 Show Posts
|
|
Pages: [1]
|
|
Hey gents, I was wondering which online store is best to land 3090s? I've been refreshing the bestbuy website in the mornings for the last couple of weeks but nothing. The best I could do was have it on my cart but I wasnt able to proceed to check out fast enough lol. Thank you.
|
|
|
|
Thank you. I managed to sell one for $550 over the weekend. Gamers tend to pay way more then here lol. I'll try $599 see what happens with my other ones. |
|
|
|
|
Anybody got any idea how much I can get for a couple of nvidia MSI 1070 Aero? These cards are giving me the lowest mh/s and thought might as well try to sell them asap and get the newest gpus. I checked ebay and the few selling are about 450-500 bucks and most from japan. I never pushed them too hard and all are taken care for, but they're out of warranty. Thanks.
|
|
|
|
|
I had a similar issue with my rig. The first thing I'd recommend is don't do anything crazy like reinstalling windows. The solution is usually the simplest. In my case I solved it by:
1. If you're using two PSU, make sure your gpus share the same psu, don't mix them (pus powering a riser different than the gpu's psu).
2. The gpu that was giving me problems to yours, I connected it by itself on the first pcie slot and installed the drivers. Then I connected the other gpu on the second pcie and installed the drivers. After that, I plugged the rest and windows recognized all.
3. Try one gpu at a time, then keep adding. I'd start with the problematic one.
Make sure to get the DDU app to completelly uninstall nvidia drivers if everything fails, and try again.
|
|
|
|
|
The best I could get for my 1070s was 26 MH/s at 70 TDP, Core 100, and Memory 600 which keeps them below 70C; if i increase memory up to 620 the rig is unstable. One with double fan goes up to 29 MH/s.
|
|
|
|
|
One of my gpus had a leakage I didn't know what it was, but suspected it was from the thermal compound. I had it running at < 60C at 65 TDP. It started to give me problems and eventually windows wouldn't detect it. I then sent it to the manufacturer and got a replacement. From experience, said leakage will lead to bad news. If your card is still under warranty I'd use it and RMA it, if not replace the thermal pads.
|
|
|
|
|
Hello, I've been using PM for my 1070s and for every epoch I think it decreases more and more when mining ethereum. Right now they've dropped to 25 MH/s from 30 MH/s. Will lolMiner improve the hashrate or does the zombi mode work only for 4gb? Thanks.
|
|
|
|
Question, my mini rig has been mining without any problems, but this week I've gotten two blue Windows screen error saying something like: Windows 10 encountered an error, it's trying to fix the problem and will restart shortly  Anybody has seen this, and what could possibly be the problem? I checked PM log but there's no error shown in the log. Thanks. Win 10 4x 1070 Current drivers Latest PM |
|
|
|
|
I recently got my hands on a cheap mining rig, and it's been mining eth without any problems. So my question for the pros is, what are your strategies for this bull run when it comes to holding vs selling? I'm a day trader, so the motto is to take the money and run. I was thinking of doing the reverse DCA, meaning sell off as soon as I can. Thoughts?
|
|
|
|
Don't mean to hijack your thread OP, but it's a similar question. Is it safe to power up to risers with one of these? Power limit is 300W, and my 10xx pull <120W. Thank you.  |
|
|
|
Hello, I turned on my mining rig a few weeks ago (all 1070s) and have an issue after one of my risers died on me. I decided to plug the gpu into the 16x slot of the motherboard. It was working fine for a few days until today. I checked every single riser, cable, gpu, and they all work. But as soon as I plug a gpu into the motherboard it's not recognized (windows says it could't load the drivers and theres a yellow "?"). tl;dr: - one of my risers died, so i moved the gpu to the motherboard, it worked for a few days but not any more
- the gpu on the mobo works and it mines by itself
- As soon as I plug a gpu with riser the gpu plugged on the motherboard stops working
Anybody with more experience can help out? Thank you. After countless restarts, uninstalls, unplugs, etc. etc. it was the new Nvidia driver. Just a heads up. |
|
|
|
Hello, I turned on my mining rig a few weeks ago (all 1070s) and have an issue after one of my risers died on me. I decided to plug the gpu into the 16x slot of the motherboard. It was working fine for a few days until today. I checked every single riser, cable, gpu, and they all work. But as soon as I plug a gpu into the motherboard it's not recognized (windows says it could't load the drivers and theres a yellow "?"). tl;dr: - one of my risers died, so i moved the gpu to the motherboard, it worked for a few days but not any more
- the gpu on the mobo works and it mines by itself
- As soon as I plug a gpu with riser the gpu plugged on the motherboard stops working
Anybody with more experience can help out? Thank you. |
|
|
|
|
