 Show Posts
|
|
Pages: [1]
|
To "factory reset" a pi, usually you just take the SD card out and reprogram it...
That's what I suggested, so I'm confused why he says that wouldn't work :/ I have tried it again and still the same. I guess I have other problems with the system. Any ideas? |
|
|
|
I am useing a Raspberry Pi. The link seems to be for a Tp-Link. You didn't say, most people use TP-Links. If its a Pi just image the SD and start again, won't take more than 10 minuites. Tried that 1st thing. So why don't most people use the Raspberry Pi? TP Link is cheaper and is simpler. I bought one awhile ago, just never set it up. Any good instructions on setting it up? |
|
|
|
I am useing a Raspberry Pi. The link seems to be for a Tp-Link. You didn't say, most people use TP-Links. If its a Pi just image the SD and start again, won't take more than 10 minuites. Tried that 1st thing. So why don't most people use the Raspberry Pi? |
|
|
|
I am useing a Raspberry Pi. The link seems to be for a Tp-Link. |
|
|
|
|
Was wondering. Would anyone be interested in water cooling the S1? I have a machine shop and I have a few S1 units. Was thinking about it. What do you all think?
Jeff
|
|
|
|
|
How do you reset to factory an Avalon2? Was logged in adjusting the network settings. Lost power and now I cannot log in at all. I ran IP scanner and it doesn't show up.
Help??
Jeff
|
|
|
|
|
Fluxuation in miner speed. As I watch the miners. I have noticed a 30 to 50 percent fluctuation in the speed on the miners. They all do it, and at different times. Miner 1 will be running at 180 GH/s Miner 2 Will be at 185 GH/s and Miner 3 Will be at 195 GH/s. Then one of them will drop to 135 GH/s. The rest stay close to what they were. Then a few minutes later one of the others will drop to 120 GH/s and the one that was at 135 GH/s will be back to 185 or so GH/s Any ideas as to why? This goes on all day long..
|
|
|
|
New question.
Before I thought about it I had bought two Avalon2 miners. The other arrived today. I know the address of the 1 is 192.168.0.100 When you are setting up the miner. The one is running on that address. How would I access the new one? Do I change the address on the 1st one? If so how? Then use the common address for the 2nd one?
Thanks,
Jeff
Change the address of the first one, yes. Easiest way is to set its address type to DCHP, then your router will give it an address. O.K. When I change the address. Does it give me a new address to use to log in with? How do I log into the old Avalon2 via the web browser? When you go DCHP, login to your router and find the list of devices to find the IP your router gave the first device. DCHP just means instead of the Avalon going: "IM AT THIS IP FUCK YOU ALL" it gets what its given. Thank you so much for your help. I run a machine shop. When I learned to program it was back in the 8088 and 286 days. I have been reading up and learning allot. |
|
|
|
New question.
Before I thought about it I had bought two Avalon2 miners. The other arrived today. I know the address of the 1 is 192.168.0.100 When you are setting up the miner. The one is running on that address. How would I access the new one? Do I change the address on the 1st one? If so how? Then use the common address for the 2nd one?
Thanks,
Jeff
Change the address of the first one, yes. Easiest way is to set its address type to DCHP, then your router will give it an address. O.K. When I change the address. Does it give me a new address to use to log in with? How do I log into the old Avalon2 via the web browser? |
|
|
|
Looks fine to me. Utility is a bit higher though. You got the difficulty set correctly? Difficulty? Where is that setting? I haven't changed any setting. All I did was set the password and entered in the miners and address's It is all still factory settings. It will be at your pool unless it already has auto difficulty. It's auto I believe. I really don't understand, but it is now working. Last night I added a small miner I picked up. Want to use it to explore other coins. While the larger miners worked away. It is a Klondike K16. As soon as I added it to the works. The Avalon ramped up to 110 GH/s for the1st time . Been running great since. Thought I would share this. So if knows why this changed everything, it could help them if they are having trouble. I would like to thank Dogie for all of his help.. Thank you.. Jeff |
|
|
|
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it? I am running CoolMax 80 Plus ZX series 600 watt. You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working. Thank you, after lunch I will put another one on it and try it. Will post what I find. O.K. in the miner status it is reporting 110,861 MHSAV. On eclipse it is reporting 15.8 GH/s. My other miners are reporting close to the same numbers in eclipse as what is reported by the miner. I'm also using MultiMiner to watch the miners. The avalon2 is the only one that doesn't show up in MultiMiner. Changing the power supply doesn't seem to make any difference. Try a more standard pool like btcguild. I will try that one this evening. I tried it on slush's also same results. |
|
|
|
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it? I am running CoolMax 80 Plus ZX series 600 watt. You'll need to test with another PSU, as its unusual to get some but degraded performance when something isnt working. Thank you, after lunch I will put another one on it and try it. Will post what I find. |
|
|
|
I received an Avalon2 105 about a week and a half ago. Just found time to set it up. I'm only getting 25 to 30 GH/s. I have more rejected than accepted. Running a 600 watt supply Raspberry Pi.
Anyone have any idea?
Exactly what PSU is it? I am running CoolMax 80 Plus ZX series 600 watt. |
|
|
|
|
