Latest posts of: CDCoinminer

Show Posts
Pages: [1]

on: June 02, 2017, 04:52:21 PM

Quote from: jackbox on June 02, 2017, 04:45:15 PM Quote from: CDCoinminer on June 02, 2017, 04:42:28 PM What is the latest version of Radeon drivers that can be used for mining? The latest versions. 17.X.X. Just patch with Pixel Patcher. I can install the 17.x.x crimson drivers from AMD and then just run pixel patcher?

on: June 02, 2017, 04:42:28 PM

What is the latest version of Radeon drivers that can be used for mining?

on: June 20, 2014, 02:50:18 PM

Quote from: willoneal on June 17, 2014, 08:17:42 PM Screenshots would be awesome. I had the WAN ports set up, and the miner could talk outside the network just fine. But mining would never start. So I read some forums somewhere and they said the use the LAN port. Now the LAN ports work the way they are supposed to, but still, no mining. I'm not proud to say this, but I've been struggling at getting mining started for over 2 weeks, and I can't get anything to happen. Isn't the LAN port only for the two ASIC boards to communicate with each other?

on: June 12, 2014, 01:45:19 PM

Quote from: allcoinminer on June 11, 2014, 06:20:38 AM Quote from: CDCoinminer on June 10, 2014, 04:50:04 PM Quote from: allcoinminer on June 10, 2014, 04:38:14 PM Quote from: CDCoinminer on June 10, 2014, 04:25:49 PM Quote from: BCwinning on June 10, 2014, 03:39:39 PM Quote from: CDCoinminer on June 10, 2014, 03:18:59 PM The formula for HW % is HW/(diffA+diffR+HW)100 correct? I assume it looks more like HW/((diffA+diffR+HW)100) given that multiplication comes before division. never wrote it down I just use a website. http://www.coincadence.com/antminer-s1-hardware-error/ Formula: Error % = HW / ( HW + DiffA + DiffR) * 100 Thanks. That's a great tool. This is rather disheartening however. Any attempt at overclocking results in at least 14% HW errors. Which is your PSU? CoolerMaster GXII 750W Try a firmware update to the latest even if you are in the latest. The try again and report. DO you have an energy meter to check the power consumption? I had the latest firmware but I downloaded and flashed it anyway. After flashing the firmware and OCing using the 'chip_freq' 4f81 and 'timeout' 35, this is what I get

on: June 10, 2014, 04:50:04 PM

Quote from: allcoinminer on June 10, 2014, 04:38:14 PM Quote from: CDCoinminer on June 10, 2014, 04:25:49 PM Quote from: BCwinning on June 10, 2014, 03:39:39 PM Quote from: CDCoinminer on June 10, 2014, 03:18:59 PM The formula for HW % is HW/(diffA+diffR+HW)100 correct? I assume it looks more like HW/((diffA+diffR+HW)100) given that multiplication comes before division. never wrote it down I just use a website. http://www.coincadence.com/antminer-s1-hardware-error/ Formula: Error % = HW / ( HW + DiffA + DiffR) * 100 Thanks. That's a great tool. This is rather disheartening however. Any attempt at overclocking results in at least 14% HW errors. Which is your PSU? CoolerMaster GXII 750W

on: June 10, 2014, 04:25:49 PM

Quote from: BCwinning on June 10, 2014, 03:39:39 PM Quote from: CDCoinminer on June 10, 2014, 03:18:59 PM The formula for HW % is HW/(diffA+diffR+HW)100 correct? I assume it looks more like HW/((diffA+diffR+HW)100) given that multiplication comes before division. never wrote it down I just use a website. http://www.coincadence.com/antminer-s1-hardware-error/ Formula: Error % = HW / ( HW + DiffA + DiffR) * 100 Thanks. That's a great tool. This is rather disheartening however. Any attempt at overclocking results in at least 14% HW errors.

on: June 10, 2014, 03:18:59 PM

The formula for HW % is HW/(diffA+diffR+HW)100 correct? I assume it looks more like HW/((diffA+diffR+HW)100) given that multiplication comes before division.

on: June 10, 2014, 01:49:21 PM

I'm getting 4% HW errors using the 387.5 freq settings and only getting 189.7 Gh/s. I tried both 400 settings (0780/35 and 4f81/36) and I was getting 15% HW errors. My temperatures are always below 50. Is 4% HW error acceptable or is overclocking not really viable for my unit?

on: May 09, 2014, 10:11:10 PM

Well I got the two Gridseed 5-chip units I ordered. They shipped pretty quickly. GAWminers was nice enough to give me store credit when the price dropped $20 the day after I ordered them. I would have preferred to have know at the time of purchase the units had already been actively mining and I would be getting a couple plucked from GAWminer's farm. There is no mention of that on the product page.

Pages: [1]