If you send me detailed instructions for setting up a masternode (step by step) But, if I need to pay for a VPS for hosting masternode, then I really am not ready for that step at this moment .... It is really simple. If run windows or Ubuntu then you can run virtual box and host your own vps. Then use your own windows wallet to control it. We will send you the AGR and instructions. You shouldn’t have many issues. ok send me to try
|
|
|
So browsing through your github I see that this isn't your first coin... globalcurrency... enviromint?? I couldn't help but go on over to the old enviromint discord and see what all went down. It appears that that coin started off with a hidden virus thats steals wallet info. Followed by a mining pool that wouldn't issue any work to miners but mysteriously there was 1 ghost account that was able to mine no problem and no one knew who it was... Idk about you but that seems kinda familiar. For those that don't want to go dig up the old discord ill save you the time. It ended up with the "dev" dumping and abandoning the project without a single heads up to anyone
Thanks for the info. Very useful, especially for beginners! This is true, we did dump that project as it was flawed from the beginning. We launched without much experience using a coin that was built by WalletBuilders.com, and got in over our heads pretty quickly. We learned from our mistakes and have brought in people to help launch right this time. As we wear our black mark of shame for our first try, we can certainly move forward. Yes, we made a poor choice in launching on a pool that had some errors in setup and had rejected every block that was mined the first few hours, but some went on and mined solo from their own wallets. We wish we knew who the few wallets are that are receiving the majority of the coins, it’s certainly not us. Mining for us has little value beyond keeping the blockchain alive. And for fairness, we’ve shut staking down in our wallet as the premine would certainly have substantial weight on the network and not be a fair. We aren’t even mining at this time, though we do plan to show the end users how they can mine and stake. Should you be weary of projects like these? Absolutely! But this project has been developed after an epic failure that taught us a lot. Almost all good projects are the result of failure. This time it’s less about the mining, staking or tech community bias. This project is about community, local support and opportunity. We are not resting this project on the backs of miners, instead we are approaching this through the eyes of the end-user. While we appreciate your due diligence and tenacity to dig up past failures and we acknowledge them, that is not who or what defines this project. Mine solo for now using setgenerate true -1, you will find blocks. Until we can find a reliable pool that has understanding on how to set up a POW/POS coin, which presents it own set of problems. Also, make sure staking is enabled by using getstakingstatus, everything should be true, if anything is false you will need to determine why to get staking running. After exactly 24 hours since I turned on my wallet, staking is not enabled. There is also no stake reward in the explorer pool.enviromint. xyz/explorer/AGR 21:43:30 getstakingstatus { "validtime": true, "haveconnections": true, "walletunlocked": true, "mintablecoins": true, "enoughcoins": true, "mnsync": true, "staking status": false } We’ve been trying to figure out to help you get your wallet staking, so far we’ve come up short. We can’t replicate your issue. But, we would like to send you 9,000 AGR if you would be willing to set up your own masternode. This should get some AGR flowing into your wallet as we work to get you staking. Would this interest you? Dear, the mistake is not up to me. For the last two years I have been mining sometimes and mostly staking. This situation is happening to me for the first time. I am currently doing staking with a few coins, however I have not done Masternode so far. If my computer can be a node, I'll be happy to help. My computer is on non-stop, so we can try. If you send me detailed instructions for setting up a masternode (step by step) But, if I need to pay for a VPS for hosting masternode, then I really am not ready for that step at this moment ....
|
|
|
So browsing through your github I see that this isn't your first coin... globalcurrency... enviromint?? I couldn't help but go on over to the old enviromint discord and see what all went down. It appears that that coin started off with a hidden virus thats steals wallet info. Followed by a mining pool that wouldn't issue any work to miners but mysteriously there was 1 ghost account that was able to mine no problem and no one knew who it was... Idk about you but that seems kinda familiar. For those that don't want to go dig up the old discord ill save you the time. It ended up with the "dev" dumping and abandoning the project without a single heads up to anyone
Thanks for the info. Very useful, especially for beginners! This is true, we did dump that project as it was flawed from the beginning. We launched without much experience using a coin that was built by WalletBuilders.com, and got in over our heads pretty quickly. We learned from our mistakes and have brought in people to help launch right this time. As we wear our black mark of shame for our first try, we can certainly move forward. Yes, we made a poor choice in launching on a pool that had some errors in setup and had rejected every block that was mined the first few hours, but some went on and mined solo from their own wallets. We wish we knew who the few wallets are that are receiving the majority of the coins, it’s certainly not us. Mining for us has little value beyond keeping the blockchain alive. And for fairness, we’ve shut staking down in our wallet as the premine would certainly have substantial weight on the network and not be a fair. We aren’t even mining at this time, though we do plan to show the end users how they can mine and stake. Should you be weary of projects like these? Absolutely! But this project has been developed after an epic failure that taught us a lot. Almost all good projects are the result of failure. This time it’s less about the mining, staking or tech community bias. This project is about community, local support and opportunity. We are not resting this project on the backs of miners, instead we are approaching this through the eyes of the end-user. While we appreciate your due diligence and tenacity to dig up past failures and we acknowledge them, that is not who or what defines this project. Mine solo for now using setgenerate true -1, you will find blocks. Until we can find a reliable pool that has understanding on how to set up a POW/POS coin, which presents it own set of problems. Also, make sure staking is enabled by using getstakingstatus, everything should be true, if anything is false you will need to determine why to get staking running. After exactly 24 hours since I turned on my wallet, staking is not enabled. There is also no stake reward in the explorer pool.enviromint. xyz/explorer/AGR 21:43:30 getstakingstatus { "validtime": true, "haveconnections": true, "walletunlocked": true, "mintablecoins": true, "enoughcoins": true, "mnsync": true, "staking status": false }
|
|
|
So browsing through your github I see that this isn't your first coin... globalcurrency... enviromint?? I couldn't help but go on over to the old enviromint discord and see what all went down. It appears that that coin started off with a hidden virus thats steals wallet info. Followed by a mining pool that wouldn't issue any work to miners but mysteriously there was 1 ghost account that was able to mine no problem and no one knew who it was... Idk about you but that seems kinda familiar. For those that don't want to go dig up the old discord ill save you the time. It ended up with the "dev" dumping and abandoning the project without a single heads up to anyone
Thanks for the info. Very useful, especially for beginners!
|
|
|
Can u please share wallets?
1. github. com /pacificao/agrarian/raw/main/agrarian-daemon-windows.zip 2. github. com /pacificao/agrarian/raw/main/agrarian-qt-windows.zip
|
|
|
@Djurica, @ahousefavor, @MineDumpNextOne.
I want to apologize to each of you. I checked with the owner of the pool, since they added Agrarian to the pool they’ve been getting rejected blocks due to a misconfigured setup. As compensation, may we send each of you 1000 AGR to hopefully cover what you would have mined, plus a little more?
Thanks a lot. I hope it will be enough to launch a wallet for staking AQ8BpSJmUz5qz1uMzijsGTgyRy25xinYfm We appreciate your understanding. 1,000 AGR has been sent to your address above. Please let us know if you continue having issues. For now, we’ve encouraged the pool to remove us from their server until they can fix the issue. Thank You again. Here is the report. Exactly 7 hours ago, you sent me 1000 RG. For the first three hours, the wallet was open without encryption, but the staking didn't start. After that, I encrypted the wallet. Now, last 4 hours wallet is encrypted and currently unlocked for anonymization and staking only but staking not active even after 4 hours. In any case, one day was lost in the attempts.... { "validtime": true, "haveconnections": true, "walletunlocked": true, "mintablecoins": true, "enoughcoins": true, "mnsync": true, "staking status": false }
|
|
|
@Djurica, @ahousefavor, @MineDumpNextOne.
I want to apologize to each of you. I checked with the owner of the pool, since they added Agrarian to the pool they’ve been getting rejected blocks due to a misconfigured setup. As compensation, may we send each of you 1000 AGR to hopefully cover what you would have mined, plus a little more?
Thanks a lot. I hope it will be enough to launch a wallet for staking AQ8BpSJmUz5qz1uMzijsGTgyRy25xinYfm
|
|
|
I've been mining since the beginning this morning ... but I didn't get anything .... the coins don't go through the pool, they only go to one or two of the same addresses
|
|
|
Awesome concept of Project for everyone & everywhere. I just bought one quantity of 25k $AIDTOKENs
Thank You..
#fundraising #crowdfunding #aidbit #aidwallet #aidtoken
|
|
|
Nice opportunity for everyone. For project owners & ordinary people can earn by voting. Thanks
|
|
|
Working fine now. Thank You!
|
|
|
Cant connect although I set the following parameters in the config file
rpcuser=LGBTIQ_Serbia rpcpassword=PasswordofLGBTIQfromSerbia rpcbind=0.0.0.0 rpcallowip=127.0.0.1 listen=1 server=1 txindex=1 daemon=1 rpcport=42529 addnode=37.97.179.18 addnode=136.144.171.201
I try also to put on debug console command: addnode 136.144.171.201 add addnode 136.144.171.201 onetry
but without success
|
|
|
Dear,
How to mine with wallet?
|
|
|
It looks like a good project. Can I get an invitation?
Thank You
|
|
|
Dear,
Thank you for opportunity. #binanmoon, #airdrop, #moon, #moontoken #binanmoonprotocol
|
|
|
That is really strange. What type of miner do you use?
Do you have some special instruction for mining.... maybe some new quide... after 7 years in mining.... this is totally strange.
|
|
|
I mined in wallet.
Sorry to bother you.
Now I have installed a totally new wallet again and started mining from block 70. I lost all day for nothing. Thanks anyway. I wish you luck in your further work.
|
|
|
|