i installed the Butterfly Labs software, and this is what i'm getting when i run it:

Starting miner...
33] Started bfgminer 4.4.0
 [2014-07-12 21:21:33] No devices detected!
 [2014-07-12 21:21:33] Waiting for devices; press 'M+' to add, or 'Q' to quit
 [2014-07-12 21:21:33] Probing for an alive pool
 [2014-07-12 21:21:33] Testing pool http://us2.eclipsemc.com:3333
 [2014-07-12 21:21:33] HTTP request failed: Empty reply from server
 [2014-07-12 21:21:34] HTTP request failed: Empty reply from server
 [2014-07-12 21:21:35] Stratum authorisation success for pool 0
 [2014-07-12 21:21:35] Pool 0 http://us2.eclipsemc.com:3333 alive
 [2014-07-12 21:21:35] Network difficulty changed to 17.3G (124.1P)
 [2014-07-12 21:21:35] New block: ...1d30ec2e #310478 diff 17.3G (124.1P)
 [2014-07-12 21:21:35] Stratum from pool 0 detected new block
 [2014-07-12 21:21:36] API running in IP access mode on port 4028
 [2014-07-12 21:21:56] 20s:  0.0 avg:  0.0 u:  0.0  h/s | A:0 R:0+0(none) HW:0/none
 [2014-07-12 21:22:16] 20s:  0.0 avg:  0.0 u:  0.0  h/s | A:0 R:0+0(none) HW:0/none
 [2014-07-12 21:22:36] 20s:  0.0 avg:  0.0 u:  0.0  h/s | A:0 R:0+0(none) HW:0/none
 [2014-07-12 21:22:56] 20s:  0.0 avg:  0.0 u:  0.0  h/s | A:0 R:0+0(none) HW:0/none


here is my pool information:

-o us2.eclipsemc.com:3333 -u rypert.worker -p 123qweasdzxc

windows recognized the Bitforce miner and everything seems to be fine, yet it'snot mining anyways.

Can someone please help. THanks in advance!!!!!

Hello guys, i need some help, i got the Butterfly Labs 60 GH BitForce miner, i connected it to EVGA Supernova 750 power supply (only 1 miner connected to the PSU) and then connected the USB from the miner into the hub where i have some Antminers U2. After some stuggle i was able to install the drivers, so i can see the miner in the device manager, however it has no port assigned to it. When i start the BFGMiner, it start all the ants that i have, but does not see the BitForce...

Can you please guide me in the direction on how to make the miner work. I'm very deperate to see the miner at work.

THank you in advance.

i'm not overclocking the moners, i dont want to overheat them... this rig is a test, i'm waiting for my 4 Butterfly Lab 60 GHs units to come in anytime now. will leave this at no pool lottery ))))

thanks for the advoce, it fixed what i wanted to fix.

appreciate your help!!!!

this is what i see on my screen, at this moment i run 2 Antminers U2 and 2 regular erupters, but it shows me the first 3 ports and then when i press the "down key" i see statistic for the 4th erupter, but it's not on the main list, seems like i have a limitation of 3 devices showing in the window. is there a way to make it show me all the devices i have running?

http://i859.photobucket.com/albums/ab154/zarkhd/bfgminer_zps9f3ea5ea.png

i'm running BFGminer on Windows and it's not letting me make the owndow bigger, it's the set size... is that something i can change?

Please help, i have 2 more hubs coming to me tomorrow, and i'd like to cennect more miners, but it's annoying not to see them all running.

Thanks in advance!!!

Hello, my BFGMiner is only showing the 3 erupters out of 4 that i'm running, meaning the main page when i close all the options, however when i press up and down buttons it shows me that the 4th miner is active, is there a command that i can put in to show all the running devices on the main page of the BFGMiner?

THanks in advance