961
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: RX 470 are even cheaper now
|
on: November 14, 2016, 04:45:46 AM
|
If only ZEC price stopped going down so much. It is making all those speed advances largely irrelevant. Whoever shorted ZEC is making a lot of dough so far.
I keep saying that i hate to see all the hard work every one is putting it into zcash only to see it die. then what > back to ETH .
|
|
|
963
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: RX 470 are even cheaper now
|
on: November 14, 2016, 03:20:27 AM
|
do newegg ship to UK?
you can try but i don't think so you may have to use there uk site if they have one. Here's there uk site so i would say no :"( ... http://www.newegg.com/global/ukThe prices look close to the US price, i think, i don't know how much £142 is to you all, I mean is that a lot there ? in the Us it's 178 $, so not to bad . i don't have a 470 rig, but you can do 120 sol by using optiminer or whatver is called, it's another miner more optimized, check the thread on the zcash forum cm 5 is doing close to that now ZEC: GPU0 112.822 H/s, GPU1 119.066 H/s, GPU2 111.511 H/s some one made post that explains we have all most maxed out the 470 with 8gb cards which might reach 146 sol 4gb half that ? .
|
|
|
964
|
Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs
|
on: November 14, 2016, 01:56:48 AM
|
As I recall, all of the fabs for the 14/16nm node at this point are either TSMC in Taiwan, or Global Founderies in New York State (ex-IBM fabs) or Taiwan.
I am NOT sure where Intel is doing foundry work though, and I might have missed a couple somewhere or some may have come online I don't know about since the last time I checked.
cool there is one in the us i thought there was only 2 both were in china ... or around that part of the world i don't know i never looked only looked how chips are made didn't notice who made them.
|
|
|
966
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Innosilicon A4 Dominator Mining ---- anybody else have any of these?
|
on: November 13, 2016, 10:27:32 PM
|
yea i know mines about a the same power cost i could run one all day long forever at 520 or 540 wats for the 136MH over my 146 mh one that uses double that . and also i could or can keep using my other one but use three boards which would put me at 225 MH at the power cost off all six boards and save on the cost of a 280 MH for the time being . owell no cash in time i plan to get a few . and keep the older one speed is speed and the Differently is not to bad i don't see that going high to fast . like btc . Don't forget alt coins seem to scale different because there is so many of them and one BTC .
|
|
|
968
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SILENTARMY v5: Zcash miner, 115 sol/s on R9 Nano, 70 sol/s on GTX 1070
|
on: November 13, 2016, 09:43:55 PM
|
claymore did it again, time for payback
did what i haven't followed him sense this went windows .nm I see v5 i guess it's faster I'll won't comment on, i keep it to my self let some one else go there . but at 2.5 % fee hint ,!!! wow one 470 Total Speed: 115.515 H/s, Total Shares: 3, Rejected: 0, Time: 00:00
|
|
|
970
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Innosilicon A4 Dominator Mining ---- anybody else have any of these?
|
on: November 13, 2016, 09:17:14 PM
|
as far as the 400 less, again they still aren't including the power supply. which for a good one can run you quite a bit of money. I chose the ones I did because of the high power consumption efficiency rating and the 10 year manufacturers warranty. my selling point is that its a complete, turnkey kit. Im honest and I have made sure they all work as advertised. i don't know what their procedures are but i am guessing that they just ship you the ones straight from the factory, still in box, unopened. Again, I don't know. but I'd be willing to match their price item for item. $2450 for 2-miners & 1-control box with 4 connecting wires to go between control box and the 4 blades housed in the 2 units. i guess i can buy a used Power supply for 30 bucks or less that will work and break out board are not that hard to get and don't cost much you can get a few cheaper with cables some place else but yea i guess the cost of one with cables might be or little less then what they offer on ebay.again I'm not trying to make you look bad I just notice those things . side hack has a nice breakout board that would do it and fits two different sized or maybe more Server PSU those two PSU can power one 280 MH or use the other PSU it can power one 136 mH miner, i have the board it does work on both server PSU or have two of them . . I'm broke right now or i might try to buy one of the 136 MH miner and replace my 146 mh miner only because of the power use age getting that 136 MH is worth losing 10 MH , i put that to gather with some Alchemist boards . again no offense is intended.
|
|
|
973
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Alchemist updated support added for RPI with a broke controler
|
on: November 13, 2016, 07:28:51 PM
|
cool i got a board that needs to be looked at to, it gets warm can't be flashed or the PI doesn't see it, if i try to flash it, no go doesn't see it ;. id ask him but i think i may have broke all tries between me and him, Pissed him off the other day in a post he made i said something i shouldn't have, I'm not sorry i said it either . owell my lose . let me know on the board i may buy it if the price is right they are still good miner even after the A4 came out so i won't give up my five working boards and a while back, i missed out on one board on Ebay it sold on a bid for 25 bucks or some really low price. . i didn't bid or watch the bid because i thought for sure it would go shy high . I end up using this https://www.amazon.com/gp/product/B013OK10YM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 any thing i tried wouldn't work with four or more boards this fired up 6 boards easy i also dropped one board for sure mess it up beyond repair and donated one to a school in ZA . the miner came with one bad board or may not be bad but was bricked and a bad non working controller that was the selling point no one would buy it, why i got it so cheap at the time , the owner told me he flashed some of the boards so i flashed them all . it had 7 working boards but due to above I'm left with 5 that work and possible one more that may work if i can find some one to look at it . oyea one other thing don't take off any boards from the heat sink unless you really really need to there must be 7 inch or more of T paste on them, i see why but wow that's a lot of paste. and one big mess if you take off a board . Quote from: Ortek on Today at 04:41:18 PM im sending them to J4bberwock
Where is he? Can you please give contact or homepage for his repair shop? Or is this an forummember? Thanks you :-)
anyone that posts on the forums is a member, active or not, is another question .
|
|
|
974
|
Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs
|
on: November 13, 2016, 06:48:07 PM
|
Still Haters for life huh?
Not sure who punin is at bitfury but they seem to be the only non Chinese manufacturer/engineers out there
I'm not sure where the wafers come from.... probably still china but there company at least isn't based in mainland china.
You think China is cool, guess again they focebly displaced and demolished homes of over 80,000 people for the Olympic Games. Every single human rights lawyer who spoke up was made to disappear many never returned ...
Let's not talk smack about them...
The s1's are 15$, that's how much I sent sidehack for the donation if nothing comes of it I'll make a f***ing art piece or something.
Let's all try and be more mature than our American politicians (I don't discriminate both sides dropped the ball)
I willing to bet form china yup . that might be part the problem as well as being greedily . and Trump this gonna be a fun four years . he may do it and label china like he said that would hurt them but well see . I don't think China is cool at all i wouldn't want to live there other then the land it self which is very beautiful . but to live there and follow there rules, id be in jail fast or dead but i guess if i was born there etc it might be different can't really say, i know now i couldn't. I don't think Russia is much better then china it might have a little more freedom but nothing like we have in the states .I think that's were bitfury is based at or is part of Russia. with the all money that can be made in making your own chips,I am really amazed why the US doesn't have at least one planet here that does it, i would think the demand would be unbelievable in the US. but then again i don't understand everything that involved in making chips i mean does china have some thing we would need to make them or it's easy to get there . i understand how there made etc , i guess it's more how hard are some supply's to get .we have some of the smartest people in the world in the US so that's not it .
|
|
|
975
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: AlcheMiner/MAT New Firmware and BFGMiner port!
|
on: November 13, 2016, 05:55:32 PM
|
I Installed minera now again and get the same issue, that minera dont want save any changes and the saving popup dont going away. And all files are in the right destination... why i have replace anything? Otherwise on the startpage i have JSON errors. So, i got one Minera to running on the MAT, what are cleaned from Python Miner. But i have Problems with the MAT, which dont cleaned by me. The *** python miner grabing the hashboard before minera can do this and because minera, i cant go to the python miner to terminate this... Another problem with minera is, that an reboot is like lotto, you dont know what will be happened with minera, once its dead and needed to be reinstall, once all savings are deleted, once it changed to cpuminer, once my pools are changed to the donation pools... And by the MAT, which is with running minera, i miss 60mh/s... Commandline bfgminer is still the best actually it's the same with mniera or not the problem if you not willing to give it shot it with any PI type controller make you own your USB->UART dongles and run it with a good usb 2 or 3 hub self powered to a PI of your choice after you follow this guide https://bitcointalk.org/index.php?topic=1468120.0I list every thing you need , i don't make videos, i hate making video and never will . i can add more pictures, i guess if needed . to lazy, I guess why i didn't. in minera don't use CPU miner or if you manually install it edit one of the files and set BFG as default on install . i know there is adds just pay 5 bucks to remove them forever, it is very stable if you use Ubuntu 16 and manually install minera but you have to use 7.0 php and change some lines in the install_minera.sh so it installs right with Ubuntu 16 and i also added this miner to the miners_conf.json with presets as part of a manual install. if you want a copy of those files I'll give them a way freely .I even had minera eth mining as the controller on a rig with three RX 470 sort of, to see if i could but sense i don't like using Ubuntu as my main OS and don't mind using it on PI's . i put my PC back to windows . did you PM JSTEFANOP in a nice way and offer to pay for his time, that might work . Thank you, i try it today.
Can you please answer what means "128" ? :-)
I have no idea never had to worry about it or came across it, if i had id be more then willing to share what it means and how to fix it. i do know it has some thing to do with Java script i looked it up once but didn't fine much other then it's a java function of some kind . I may even be wrong about that .
|
|
|
976
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SILENTARMY v5: Zcash miner, 115 sol/s on R9 Nano, 70 sol/s on GTX 1070
|
on: November 13, 2016, 05:42:13 PM
|
Click on Phython then select Py3K language interpreter by selecting couple of check boxes (forgot what they are called). Install and enjoy! Can you give me some detail about selecting Py3K. I downloaded Cyqwin 64bits windows version and phython 3.6 i believed. Select Py3K from the list tip if you type Python3 in the search box it puts the Py3K language interpreter at the top of the Python3 list instead looking thu the long list .
|
|
|
977
|
Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs
|
on: November 13, 2016, 03:36:47 PM
|
my thought i know it won't happen they should give him the chips for the BS and lies they feed us,to cover his time while they strung him a long, he should sell his design and keep the cash . but i know that will never happen well be lucky if he gets 20 k worth of chips with out a lot more lies and bs and then no chips. the good part is side would be more honest then any of them ever .I would like to eat what i just said about Bitfury but it's true money talks loud..
Oh I agree 1000%,sidehack has been awesome & has fantastic moral & ethical standards.Too bad Bitfury couldn't care less about the same................ But it's ok,I made 700+ btc since june 2011 & lost it all buying ASIC after ASIC to chase more btc.......glad that's over I made the dollars back but never the btc Back to GPU's fer me Unless sidehack is allowed to do what he does best why i went back to GPU mining I'm getting some place and making some thing and don't want to stop mining anymore. if side can ever make them see the light, I'll go back to mining BTC direct . greed you know LMAO there not the only game in town and should worry. thanks top.
|
|
|
979
|
Bitcoin / Hardware / Re: GekkoScience is now dabbling with 16nm ASICs for new designs
|
on: November 13, 2016, 08:21:42 AM
|
my thought i know it won't happen they should give him the chips for the BS and lies they feed us,to cover his time while they strung him a long, he should sell his design and keep the cash . but i know that will never happen well be lucky if he gets 20 k worth of chips with out a lot more lies and bs and then no chips. the good part is side would be more honest then any of them ever .I would like to eat what i just said about Bitfury but it's true money talks loud..
|
|
|
|