|
1002
|
Economy / Computer hardware / Re: Looking for sp20 controller boards
|
on: October 09, 2015, 02:50:55 PM
|
wtb 2x sp20 controller boards or wts 2 sp20's needing controller boards
So you refuse my offer ? like i said 1 btc for both and thats more than fair.. i don't know if i would call what you suggest an offer I recall you said in private, let's wait 24 hours and we could settle this for 200$ US. That was like 0.8 BTC. So now my offer is not an offer ? My offer was 150$ (about 0.6 BTC) US for both + I pay shipping. You're not even sure the boards are working (Non-tested). I think this is an honest offer considering that fact. I was going to throw in about 250$ us for 4 non-tested boards / 2 non-working SP20. BTW I remember I helped you safe one of your SP20 a few weeks ago. Called me a "Genious". I was happy to help you. Apparently, this one way only. Good luck with your sale |
|
|
|
|
1007
|
Bitcoin / Pools / Re: Sidehack stick solo pool club
|
on: October 07, 2015, 03:29:36 AM
|
Guys I'm being a dummy. I'm looking for the chart that compares frequency to GH but I can't find it. Even in the Google! If someone has the link i'd appreciate it.
sidehack sticks do 55% of freq so 125 freq = 6.875 gh 150 freq = 8.250 gh 175 freq = 9.625 gh 200 freq = 11.000 gh 225 freq = 12.375 gh 250 freq = 13.750 gh 275 freq = 14.135 gh 300 freq = 16.500 gh 325 freq = 17.875 gh 350 freq = 19.250 gh 375 freq = 20.625 gh 400 freq = 22.000 gh I run 20 sticks at freq 250 I should do 275gh I am doing about 272gh Mine at 125 is currently at 6.870 ;-) |
|
|
|
|
1008
|
Bitcoin / Hardware / Re: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH
|
on: October 06, 2015, 06:03:18 PM
|
600MHz is the maximum frequency?
I have one cold place, where is always between 0-10C only . Is any chance to overclock?
If the HW Error rate is zero / low at 600MHz, and you are not concerned about Warranty then probably yes. The BM1385 Data Sheet suggests that 675MHz should be possible with 12V. However as they have had to de-rate some units to 575MHz it seems that for some reason they are not meeting spec in the S7 so I suspect they may not go that high? However only one way to find out. Would take it up one step at a time and carefully monitor the temperatures.  Rich Yeah it's like one of my S3 not able to run at 441 (droping at 415-420 over a long period of time) ... and the other one runs at 504 for over a year and is stable like a rock |
|
|
|
|
1009
|
Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 0.5% fee anonymous solo bitcoin mining 104 blocks solved!
|
on: October 06, 2015, 03:42:02 AM
|
my s1 show best share of over 350 million but my s3 shows only 5 million and when I check my user states its at 5 million best share?
The web site reset the best share everytime someone find a block. It means, you had a best share of 350m before we found it. my S1 still shows over 350 million share n has not reset or do I reset it my self? but off the stats its not showing over 350 million? Thanks also for the reply as I'm kind of new to the mining game but a tad familiar due to extensive research Your miner won't reset his bestshare, it's only the pool who reset the bestshare stats on his side when a block is found by the pool. You can reboot your miner if you absolutely want the bestshare to be reset. You could also just restart the cgminer (software use by your S1 to mine at the pool) by clicking save and apply button in the miner configuration page (I guess it'll work, you can test it) |
|
|
|
|
1010
|
Bitcoin / Hardware / Re: GekkoScience Compac BM1384 Stickminer Official Support Thread
|
on: October 06, 2015, 03:33:03 AM
|
I set my compact to 125mhz, since them no more HW or reset ;-) (18 hours)
I've been running two sticks at 306 MHz powered by USB Y cables for 5 days straight with 1 HW error. Each stick is running at 16 GH/s. Originally I was running at 150 MHz and 8 GHs each with stock USB power and a whole lot more HW errors. If you have the available current with your USB hub, you should be able to turn up the frequency and manually increase the voltage via the pot by the USB connector to achieve a balance between frequency and performance. Short answer: these suckers are meant to be tweaked, so have some fun and optimize the hell out of them  Yeah i was running it at 150 but apparently the stick couldn't be stable over time with my usb port on my PC. I ordered from some Y, waiting for them ;-) |
|
|
|
|
1016
|
Bitcoin / Pools / Re: Sidehack stick solo pool club
|
on: October 05, 2015, 06:17:07 AM
|
I've restarted the solo pool with new code to add some stats that should make it easier to track workers now. See the solo thread for details. Good luck!
Awesome thanks ! |
|
|
|
|
1017
|
Bitcoin / Mining speculation / Re: How good is 10TH/s?
|
on: October 04, 2015, 02:19:22 AM
|
Ok so I ordered some new mining hardware, and when it comes in and is all set up is should be slightly over the 10TH/s mark. I plan on pool mining, but my question is; at this point is it enough to solo mine? Would I have a good chance at finding any blocks? Just for example purposes what would I possibly be able to find in a period of 1 month?
Solo = too risky Pool = 2.481 BTC depending of the luck of the pool (Variance) but this at the current Difficulty ... as it increase, you loose income. |
|
|
|
|
1019
|
Bitcoin / Mining speculation / Re: Diff thread Oct 1 to Oct 14 picks are Open. 2x bonus! + a surprise?
|
on: October 03, 2015, 06:57:17 PM
|
Picks are open.
To the person that sent a pm to me yesterday with a pre pick. You can now give that pick but if someone beats you to it oh well.
-1.01% to -1.35% philipma1957 ---- I would only get the 0.2 btc - no surprise for me
+2.01% to +2.25% HerbPean ----------note correction from 2.01 to 2.50
+2.26% to +2.50% edonkey
+3.01% to +3.25% wlefever
+3.26% to +3.50% Biodom
+3.51% to +3.75% d57heinz
Oups my bad, thanks Phil ! |
|
|
|
|
Show Posts
