Bitcoin Forum
September 27, 2021, 08:34:58 PM *
News: Latest Bitcoin Core release: 22.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1] 2 3 4 5 6 7 8 9 10 »
1  Economy / Services / Re: Gigamining / Teramining on: April 23, 2014, 02:55:27 PM
Rest of the miners showed up today (well, yesterday now....) and we put up another 100Th/s with another 40Th/s to go tomorrow.

Sounds good!
2  Economy / Securities / Re: ASICMINER: Entering the Future of ASIC Mining by Inventing It on: January 24, 2014, 06:17:12 AM
....
Slow hardware=less heat

Powerful hardware=more heat

....

I would say that my old gfx card (about 700 Mhash) that is a slow hardware generates more heat than a 5Ghash BFL ASIC. So

Slow hardware = more heat

Efficient hardware = less heat
3  Economy / Securities / Re: [BitFunder] Asset Exchange Marketplace + Rewritable Options Trading on: November 08, 2013, 07:33:09 AM
I can login to bitfunder just fine. I just asked several others who could as well.
US users are blocked from trading on BitFunder and BitFunder will continue to try it's best to make sure US users can not trade on BitFunder.
WeExchange verification requests are still being looked at if and when there is time not being spent towards other important problems such as getting users their bitcoins.
This is a very serious problem that needs to be addressed and resolved fully as soon as possible.

Thank you for your understanding in this.


I hope the problems are addressed soon!
4  Economy / Services / Re: Gigamining / Teramining on: October 22, 2013, 06:57:21 AM
Interest payments down by over 50% in just the last 3 week Undecided

That is correct. the average difficulty for September was 104,550,780 while this months average difficulty is going to be over 216,654,943 which is OVER a 100% increase.

Seems that money printing devices have seen somewhere around $100m in investment come in the form of 100% pre-orders and that investment has made the difficulty jump 30% more or less each diff period.

These are the risks along with manufacturer delay and BTC price.

And the BTC price has gone up with over 30% the last week, so It's not so big loss if we get 50% less BTC from Giga-/Teramining.
The BTC price will go up even more.
5  Bitcoin / Pools / Re: [65000 GH/s] Slush's Pool (mining.bitcoin.cz); TX FEES + UserDiff; ASIC tested on: September 18, 2013, 11:48:48 AM
I'm getting •This is not a valid Bitcoin address. Please install Bitcoin client or register some web wallet to get one. message. I didn't change anything and double checked the address as well. Also tried changing the address but it won't take it either.

anyone else having issues today?

same problem for me =(
6  Economy / Marketplace / Re: ["WAIT LIST"] BFL SC Pre-Order Information on: September 05, 2013, 08:53:37 PM
Quote
09/25/2012    9252    N    0    2    0    0    -    burger

My was delivered 3 september 2013
7  Economy / Marketplace / Re: ["WAIT LIST"] BFL SC Pre-Order Information on: June 23, 2013, 03:36:04 AM
I upgraded my order from Jala to Little Single

09/25/2012    9252    N    2    0    0    0    -    burger
to
09/25/2012    9252    N    0    2    0    0    -    burger
8  Economy / Services / Re: Gigamining / Teramining on: June 09, 2013, 07:58:14 AM
Is the "free" upgrade to Teramining automatical? Or do I have to do anything? If so, I don't find anything in the settings? Huh

Indeed, how do I go about upgrading?

You have to pick your upgrade path, it is not automagical!

Log into your account at https://virtualprocessingsolutions.com and pick the upgrade path you want.

Upgrades have been disabled until more equipment arrives. I will email Gigaminers when it is open again.

Best,
James

Thanx for the info, I was just thinking of asking the same.
9  Economy / Services / Re: Gigamining / Teramining on: June 06, 2013, 09:55:11 AM
TERAMINING upgrades are 0.25BTC for 135mh/s, chips that produce twice this hashrate are selling for 1/5th of this price. I know they aren't assembled and ready to start hashing, but this price is too much. After all the reasons for doing things by the law, this is one thing that isn't law and giga can redeem himself with by giving something back to the investors who have put so much in

If I calculated correctly then one BFL 5 GH/s bitcoin miner will cost about 0.062 BTC for 135MH/s. Thats 4 times better price for the BFL miner than the Teramining upgrade.
10  Economy / Securities / Re: [Investment fund] Gamma Bitcoin Fund [Closing] on: May 28, 2013, 08:29:40 AM
Good job with the GBF!!!!
11  Bitcoin / Project Development / Re: [ANNOUNCE] Bitcoin Calculator app for Windows 8 on: April 30, 2013, 06:54:32 PM
Version 0.2.1.0 is on the Windows Store now!
12  Economy / Securities / Re: [Investment fund] Gamma Bitcoin Fund [Closing] on: March 03, 2013, 08:40:37 PM
To answer everyone's questions.
I would not take all the profit if we end up getting back more then 100% (I highly doubt it).
I would take the 5% originally agreed to.
I am not looking to hold ASICMINER for a longer period of time, I am looking to sell them once I think the time is right.
What are you guys attitude towards selling the shares?
Would you like to see a sale, if so how many of the shares and at what price?
As for the GIGAMINING claim, I have talked to James and I am looking to submit the claim sometime next week.
//DeaDTerra


Don't sell the ASICMINER shares until you got back 100%. or at least sell when you will get back 100% (with the dividend included)
13  Bitcoin / Bitcoin Discussion / Re: Bitcoin-Qt / bitcoind version 0.8.0 released on: February 23, 2013, 12:05:58 AM
I am using Windows XP SP3.

H:\Bitcoin>dir
 Volume in drive Q is BITCOIN
 Volume Serial Number is XXXX-XXXX

 Directory of Q:\Bitcoin

2013-02-21  09:31 AM    <DIR>          .
2013-02-21  09:31 AM    <DIR>          ..
2012-09-18  10:19 AM                 0 .lock
2012-09-18  13:57 PM         3,850,240 addr.dat
2012-09-27  12:05 PM           131,072 backup.dat
2012-09-18  13:25 PM     2,097,384,811 blk0001.dat
2013-01-04  10:34 AM     2,097,346,788 blk0002.dat
2013-02-20  22:13 PM     1,561,011,203 blk0003.dat
2013-02-20  22:18 PM     1,809,104,896 blkindex.dat

2013-02-20  22:28 PM    <DIR>          blocks
2013-02-21  09:22 AM    <DIR>          chainstate
2013-02-20  22:18 PM    <DIR>          database
2012-09-24  08:41 AM                 0 db.log
2013-02-21  08:31 AM           564,356 debug.log
2013-02-21  09:31 AM           956,384 peers.dat
2013-02-21  09:18 AM           172,032 wallet.dat

What can I safely delete? I highlighted in bold and color what I think can be deleted. Can someone confirm this?

You can safely delete those that you highlighted. As the new files is in the "blocks" directory.

Easiest way for you to check is to close the bitcoin client, move those files to another directory and then start the client again and check if it starts downloading the blockchain again.
14  Bitcoin / Mining software (miners) / Re: BFGMiner: modular FPGA/GPU, clk/fans, GBT, RPC, Linux/OpenWrt/PPA/Win64 2.10.4 on: February 17, 2013, 09:00:27 PM
Way cool - best release yet.  Got a significant improvement in my modminers hash rate and fewer errors - i run under win7 x64 and it seems to be a bit more responsive in general!

Fantastic job!
Just for some statistics gathering, are you running the new Win64 version, or the Win32?



Win64 version!

any more benefits from the 64-bit version compared with the 32-bit?
15  Economy / Securities / Re: [Investment fund] Gamma Bitcoin Fund [Closing] on: February 11, 2013, 09:16:15 PM
I have processed all payments,
If you haven't received yours please send me a message and I will investigate further.
//DeaDTerra

I got the BTC, Thanx!
Keep up the good work!

And I hope you get the gigamining claimed soon, I got my quickly as I sent all the signed papers (photographed with my phone) in an e-mail to the lawyer.
16  Bitcoin / Project Development / Re: [ANNOUNCE] Bitcoin Calculator app for Windows 8 on: January 31, 2013, 12:53:21 PM
Version 0.2.0.0 is on the Windows Store now!
17  Economy / Services / Re: Gigamining / Teramining on: January 30, 2013, 01:52:10 PM
Is there a way I can find out what Bitcoin address I used to register the claim?

If you remember how many assets you had? And have the addressbook with the adress (among the other not named) in then you can find out.
18  Economy / Services / Re: Gigamining / Teramining on: January 29, 2013, 06:17:59 AM
I finally got my claims! Thanx Gigavps.
19  Economy / Services / Re: Gigamining / Teramining on: January 25, 2013, 10:04:37 PM
I wrote another email to Quentin on January 21st. Guess what, he just ignores me. I am not even sure if this guy exists. But I know that I gave you BCs to finance your operation and you hardly refuse to fulfill your part of the contract by simply forwarding me to your not responding so called lawyer!
This is criminal and nothing else. You have my adress and my email in the list you got from GLBSE. Pay my outstanding payments!

Hi bixcoin,

If you feel that Quentin is ignoring you, then please email me directly and I will contact him today to make sure he gets you an answer.

james at gigamining dot com

I have not refused to pay anyone who has taken the time to follow the claims process. Payments are again being made on Monday's to those who have done so. I have/am fulfilling my obligations while making sure Gigamining is around to continue to do so.

Best,
James

I hope my claim gets in time for Monday then =)
20  Economy / Securities / Re: ASICMINER: Entering the Future of ASIC Mining by Inventing It on: January 24, 2013, 02:41:37 PM
Update

All confirmations including GLBSE-only ones (who haven't claimed to us) have been sent. For shareholders who haven't received any, please check your spam folder, and report to us if you still couldn't find them.

Well, now that Avalon apparently shipped, would you like to give an estimate on when we start hashing and how many TH/s are we looking at?
Considering the yield rate (including chips themselves, assembling, and other uncertainties) and the overclocking opportunity we are looking at over 10TH/s and under 12TH/s for the whole first batch and sixfold for the second.

Quote from: bitcoinmagazine
Normally, computer chip manufacturing facilities produce a “yield” of 95% – that is, less than 5% of the chips that come out of the foundry are imperfect in some way. For ASICMiner’s chip production, the company’s customer service representative reported, the number of failed chips is as high as 30%. In theory, all this means is that the manufacturer will need to make 43% more chips to compensate, but the abnormality hints at the possibility of other problems to come.
We have to make clear that that we have said was that our fab considers <1/3 failed rate as OK and they won't take responsibility, which is their bottom line. The reality is that our yield rate also >95%. The whole number of chips were less than what we expected was caused by the MLM typed process used for making our masks utilizes less area than a full mask.

I'm beginning to be really curious as to what the hold up is. Proper way to do this is to plan ahead, and plan for errors also.

Has something come up?
Why was hardware ordered after chips and boards arrived?
Haven't any mechanical CAD or thermal analysis been done?

Hope your update is open and detailed. There's no need to keep any secrets at this point.
1. No surprising things has come up. The real hold up is that we are meeting the delay of the assembly service which is an automated process which is practically hard to "push".
2. Because we have made many adjustments on the heat solution during the last few weeks and negated many as improper ones for bulk-ordering. They are done in parallel with the first the (mass) packaging of chips and then the (mass) production of pcbs so this was not the part that wasted time.
3. Yes. But we ordered them after the physical tests are done.

Framing is important, so let me ask it like this:
Freidcat, would you please post an brief note on what the current status of the project is and when the next milestone worth announcing will happen? Thanks!
The current status is that in estimation we will be delayed by about 2 weeks in total compared to what we projected when the chips arrive. That is early Feb, before the CNY vacation comes. The next "real" milestone worth announcing is that we start hashing in our workshop, but before that we will also keep you updated.

It was a perfect moment to start, but it seems there are no mining rigs ready yet.... Guess we have to wait till Friedcats update in a couple of hours to hear where they stand at the moment.....
No, not ready yet. Whenever they are ready we couldn't wait till a "regular" update time to announce it...

We are sorry to shareholders that we are now >2-month delayed against the original plan. (Late Dec. against Late Oct. to get the chips, plus 4-5 weeks against 2-3 weeks to fully deploy). The status are resulted in by a mix of our optimistic projection, our conservative action and our un-developed relation in the electric manufacturing field. Thanks again for all shareholders' patience and we will keep the track of deploying, and improve our timeline with the lessons of this time in our later products.

Thanx for the nice update. Keep up with the good work!
Pages: [1] 2 3 4 5 6 7 8 9 10 »
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!