Show Posts
|
Pages: [1] 2 »
|
Received my Knives today, much faster then i expected for international shipping, knives are in great condition and are very sharp.
Thank you very much !
|
|
|
its a shame you dont do international shipping
|
|
|
I'm running 2 Cards, on Windows 7 Ultimate 64bit and have a Silverstone Strider 1500w PSU
Do you use stock coolers? In auto mode or on 100% rpm? I can't get, how do you keep temp at 68C. My cards are separated with pci-e risers and heat up to 75-80C. What software do you use for OC, MSI AfteBurner? My 5850s are the sapphire xtreme ones, stock coolers running at 65-70% fan depending on the days temp, running at 100% will kill its life time I'm using sapphire trixx for the OC, not sure why you are getting such high temps, maybe your OC software is automatically bumping the voltage.
|
|
|
I'm getting 406mhash/s with my sapphire xtreme 5850 @ 975/300 no voltage change, operates around 68 degrees C
Do you have 1 card only? I have 6 sapphire xtreme 5850 and the best card works stable @ 875/300 (the worst works @ 800/300), how did you made it work @ 975MHz ? What OS do you use (Linux/Windows 32/64bits)? What PSU do you use? I'm running 2 Cards, on Windows 7 Ultimate 64bit and have a Silverstone Strider 1500w PSU
|
|
|
my 5830's running at 343mhash/s clocked at 1060/370 stable and temps don't go higher then 56ish
|
|
|
I'm getting 406mhash/s with my sapphire xtreme 5850 @ 975/300 no voltage change, operates around 68 degrees C
|
|
|
are those core speeds you guys have, are they the upper limit to the 5830 ?
also great help so far, thank you
|
|
|
I'm new to mining and I'm wondering what the best settings for a 5830 are.
I'm currently testing one 5830 @ clocks 975/300 with phoenix miner with phatk kernel with 3% mod
with the following arguments VECTORS BFI_INT AGGRESSION=7
Running windows 7 x64, 11.6 drivers, 2.1 sdk, i can only get an average of 270/280 Mhash/sec.
What are the best settings and options that will maximize my performance ?
|
|
|
would a strider 1500w be overkill for say 6x 5830s ??
|
|
|
I have a Gigabyte GA-990FXA-UD5 Motherboard and when fully populated it has 3 PCI Express 8x slots, 2 x4 slots and 1 x1 slot.
I was wondering if i would be able to fully populate this board with 6 cards with extenders ?
I have a Strider 1500w powering it, I'm just not sure if the motherboard will handle it.
|
|
|
I'm looking to build a new triple 6990 rig and I'm wondering if anyone can help me with a choice of power supplies.
I know that a lot of you in the community use the AX1200 which here in Australia is more expensive then the Strider 1500W.
So I'm not sure which one to choose; the AX has a single +12v rail where as the Strider has 8 +12V rails but has a higher wattage.
|
|
|
I'm looking into getting a new mining rig with 2x 6990s, i will be running them in windows 7, so what i would like to know is, does running them in crossfire cause any performance loss compared to just using a dummy plug ? and also will this dummy plug setup work http://blog.zorinaq.com/?e=11 ? Thanks
|
|
|
see this is where i get a little confused. When you/we say that at 5ghash/s would discover ever 14 days is that one machine at 5ghashes or say 3x 1.7ghash rigs. To lower the discovery time does one need to cluster rigs ? or is it just having that performance under your belt that increased your chances ?
Are multiple computers supposed to be linked together so they can crunch through the work altogether ?
|
|
|
at what hash rate would solo mining become effective ?
|
|
|
I've tried 2 calculators and they say it will take approx 40days to solve a block solo, that means every 40 days 50 BTC ? would that be more efficient than pooled mining ?
I think it basically equates to be around the same amount of BTC per 40 days
What do you guys think ?
|
|
|
What are the chances of hitting that amount of blocks ? or would it just be trial and error and then move to a pool ?
|
|
|
arrghhhh......... I'm so confused now..... The 5830s are really in the sweet spot, but the 6990s can be consolidated in one computer. I can setup 3 quad 5830 rigs for around $3000 AUD giving i presume around 3000mhashes ? but for around the same price i can get a single rig with 3 6990s which will not get anywhere near 3000mhashes
What are you thoughts go with 3x quad 5830 rigs ?
or
What are the chances of me detecting a block in a month with a triple 6990 rig ? or would 3x quad 5830 rigs be better ?
Does more consolidated power mean better chance ?
|
|
|
|