Thanks for the advice

I have tried 5 in one mobo with Windows 8 and 13.12 drivers.

I can confirm that works OK.

Windows 7 only detects 4 cards, Windows 8 detects all 5 OK and mines OK too.

Hi,

Did you get to the bottom of this?

I am having exact same problem, need Windows 8 maybe? Does it work?

I have no experience at all with Linux and there are no easy step by step guides to follow

Thanks for the reply.

I don't think 13.6 will support the R9 290? I know that the 13.9 driver doesn't I have to use 13.11 or 13.12.

Got 4 cards working fine now, but add a 5th and windows detects a driver error and the 5th card doesn't work.

I can have 4 cards working in any of the 5 slots which should mean the PCIE slots are OK, but there is an issue with having 5 cards plugged in.

Any ideas?

I tried new drivers and doesn't seem to work.

I tried the 3rd card powered with another supply and that doesn't work as it should either.

Windows pretty much freezes as all 3 start to run, then eventually reboots.

On another note - my PSU keeps turning off. I have it shorted between green and black wire but after a few minutes it turns off. How do I get it to stay on?

Hi,

I am also unable to get a payout.

I had it set to payout every 10k. It's now up to 40k and no payout.

I tried a manual one and nothing. Balance is still in pool.

Username is miztaziggy

Ok thanks, ill give that a try.

Why does removing and reinstalling seem to work I wonder?

I was going to try uninstalling 13.12 and reinstalling 13.9 and then trying the 13.11 beta drivers.

Which ones are you using?

Hi wondred if anyone on here had any idea what may be wrong with my R9s (Sapphire)

The plan is for 5 on one board, I have 10 in total and 2 boards.
I am waiting for powered risers to come, so only tried 3 in one board. I used 1x risers to connect all 3.

Now connecting one card works fine, connecting 2 cards to the 16x slots (with 1x risers) works fine too and boots to windows showing the bios screen and everything in between.

Adding a 3rd card makes the screen blank until it gets to Windows where it appears. It does detect all 3 cards in device manager OK.

Now with 2 cards installed I can mine with similar settings to those in these posts with about 830 KH but every time I quit CGminer I get BSOD with ati driver error. Perhaps it's the 13.12 new driver I upgraded to?

If I install the 3rd card, CGminer opens but almost as soon as it starts, Windows goes to black screen and BSOD restart.

I am at my wits end with it. Not sure what it could be other than these:
- 13.12 drivers? Maybe roll back to 13.9 but do these work with the R9 290?
- Powered riser required for 1x PCI slot and not enough power crashing the card?
- Incompatible motherboard? I am using Gigabyte Z68AP-D3 with celeron 1155 processor and 8GB ram. Although with the same motherboards i have rigs set up running 3 x 6970 and 3 x 6950.
Funnily enough one rig with 1 x 6950 and 2 x 6970 only shows the screen when it gets to windows and is blank before that.
- Maybe the wire to short the 1x PCI slot, but I am using the 1st slot which doesnt usually require that wire, and also Windows does detect it as a card.
- Maybe the R9 isnt supposed to go 3 way?

What about the DOGE I had accumulated on that previous address?

I can't log into the new website with my old username and password, therefore cant' access my balance.

Old website still offline so I can't withdraw it there either....

Please let me know when ill have access to it again

Can't get the client to sync, just shows 0 connections.

I have tried all the nodes from the conf file settings above, but nothing works

Wow!!

DEX2VqYwsJH6SuBggVGbkujDKtboTEerJV

Much thanks

Wow!!

DEX2VqYwsJH6SuBggVGbkujDKtboTEerJV

Much thanks

What's that?

Other than the 21 BTC he took from the early adopters.

Then the almost 6000 BTC the early adopters tried to sell those same coins for?


Buy you're right, NXT is definitely offering something different, all the other coins feel like a finished product, vs this buggy piece of crap that feels like a total cheap ass scam.

I just tried to send a transaction of 24.7 CSC with a 0.06 fee.

I got a message saying it was rejected and that the coins may have already been spent. The transaction now sits there on my wallet with a ? and a negative amount showing.

Here's my address showing incoming transactions:
http://casinocoin.mooo.com/address/CKc5xYyC5KWaYEzz8gw2prMYpcy8VdGmDw

It's odd, this line is the last one that was there before I tried to send:
c5911ef98c...   103651   2013-12-15 00:25:20   2.11304256   24.53892016   CSC

Note the balance says 24.53 yet my wallet said 24.77 at the time. Is this why the transaction rejected?

And how do I get those coins back? Are they just lost in the ether now?

Lol that's rich.

All this time, I have been asking for proof of these extra features of this coin and nothing yet....

Just look at what NXT offers RIGHT NOW.
- A buggy client
- A 100% premined coin
- A coin that isn't even divisible by any decimal places
- An unsecure wallet key that can be brute forced with ease (apparently only if you have never sent any NXT before which will account for 75% of the stakeholders)

Everything else that some of you think is so promising hasn't been proved, only talked about, yet you all swallow it, hook, line and sinker. 

And also CfB is probably == BCnext and hence why he is pushing it so hard and why he seems to have all the badly written code.

Lol good luck with that.

Ill be sure to PM you when it's proved it's a scam and eMunie takes off

Edited my 1st post, it's miningco pool

Right....so the lack of coin is down to the pool then and not the fact that it's PPLNS?

Problem is NXT isn't just an inflated copy coin, it's a real full on fraud coin.

It promises to be different and Bitcoin 2.0, however it is half finished garbage. There are fewer features than any other coin, it is really basic and really buggy/badly designed.

It is 100% premined and handed out to 71 select few. They are trying to sell it off for about 300x its initial cost.

If ever there was a coin that was created as a total scam to make money for the developer, this is it.

At 1380 KH according to the calculator I should be getting almost 400 per hour.

***EDIT**** NOT P2POOL LIKE I ORIGINALLY SAID, I MEANT MININGPOOL.CO

Now on miningpool.co, I have been mining for about 8 hours.

It took about an hour to even mine 1 coin.

After that I have been getting a steady stream of coins but after 8 hours I am only up to 440.

I am getting about 40-60 an hour right now.

Is this pool a scam or something?

Excellent. Thank you