Fu.. kicked out in the last hours... how many different wallets are detected?
same here, pushed down just below rank 1000, so didn't received any BTX at this drop
|
|
|
Had to reinstall windows, but saved my wallet.dat as backup.dat on another drive. Is there a tutorial anywhere or instructions on how to reconstruct my wallet?
you need to change name of this file back to "wallet.dat" and place it into right folder (move wallet.dat file which is there already away, or replace it if no coins on it). Usually location is on drive C:\Users\YOU\AppData\Roaming\ BitsendPs. You can use "Search" option for keyword Bitsend
|
|
|
that's the beauty of the blockchain, not dead unless everyone turns off the wallets
true there, Flutter got healthy network as I can see it. If anyone want to get sync. fast, this is copy of chain up to actual block @1165256 , peers file included - just place it into right folder (copy your wallet.dat file before). link: https://mega.nz/#!qB8FBSLK!djhrl_bnzCOcLuzy62gIfcahj1B7BDByRheXdHRTIwY (~787MB)
|
|
|
Why this list is empty? Nobody get into it or what?
|
|
|
What's the total amount of asiacoin? And what's the money supply of asiacoin now?
ad.1. according to explorer there is 860,188,643 AC - how many is missing, lost, etc... we don't know, ( https://chainz.cryptoid.info/ac/) getinfo command is showing: "blocks" : 1669181, "moneysupply" : 860200134.31513202, ad.2. there is info on 1st page (May 04, 2014,) : PoS Specification: Interest: 100% annually, decreasing gradually to 1% within 3 years - so from May 04 2017 we should be 1% POS inflation only.
|
|
|
The 10,000 blocs were reached !!!!To celebrate that 5 yuancoins per person will be distributed to those who will put their address !!!! have a good day & all the best, my YUANC addy: YTbSU1Q3w4KSFC6uwePUUitR4dKtPU984L
|
|
|
I have same problem on both of my Macs. The blockchain only syncs to 263566 and then stalls there. Seems like a bug. Anyone make progress here?
I cannot seem to get on the right chain. I have uninstalled V3.0.0, reinstalled, deleted all HODL related files expect for the wallet, tried launch QT with -reindex, -rescan, zapwallet to no avail. Any other ideas?
as we can read here, few others people got the same problem, and can not get sync. ver.3.0.0 of client on to right chain - don't know why... I have made copy of right chain up to actual blocks : 266152 running on client as above. So you need to only place it into right folder, don't forget copy your wallet.dat file before. link: https://mega.nz/#!KUNCxKQJ!NWK5WxCuzoNVMFpl0jzVw0RZpwRxj8aRpe1JCjTHaFUps. tips welcome HODL: HRsMu8vNUi8MnG6bg9h34oUwx56soVXieW
|
|
|
About masternode - I think - need 10.000.000 coins ... This is increase number of holders and increase price of IncaKoin.
agree, voted on it 10mil. Masternode = Masterholder Less coins in circulation should make every single NKA more valuable and push price higher. Any promo campaign wouldn't hurt.
|
|
|
ah man im all over this coin game is amazing I'm buying more!!
Yes, I can see it, let us know when you stop buying.
|
|
|
Send with 500+ Sats fee per Byte and you will not have confirmation problems. I recommend to buy Byteballs. You get a higher share for Byteballs than for Bitcoin on distribution. Hodling Byteballs brings you 10% while Bitcoin brings only 6.25%. Once again I already began to prepare for next distribution by raising bitcoins in my wallet by transferring them in time to not have confirmation issue. We have 2 more weeks till 9th June. It is a friendly reminder to those who joined us lately. Make sure you have confirmed Bitcoins into wallets other than exchanges. Wallets can be linked any time later.
This coin is doing good job; looking by interest on a typical bank deposit 1,5-2% a year to interest by holding BTC 6,25% and Byteballs 10% a month. Regards to crypto holders.
|
|
|
Need download blockchain ...
Just made special for you, copy of whole chain of incakoin up to block no.1927746 (dated: Sunday 24.05.2017), peers file included. Just unzip and place into right folder... Don't forget to copy your wallet.dat file before. Run on client ver.1.4.1.0. link (1,2GB): https://mega.nz/#!OA1iVb5b!zYKSbbJxXp13xuswiSfT5OxCbomP581qH6PauJnXdQ4ps. tips welcome NKA: NUqhcPeMCiqwsQ9LJ5McTfoyQGyRyzM1Ch all the best
|
|
|
I have today start the first full nodes with Segwit support. -uacomment=UASF-Segwit-BIP148.Supporting Segwit on BTX by UASF Info about UASF here http://www.uasf.co/1. Please download Bitcore Core here: https://github.com/LIMXTEC/BitCore/releases (It isn't a new version) 2. You will be prompted to choose a directory to store the Bitcore blockchain and your wallet. Click OK to use default. And 'Allow access' if windows firewall pops up. 3. Bitcore Core will begin to download the block chain. This step will take some time. (You can stop Bitcore Core at any time by closing it; it will resume from the point where it stopped the next time you start it.) 4. Now, to signal #BIP148 (UASF) on Windows, you need to edit the shortcut properties of Bitcore Core by right clicking the application, going to Properties, and changing the Shortcut Target to: "C:\Program Files\Bitcore\Bitcore-qt.exe" -uacomment=UASF-Segwit-BIP148 https://www.reddit.com/r/Bitcoin/comments/69xkvv/understanding_bip149_redeployment_of_segwit_with/Also, Port 9333 must be open on your router otherwise your node will not be connected to by peers Windows: %APPDATA%\Bitcore\ Mac: $HOME/Library/Application Support/Bitcore/ Linux: $HOME/.bitcore/ And append the line: uacomment=UASF-SegWit-BIP148 if I see under Debug window: User Agent /BitCore:0.14.0.1(UASF-Segwit-BIP148)/ Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010) is it mean setup is correct and I am running client with it? ^^^
|
|
|
there are news to indicate hype, but other way too, nothing new in crypto. Would be fun to see news that someone takeover this project, and what happen after...
|
|
|
Everything ok in here? You guys need to go contact support on Cryptopia and ask them how you can get your ratings up. You have 0 stars and that has an impact. -Cryptopia Mod It is bit quite here indeed, bit more happening on https://twitter.com/Allion_ALL. Not easy days for alts during Bitcoin rally mode. Looks like dev. is reorganizing few things (services) here after his last statement. It would not hurt if people here help in anyway.
|
|
|
Just claimed mine. Cant wait to spend it in the future!
\ Same here, claimed and received BTX back. Process went through fast and with no issue. Lets see where this coin can go, at this stage hard to say, but compare to tones of other not so promising altcoins ... with this one I am happy to hold some.
|
|
|
"1. "proof-of-work" : 1.05937409 " - but it looks like POW is over, can not mine this coin any more, correct me if I am wrong. so we got 123799.714 CKS coins in circulation for now, and inflation is coming only by POS with percentage 25% per year.
|
|
|
Answer from the support service Yobit.net: "Deposit / withdrawal of coins will be available after updating the source code of the wallet. Unfortunately, developers are not in a hurry to send updates - Therefore, in order to avoid losing users' funds, the network is not available. If you have updated coin sources, please send us ( https://yobit.net/en/maintenance_request/ Free) and we will promptly fix the problem on the coin. Thank you for contacting our support team." submitted the form with the latest version of the code and also added a list of actives nodes let's see if the wallet is taken out of maintenance Interestingly "promptly" is how many days? Just to others know, I did a test - re download whole chain to see how it goes. Results all fine, synced with no issue in about 20h, size of chain 4,8GB (quite a lots), used client v.1.4.1.0. Cpu use about 10% during catching blocks. So if a exchange or anybody will try to get sync should not have any problems, just need to wait as it take time. If someone need copy of chain let me know, I can drop it on mega. yes please provide the blockchain as a download, a working whole chain for 1.4.1.0 would be nice to save time. here we go, whole chain of incakoin up to block no.1893179 (dated: Sunday 30.04.2017). Just unzip and place into right folder... Don't forget to copy your wallet.dat file before. link: https://mega.nz/#!qV9G2R7K!hW6YgvdjiCxOlGbLWyZmMZrSwSJKcqMrfcm2Wg-jWwI
|
|
|
You can use generatetoaddress 10000 urbitcorewalletaddress -1
The CPU usage increased indeed after this. But also no other commands work anymore in console. (e.g. getmininginfo) Is this normal?! I don't want to find myself in some odd error, just burning CPU time... Yes that is normal ...a user works on a new extern CPU Miner. Kind Regards Christian That's good news. Right now I am either very unlucky or my hashrate is just too low to solve any blocks. Also I noticed that the mining seems to stop after approx. 2h, the CPu usage drops to 0.5%, this happened now for the second time. Any chance to get my inspiration-bounty? 1Kyu9rr5eH8yEytuieRxFnnwVdYqYtpDjz PS: Will be publishing an article about this on Steemit as soon as I find the time. Very exciting project. Keep it up. I send 0.125 BTX for you. will send you some BTX after I solve block, mining on my laptop with i3 - no luck so far. So keep fingers cross for me. Maybe better to wait for extended miner or airdrop in this case.
|
|
|
|