Latest posts of: sreetglide2011

Show Posts
Pages: [1]

on: December 17, 2020, 05:45:47 AM

Quote from: flyboynyc on December 17, 2020, 05:33:32 AM IS this thread for GPU/CPU miners using their computers? This is for people using Phoenix miner and their GPU for mining. No CPU mining involved

on: December 16, 2020, 08:40:10 PM

Quote from: MAX-M4 on December 16, 2020, 08:00:19 PM Dear respected sir please help me i'm using "PhoenixMiner" 5.3 and my command line is "C:\Users\LUCKY\Desktop\PhoenixMiner_5.3b\"PhoenixMiner.exe -epool eth-asia1.nanopool.org:9999 -ewal 0xfe4e00aa52657cc970c262337135fa67b5732639.LUCKY-1/aiken.banks@gmail.com -epsw x -rxboost 1 then open .bat right click run as administrator working fine rxboost apply successfully but i'm pasting .bat shortcut in windows system startup folder for auto start miner in power loss situation or restart system then power loss again system start miner start but -rxboost not applied PhoenixMiner showin this error (please run PhoenixMiner.exe as administrator) so i request you to please guide me sorry my english is not good Thanks "PhoenixMiner.exe" is the file that needs to be set to run as administrator

on: December 09, 2020, 03:35:59 PM

Quote from: squall50000 on December 09, 2020, 02:04:13 PM Hello gentlemen, I have a strange problem only with one rig. I'm using 5.3b and it runs only up to the point where I get the NO CUDA driver found than just stops. Tried running in most basic settings but nothing seems to work. Has anyone come across this? Meanwhile claymore 15 with exactly the same settings runs just fine. Rig is running with 8x sapphire 570 8GB nitro+, 110GB virtual memory, 4gb ram, i5-7400. Last setting: PhoenixMiner.exe -pool XXXX -ewal XXXX -eworker XXXX -epsw XXXX -ftime 10 -cclock 1200,1200,1200,1200,1200,1200,1200,1200 -mclock 2150,2150,2150,2150,2150,2150,2150,2150 -cvddc 900,900,900,900,900,900,900,900 -mvddc 900,900,900,900,900,900,900,900 -tt 60 -fanmin 50 -fanmax 95 pause Please help! EDIT sorry I just read the above messages I'm having the same problem like the previous post! I started having the same problem 2-3 nights ago. I updated the drivers and it fixed the problem

on: November 29, 2020, 06:27:27 PM

Quote from: Biterion on November 28, 2020, 09:53:02 PM Quote from: Biterion on November 28, 2020, 03:30:17 PM Quote from: cscheat on November 28, 2020, 03:10:09 PM Windows 10 please.... also could be bad gpu or risers ok,.. i'll try to update to win10 after 6 more hours make update to win10.. (i can't sleep.. here 4:54AM now) used AMD Driver 12.4.2 >>> i can see my GPU all work in device manager patch by 'atikmdag-patcher-1.4.7' switch to compute mode by 'AMD-Compute-Switcher' but,... using Phoenix miner 5.2e and 5.3b still same, hashrate still not change like before.. here is the result: any suggestion to make RX480 back to 30Mhs..? thanks The driver you are trying to use is wayyyyyyy soooooo old. Try 20.4.2

on: November 28, 2020, 01:28:36 AM

Quote from: milospinkfloyd on November 24, 2020, 08:05:21 PM @zeef can you explain how to run always bat file with admin righs? if I run it manually (right click than "run as admin") with admin rights than rxboost is aplayed but if it runs from startup folder that it isnt with admin rights win10 You set Phoenixminer.exe to run as admin, then when the bat file goes to run the exe, it runs as admin

on: November 19, 2020, 10:13:46 PM

Quote from: syahpian on November 19, 2020, 11:20:46 AM my rx 580 8GB didn't get pass 30MH/s not sure why, only can get around 29.8Mhz command i use -amd -rxboost 30 -clKernel 1 -prate 0.12 -cvddc 825 -mvddc 850 same result with memory overclock to 2250Mhz using latest pm miner with 20.11.1 driver What is you clock speed on your gpu core?

on: November 14, 2020, 05:47:05 PM

Quote from: volig on November 14, 2020, 04:58:31 PM Quote from: batsonxl on November 14, 2020, 06:45:42 AM Quote from: volig on November 14, 2020, 06:25:44 AM Hello. There is a problem: There are several rigs composition; win10, cards RX 580 8Gb, mother Asrock 81, driver 20.9.1 If after rebooting immediately turn on Phoenix v5.2c then the speed from the card is 30mh/s, and if you first run the nanominer v1.12.0 and then Phoenix, the speed on fenex rises more than 32mh/s and keeps stable. If the rig is reloaded, it will be 30mh/s again. To get 32mh/s, the operation with the launch of the nano miner must be repeated and then again it will be 32mh/s. Currently, no additional parameters are registered. If you pre-launch the nano miner only on one map, then the speed will increase only on one map. If you put strap 1 on the map where the speed is already 32mh/s, then the speed drops to 30 mh/s. What could be the problem? Which parameter should I add or change? This pattern always works on different rigs. yes im having that problem too. it looks like 5.2a 5.2b 5.2c has that problem, also developer do not recommend 20.9.1 driver I haven't tried all the other drivers. The 20.9.1 driver is recommended for Phoenix version 5.2 . The first page says that we recommend drivers from 19.12.2 to 20.11.1 (inclusive). Maybe someone checked on which drivers there is no such problem? 19.12.2 to 20.8.1 (inclusive).

on: November 11, 2020, 05:06:50 AM

Quote from: hugomenezes on November 10, 2020, 06:17:04 PM I had a issue with PhoenixMiner 5.1c My Rig is: CPU: G3930 RAM:; 16GB DDR4 HDD SSD240GB GPU: 7x RX570 4GB POOL: Coinotron IMPORTANT! All owners of AMD cards with 4 GB RAM must upgrade to PhoenixMiner 5.2b or later version to continue mining after DAG epoch 373 (set -daglim 1, or see bellow how to use the -daglim option; you also need to add -dagrestart 1 to allow maxium possible value of -daglim). Additionally, here are some important tips for longest possible usage of 4 GB AMD cards with PhoenixMiner 5.2a and later: Issue: yesterday my rig making 175Mhash now today cannot start the miner, still 0mhash and says thread not responding. Im use drivers AMD 27.20.12029.1000. Regards!

on: November 10, 2020, 05:23:26 PM

Quote from: Littlegrand on November 10, 2020, 04:33:46 PM Quote from: sreetglide2011 on November 10, 2020, 04:00:19 PM Can someone help me imply the "-daglim 1 -dagrestart 1" to just my gpu12. I only have one 4gb card in my system and I dont want to limit the rest. Is it even possible to do so? start 2 pheonixminers one with the 8gb and one with just the 4gb I was hoping there was a way to do in in a single instance or PM

on: November 10, 2020, 04:00:19 PM

Can someone help me imply the "-daglim 1 -dagrestart 1" to just my gpu12. I only have one 4gb card in my system and I dont want to limit the rest. Is it even possible to do so?

Pages: [1]