Nice coin!

I think is the lowest power consumption relative to what you earn in USD, (with a little tweaks to reduce power used by graphic card).

https://i.postimg.cc/vmKT5CSh/Quantus.jpg

Hello!

I'm using last wallet version 2.10, I have staked 2000000 coins, staking is working, but alwayd get errors like "replacement fee too low", when I want to send coins or even when "claiming rewards".

https://i.postimg.cc/c44nqxp3/OGGW.jpg

I don't know where or how o increase replacement fee, or more gass, please help.

Thank you.

Exactly, U're perfectly right!

I quited mining on own node, I will go to suprnova, but in next couple days.

50GB is ok, but I was scared of about 16GB per day increasing, and I thought, this increase will be daily.  

Now, I run 1.5.5. node, today when I left to work (11 hours ago), keryx-labs folder was around 21GB size and now (after 11 hours) is 40.3GB.

I leave it working untill tomorrow morning to see what's happening, and if it doubles again in size, the only way is it to wait Baikal Mine to open again (even solo mode only), SuprNova have their KeryX Miner Supr (proprietary), wich cause alot and alot of well known troubles to rigs with more than 2 different graphic cards (Nvidia only, like mine) with 8 and 12 and 16GB.

As I saw until now, KERYX project, isn't mature at all, and if they continue once at 2-3 days to fork, or other troubles as until now, I prefear to mine other coin like BC3, or PRL, more stable.
I don't like to leave rig working overnight, and when I woke up in the morning, pool is dead since 6-8 hours ago (lost time, wasted energy).

I always use "pause" at the end of .bat file, especiallly when I test something.

Officially, this is a testing PC rig.
Main rig was working on KRX on SuprNova or Baikal pools, but in the last period of time, both pools are delaying to work, or are in maintenance since forks or other KeryX network troubles.

As I don't know any other pool for KRX coin, (except SuprNova and Baikal), I decided to run my own node and put the main rig on it (in the future), instead to wait main pools to get working again, delayed payments, etc.
So, for the moment I moved main rig to other coin, and testing node and functionality with this PC rig.

When network will be stable again and no stops daily or once at 2 days, I will decide if I go back to pools, mine other coin (PRL), or work KRX in own node.

Disadvantage of running local node, is big GB used on storage, from yesterday since my last post until today, C partition grows fron 33GB to 49GB...
I don't know if there's any option to run local node with less storage needed (as some wallets that store last 2GB of data, instead hundreds of GB).


If you know that and 'wanna share it, to try myself, I much appreciate!
Thank you for all answers and help!

It was pause too, to the .bat file, but I ommited to write here, my blame.


I think, finally I did it .

keryx-miner --keryxd-address grpc://127.0.0.1:22110 --mining-address keryx:qz3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

It not accepts anything after miner address like    ".rig name"    or  "--worker-name rig1"

Always re-asking to authorise miner escrow key  if I use classic  "keryx:qz3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.rig name",

or give one error (command unknown --worker) if use "keryx:qz3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx --worker-name rig1" ...

So, I left as above, it works even with    "grpc://127.0.0.1:22110"  or simple, "127.0.0.1:22110"





Thank's for advice.

I forgot how to do .bat file for mining KRX on local node.

I did succesfully local node, synced, but unsucced to create .bat file.
Example I used, and no working

keryx-miner --keryxd-address stratum+tcp://127.0.0.1:22111 --mining-address keryx:qz3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.rig name

The bold part, please someone help?

Thank you but is way too complicate for windows users.
I don't understand why they launch such kind of projects without being all complete, wallets, miners, pools (for windows users)...

Again, T.Y, for your answers!

Hello sir, for Windows users, anything about wallet and miner for TSC?
Thank you!

This printscreen is after fork with SRB 3.5.1.
With yellow, I wrote what was BEFORE fork with SRB 3.4.8

https://i.postimg.cc/63HCPP80/SRB-3-3-1.jpg



Now, 4-5Watts more consumption for each card and less 4MH less for each card.

I think is acceptable.

Me too confirm that, RTX4070Ti previouus 165TH vs now, 153TH.

Is passed some time since this coin is changed to POS from POW. I hope all coins wich changes from POW to POS (first use miners for growning then dump out miners, for whales companies) TO FAIL ! All of them!

Almost like nicehash couple years ago ...
Stolen from "cold wallet", means almost 100%, inside job.

Miner was re-flashed with official firmware, no logs saved, unfortunately.

I tried deja last version (v9), I'm speaking about it, on post above.

It doesn't finish loading DAG file, stays at 100% even for one hour, instead max 10 minutes for ETC.

Doesn't work on ETHW, it stays on 100% DAG file, first time I let him 30 minutes, then I restarted it, second time is the printscreen.
Later I will rollback to original firmware, now, I'm at work.

https://i.postimg.cc/kgJ1by46/Untitled.jpg

Hi, tried the 12% developer fee, on my X16-Q, it says wrong version.

Thank you!

I didn't know about maintenance they put "maintenance" message, later.

I just know 2 pools, Baikal and Suprnova. On Suprnova, reward is ok, but is dead from couple hours ago.

On Baikal, reward is worse, almost 30% lower earnings than Suprnova with same hardware on same time duration. Any known pools other that those 2? On google, nothing... Thank you!

Hi, anyone knows what's happpened, why reward dropped so much? Couple days ago, I earned 1000 KRX in around 24 hours, today, with same graphic card and same hashrate, it takes 2 days to earn 1000KRX...

That's on baikal pool. I will try in suprnova too, tonight.