Nobody mines with amd gpu? Try to setup 1 rig to test 24h but can use only 4 gpu, if try with 6 gpu 2 dont work.
Setup my config file like this:
[[mining.gpu_config]] device = 0 driver = 2
[[mining.gpu_config]] device = 1 driver = 2
[[mining.gpu_config]] device = 2 driver = 2
[[mining.gpu_config]] device = 3 driver = 2
[[mining.gpu_config]] device = 4 driver = 2
[[mining.gpu_config]] device = 5 driver = 2
If try with one gpu at time works, but when try all together max 4 gpu works. Win10 with Adrenalin 20.9.1 and epic-miner 2.3.1
|
|
|
For amd gpu only epic-miner-opencl is available? Try to mine on icemining with 6x570 rig, get around 8 mhs for each card, progpow algo. And, other question, dual mining with other coin is possible only with nvidia miner? Example, with my 4 gb amd gpu mine Ergo, but it would be nice to mine ergo by default and when epic progpow time coming mine epic then back to ergo. Something like teamred or srbminer made for zilliqa.
|
|
|
Yes. Confirm. Coinotron help me to solve the problem. All is ok, thankyou.
|
|
|
Before to write here try to contact pool admin with mail, but no response. How can change my withdraw address, every time i try to do give this: i can wait a day but nothing change. Also on my mail box dont have nothing from coinotron, in all folders, i check.
|
|
|
0-monitor 1-rx5700 2-7-rx470_4gb RAVEOS 1.0.24 ( 1851 ) 5.10.0-rc6-mining-mod( 8548 ) BETA DAG 387 BIOS GEN2 --4g-alloc-size 4082 --zombie-tune 2 181.58 Mh/s 54.02 21.81 21.28 20.60 20.90 21.17 21.80 --4g-alloc-size 4082 --zombie-tune 1 182.33 Mh/s 54.08 21.61 20.46 21.14 21.82 21.96 21.26
TRM --eth_4g_max_alloc=4082 185.12 Mh/s 54.23 22.02 20.98 21.62 22.20 22.29 21.78
4gb card run stable with 4082 alloc size? I can run stable on hiveos at 4080, also 4082 work but after 5 minute stop to work. What driver use? If they crash is normally OC they are at the maximum and any memory error crash them... reduce normally memory OC 1st, or try to reduce 4080 Must try with lower oc memory, at 4080 works stable for day but 4082 6 minutes and stop work.
|
|
|
0-monitor 1-rx5700 2-7-rx470_4gb RAVEOS 1.0.24 ( 1851 ) 5.10.0-rc6-mining-mod( 8548 ) BETA DAG 387 BIOS GEN2 --4g-alloc-size 4082 --zombie-tune 2 181.58 Mh/s 54.02 21.81 21.28 20.60 20.90 21.17 21.80 --4g-alloc-size 4082 --zombie-tune 1 182.33 Mh/s 54.08 21.61 20.46 21.14 21.82 21.96 21.26
TRM --eth_4g_max_alloc=4082 185.12 Mh/s 54.23 22.02 20.98 21.62 22.20 22.29 21.78
4gb card run stable with 4082 alloc size? I can run stable on hiveos at 4080, also 4082 work but after 5 minute stop to work. What driver use?
|
|
|
Hi. I have a question, is possible to decode Claymore strap to use on other mining software like phoenix and trm. I try this, install latest amdmemtweak xl and claymore 15. First step: start claymore with strap option, all ok, claymore apply POL4H1 strap and start mining. Second step: open amdmemtweak and check bios strap on strap control box. But i see only orginal gpu strap not claymore new strap. You can help me? Thank you.
|
|
|
Dual eth+ckb working on amd 4gb rx card?
Only ckb works good, but if try dual get card not supported or similar error.
With nbminer working good.
Try with 18.6.1 and 19.4.x driver without success.
|
|
|
Hi.
Works with srbminer-multi?
I have to select option3 like with normal srbminer?
|
|
|
You may take a look on Bismuth(SHA-224) Yes, Bismuth would be nice.
|
|
|
Work fine on k12 for some hour and then crash. Clean win10 install 19.4.3 driver Adrenalin. Same result on 7 6x570 rig.
|
|
|
False report! every Antivirus report miner as dangerous. im using it on my 15 rig without problem.
|
|
|
Yes, i know, this is only core watt like hwinfo report.
|
|
|
I proceed like this, I don't know if it's okay but I can have quite stable results. Example with one Sapphire Rx570 Nitro 4 gb Hynix, vga bios coming with 2 different chip strap, Elpida and Hynix but my card is equipped only with Hynix H5GC4H24AJ. I tested a lot of strap but memory limit without error is in range 2045 - 2050 mhz, acceptable mem error until 2070 mhz more than 2070 i can not go without thousand of error. Overclock and undervolt from Phoenix Miner or with OverdriveNT with the same result. Ref parameter is set to 30. 1100 - 2050 [900 - 900] 30.65 86w 1110 - 2050 [900 - 900] 30.7 86w 1120 - 2050 [900 - 900] 30.8 86w 1130 - 2050 [900 - 900] 30.95 86w 1140 - 2050 [900 - 900] 31.3 86w 1150 - 2050 [925 - 900] 31.55 90w 1160 - 2050 [925 - 900] 31.6 92w 1170 - 2050 [925 - 900] 31.65 92w 1180 - 2050 [925 - 900] 31.65 92w Clock > 1160 with ref 30 dont give me more hs so i set to 1150 - 2050 [ 925 - 900 ] for ~ 90w and go stable for days without error. I can go down with core to ~915mv but after some time go to 0 h/s and restart. Some question: - for cvddc i made test with increase of 10mv each step, but effective cvddc in hwinfo is always a few mv less, exist a precise way to increase or decrease the core voltage? 6 mv step or 8 mv step or other?
- plus or minus mv to memory affect memory error?
|
|
|
Hi. Only a question, i spent last days to update my farm with good result.
With old version i start the miner, and then hwinfo for monitoring hw error and works fine.
Close the miner change clock restart all is ok.
With the last version if try to change memory, core clock, voltage or other settings i need to restart my rig to be apply.
If try to run claymore at the same time with hwinfo, hashrate drop or crash.
Oc and voltage settings apllied or with command line or with overdriventool with the same result.
Other users with this issue?
|
|
|
After other some days of test for me JCE is faster than any other miner on old cards like 370 with 2 gb. Can get stable on v8 515 hs at 1150 gpu 1500 core. Also on lite, fast, v7 algo is ok. But surprising for me is on my rx 470 gpu, first step sapphire reference can get with 0.35b stable 840 hs on heavy with 1250 gpu / 1950 mem. Some time is stable at more than 900 hs but after drop at ~840. If jce solved the problem with hashrate stability was great. 470 RIG 370 RIG
|
|
|
A few hours before the release of 0.36 get stable configuration also with 0.35 on my rx card.
Example, for 580 8gb on heavy algo get stable 1035 hs with multihash 896 or 1062 with 832.
Increase value of multihash parameter get instable hashrate.
This is, test now 0.36
|
|
|
Ok, after some test:
- old card like 370 2gb work fine, best hashrate compared to other miner, constant > to 510 hs on my 370 2gb
- rx470 and similar with 4 gb ok, better than srbminer my sapphire 470 reference working at 980 without problem.
- rx580 with 8 gb HYNIX after some day of test make new bios with this strap
999000000000000022559D0052626C48A0551214BC0D460B0048C4007D0714204A8900A00200712 419123138B42D3D17
and can get good speed, tested with multihash from 1136 to 1888 with 16 increase from test to test.
But is no stable, get from 1130 hs max to 1030 to 930, average 970 hs.
With srbminer can get 1010 stable with 1250 (950mv) 2200 (900mv).
My card is sapphire pulse 580 8gb hynix, only hynix chip not model with samsung + hynix in the same board.
Look forward at a new version to make new test, congratulations to the dev.
Bye.
|
|
|
|