Show Posts
|
Pages: [1] 2 »
|
install a surge suppressor between you miners and the wall outlet it stops power "noise" from traveling both directions. Not a $10 power strip, but a real surge suppressor.
|
|
|
so when will the 120GH/s units arrive? I didn't see a schedule or guess as to when that unit was to appear....
any guess on price?
NineLives, can't believe your patience and willingness in dealing with someone who is obviously litigious and juvenile.
|
|
|
So the big question that I heard from the Chairman was to the first Panel "What do you need from the legislative branch?" and all 3 panel members basically stated that they were doing fine with the tools(laws) currently on the books.
That's a huge plus for bitcoin with the apparent lack of need for more legislation.
I watched the entire presentation and I felt it went well for the bitcoin community.
|
|
|
Or buy one blade eruptor for 1.1 BTC, don't have to deal with any hubs that way either. More than double the hashrate for the same price, and no $$ wasted on hubs. Plus you can overclock them alot of guys dont have the knowhow to config or install the blades "alot" of guys must be total idiots than Easier to set a blade up than one of these USB miners I bet I have to agree completely. when I got my first blade it only took me 10 minutes to have it up and hashing for me....my USB eruptors took significantly longer!
|
|
|
BFL Gobbler!
01000010 01101001 01110100 01100011 01101111 01101001 01101110
True Independence!
Pecuniariis Libero!
|
|
|
stratum+tcp://pool.50btc.com:8332 Dead I saw this also for a couple hours mid day...but then it came back...
|
|
|
I have one of these little gems and it isn't recognized when it gets plugged in and all of the others I have work like a charm.
Was wondering if anyone had attempted any repairs on these devices and if so, what have you done and were you successful?
Thanks,
Neptune
|
|
|
yeah... how about you let new users only purchase something if they have the amount in their bitmit wallet? I guess that would be the easiest solution this is actually a good idea and you get to sit on those btcs even longer So speaking as a customer on BitMit, that would mean I would have to keep bitcoin in my BitMit wallet and that's not something I like to do. Or I would have to transfer Bitcoin twice to pay for an item. That would make using BitMit less convenient. I personally have only made purchases on BitMit, and I like how its setup and I like the process. But this is just one geeks opinion.
|
|
|
I have to agree, the .25BTC per Gh/s would be a great place to be...so about 2.5 BTC per unit
|
|
|
Put it around the $50/GH and you will have me interested.
+1 +1
|
|
|
The site is back up and working well for me...notifications and all...
|
|
|
I saw alot of 'reported' disconnects yesterday on the website UI, but my miners were working the entire time and reported no errors on my end. I viewed it as the server side being under a great deal of load and not being able to update stats fast enough....
this same thing was happening a few weeks ago then something changed and it all got better....we are going back to the not so good state with regards to stats. Don't get me wrong, this is my favorite pool and I want it to succeed, that is the only reason I'm posting what I'm seeing. I'm hoping this will help improve customer experience.
|
|
|
yep just went down completely again...they must be working on getting it squared away...I'm guessing we'll see it back soon.
|
|
|
The site responds to pings and rather quickly, Non SSL page is up and running, but as stated above...no love for Login...kinda makes it useless...
|
|
|
Actually I got 2 of the 3 miners working which is great, but the third just wont show up as anything other than "Unknown Device" and the 'Bridge' drivers won't install on that device...I've contacted the guy I bought them from and he is willing to try to get it to work and send me an alternate.
Like them so much I bought 3 more yesterday...
Thanks for the help!
|
|
|
Ok, I've tried this every way I can think... can't get the zadig drivers to install...when I plug in the AsicMiner I get an error 43...
This is the only thing that has seemed to work(but obviously doesn't) I plug in the miner, go to device manager and uninstall it, open Zadig and install the WinUSB driver, it says it installs successfully, device manager never changes and I never get a prompt to reboot...
I have installed the CP210x driver also...nothing... If I try to install the Zadig WinUSB driver without first uninstalling the default driver in Device manager, the install fails.
Anything would help at this point and a big Thanks in advance, this community always steps up!
P.S. when I install the driver from Zadig, the device disappears from the list in Zadig.
Not sure if you've gotten it working yet, but this (linked earlier in this thread, I think) got me working on 3.1.1: http://rdmsnippets.com/tag/install-block-erupter-on-windows-7/Note: don't reset them to WinUSB after installing the other drivers. Just make sure that they are listed as having COM#, and then specify the COM# in your shortcut or batch file, and you should be ok. Ya I've been every permutation of these instructions I can think of and I get the same "no go" situation... When I plug the devices(I have 3) into any USB port it is reported that there is a problem with the device and it is shut down. Error 43. I have tried this on 4 different systems and I get the same error from all 3 USB miners. The actual information when you look at the properties of the device is: "Windows has stopped this device becuase it has reported problems. (code 43)" any further assistance would be greatly appreciated!
|
|
|
Ok, I've tried this every way I can think... can't get the zadig drivers to install...when I plug in the AsicMiner I get an error 43...
This is the only thing that has seemed to work(but obviously doesn't) I plug in the miner, go to device manager and uninstall it, open Zadig and install the WinUSB driver, it says it installs successfully, device manager never changes and I never get a prompt to reboot...
I have installed the CP210x driver also...nothing... If I try to install the Zadig WinUSB driver without first uninstalling the default driver in Device manager, the install fails.
Anything would help at this point and a big Thanks in advance, this community always steps up!
P.S. when I install the driver from Zadig, the device disappears from the list in Zadig.
|
|
|
I can loose 1 btc if the diff not max so much in one week we will know and I think that the news will be bad
Dude...you and Chicken Little need to get out more...easy, a dose of ridilin and you should be good.
|
|
|
just hit the page and got the "Down for Maintenance" page...we'll see how long this lasts and if the maintenance fixes the issues...
|
|
|
everything looks back to normal now for me...hashrate back up to normal and coins earned jumped...
|
|
|
|