|
Small Update: Rebar Support is not an option it needs Generation 10 CPU and that Board support only Generation 6+7, so that is a dead end.
|
|
|
|
Small Update i got a lead from reddit :
Does the BIOS have resizeable bar support? I heard that P100/P40 requires this for multiple cards to work well.
i could not locate resizable Bar Support in the American Megatrends Bios ;(
somehow i cannot add pictures here, otherwise i would have share the bios options.
I think you have something here, but probably not leading to a solution. It could be the B250 chipset. I have a Asus B350 with rebar but it's not documented in the manual so possibly was introduced with B450 and back ported to B350 with a BIOS update. It's unlikely possible on the B250 but if so would require the update from Onda. The Problem is, Onda is not very supportive at all, as most of these chinese "cheap,cheap,cheap" mining companys... |
|
|
|
Small Update i got a lead from reddit :
Does the BIOS have resizeable bar support? I heard that P100/P40 requires this for multiple cards to work well.
i could not locate resizable Bar Support in the American Megatrends Bios ;(
somehow i cannot add pictures here, otherwise i would have share the bios options.
1) No it does not. Or at least it did not the last time I used one of these boards. 2) Is it *really* worth all the time you have been putting into this? Would you be better off getting something that is known to support it. YES there is a cost, but how much are you loosing each day not running all the cards? 3) Go to https://www.talkimg.com/ and you can upload an image there and then post it here. If you want an account react out to @joker_josue https://bitcointalk.org/index.php?action=profile;u=97582-Dave Thanks Dave for the heads up, appreciated. currently i have a truckload of theses ondo cases sitting and catching dust. We currently deploy that batch of P100 with GPU Server that can take 8 of them at a time and work flawlessly. When i get the ondo cases working, i could deploy a second batch P100 pretty rapidly. So yes, it is worth the time, cause otherwise the ondo cases are dead in the water. |
|
|
|
|
Small Update i got a lead from reddit :
Does the BIOS have resizeable bar support? I heard that P100/P40 requires this for multiple cards to work well.
i could not locate resizable Bar Support in the American Megatrends Bios ;(
somehow i cannot add pictures here, otherwise i would have share the bios options.
|
|
|
|
yeah, sadly they did not find a solution either ;( |
|
|
|
Just to keep you all in the loop, the Celeron theory was tested  i bought i3-4 Core CPU, same result. i suspect the B250 Chipset and how the PCI Lanes are address is part of the Problem. Expensive Lesson for us, as we have to buy now Server ontop of the cases we got initially. (we event tried two other different Mining mainboards, but they had also the B250 Chipsets and did not work out.) We even were going as far as getting an Octominer Case, but that did not work either. Only working solition so far was a professional Server System. Is it works with riser? Is it windows?or? Driver? it is on bios level, and no riser do not work either. we stopped the efforts on this one, we bought professional Server now. |
|
|
|
Just to keep you all in the loop, the Celeron theory was tested i bought i3-4 Core CPU, same result. i suspect the B250 Chipset and how the PCI Lanes are address is part of the Problem. Expensive Lesson for us, as we have to buy now Server ontop of the cases we got initially. (we event tried two other different Mining mainboards, but they had also the B250 Chipsets and did not work out.) We even were going as far as getting an Octominer Case, but that did not work either. Only working solition so far was a professional Server System. |
|
|
|
|
I gave up and moved to a IBM Server System looks like everything with a B250 Chipset and PCI-Lane splitting will not work for the P100, sad ;(
|
|
|
|
|
Bigger CPU is coming in today, but 4-Core is the max. for that board anyway. Bios update is not so easy, as i could not find any newer bios at all.
|
|
|
|
update, replaced the M2. with SSD, no change, also CSM on or of does not change anything. also UEFI vs. Legacy seem to be not a factor. With 3 cards it won't post at all, just a black screen
t
You need to determine if it's a display issue or boot issue, Any difference in beep tones if your MB has a speaker? Does it respond to a ping? I assume you've tried different cards in different slots to rule that out. Do your Teslas have display output? Check those if you have no ouput from iGPU. Don't forget about VM. Try a different OS. Hey, Tesla don't have a Video Output, and it is Hive installed, so even if no video output would be there, it would boot into hive, (which is not happening). I tried also Windows, but again it is not going to boot at all. It is all quite, does not beep and Monitor does not turn on at any time. |
|
|
|
|
update, replaced the M2. with SSD, no change, also CSM on or of does not change anything. also UEFI vs. Legacy seem to be not a factor. With 3 cards it won't post at all, just a black screen
t
|
|
|
|
Available PCIe lanes could also be an issue considering the CPU Is Celeron. Try with a SATA SSD instead of m2NVME and check if any other peripherals
share lanes with the PCIe slots. Also make sure all the motherboard's extra power connectors are powered.
I get the feeling that Celeron & Tesla are a bad combination, like putting cheap tires on a Ferrari.
good input, will try that out |
|
|
|
|
Foreigners are prohibited from owning land in the Philippines...
|
|
|
|
|
Hi Guys,
i have here multiple Tesla P100 16 GB and try to get them working in a Mining Case with a Onda B250-D12P-D1 Motherboard.
Whole Setup:
2550Watt Power Supply
celeron cpu
8 GB DDR3 RAM
M2 Drive (64 gig)
8X Tesla P100 16 GB PCIE
If i add 2 Tesla P100 Cards it is working as expected, as soon as i add a 3rd card i have a black Screen and Rig does not boot up and hive is marking it as offline.
Bios has:
4 GB encoding active
CSM off
For the first who provides me a Solution to get the Rig fully populated with 8 Tesla P100 Cards working i will send out 100$ in USDT as a reward!
|
|
|
|
|
Hi, hat jemand aktuell eine gute Übersicht wo CPU Miner günstig zu hosten sind? Momentan tendiere ich zu Norwegen, jemand eine bessere Idee?
Gesucht wird für den Anfang 1 Rack 42HE-47HE - 15KW
Sind alles Standart Server 2 He (20X 2HE)
Cheers
|
|
|
|
looks like it was down for that period, works now again. Just checked, the store link still works for me. Thanks. However, 1 some networks block the access to atshop store, please check with another different ISPs or proxy/VPN. 2 sometimes the atshop is down (this case is rather rare.) |
|
|
|
your store link is dead. AWS credit codes are still available. About Payment gateways change Payment gateways: BTC, ETH, LTC, USDT, XMR, and other kinds of crypto coins. If you need other crypto coins not supported yet. Please let me know. No PayPal payment support now. Please use crypto coin payment instead. Thanks. USDT (TRON/TRC20) and LTC are suggested for their low transaction fee. You can buy USDT (TRON/TRC20) on an exchange such as Binance, Coinbase, or others. For 10 or more codes in a batch, a 5% off bulk discount is provided. For this 5% off bulk discount, please contact me and pay me directly by crypto. One confirmation is needed before the delivery of the codes. The store has been moved back to https://leonsnow.atshop.io/The ATShop site supports many more kinds of crypto coins. Please access the new store instead. Thanks. Telegram Support moved back to https://t.me/hmobile2000Or please contact by Email: LeonSnow@gmail.com |
|
|
|
|
Vindax is still one of the worst exchanges i have ever dealed with. Site is quite often not reachable since it looks like the are not capable of configuring their Cloudflare instance...
|
|
|
|
Btw. just did the Setup of the Validator, great job with the Guide and cannot wait to see the rewards trickel in |
|
|
|
|
Dunno why my First Post was deleted from the Moderator but again: Great Job Guys, pretty much looking forward to the next steps!
|
|
|
|
|
Show Posts
