hello everyone, several blocks found in our pool but unfortunately not our team.

 arf we’re going to get there!

 

Good evening, I didn't know that other people could mine on the pool with their own BTC address, sorry for the inconvenience.

strange anyway, my address for mine is the same, yet I am well seen on your pool.

ok, that means that someone is mining on our pool, but with their address not ours. ok understood, sorry


PS : I reboot my PI Zero Wh (too many software errors) despite a good Hashrate.

hello not Today  it s 04/02/2024 block found block 828884





look on picture .

check anyway, after that I could be wrong but hey. even on the forum I saw it too.

hello everyone,

I have just seen that a block has been found on the pool (I am attaching a screen copy)

if this is the case, I have not received anything in relation to the sharing which is planned...........



my 3 gekko science keys (bitcoin merch Mars Lander) are connected 24/7 ( 967 GH/s actual )

hello everyone,

for the compacf gekko science the frequency for me is 480 MH/z (originally 460 on the cgminer 4.12.1 software)

your gekko-compacf-freq 380.

my setting is 480 already increased to 500. depending on the key model it is necessary to mount in steps of 5 MH/z until it becomes unstable or the frequency is placed on a frequency below what was set.




my parameter on picture.

on the other hand, the higher the frequency, the more ventilation is required (it heats up enormously at more than 500 MH/z)
the higher the frequency, the more Current is required on the USB part (example for 460 1.6 to 1.8 A on 5.2 V // for 480 2 to 2.2 A on 5.2 V //
 for the max (350 gh/s you need 5 A per USB port)
be careful not all usb hubs provide this Amperage (my usb hub blocks at 2.4 A under 5.2 V) my usb hub is powered by 12 V for 10 A (120 W)

hello everyone, I post my BTC address (deposit): bc1qxxj4yq83s6gqsxscxvfmp5w6rzu9aqlt05hnwh.
I think I'm the second to give it. I wish us good luck in finding a Block.

I have a question: has a Block already been found by a miner?

hello thanks for help ( for picture )



950 GH/s currently, live monitoring via web interface (ip address)



my usb keys also have another name: compact F 1397 asic chip (350 GH/s per key) provided they have 3 Amperes under 5 Volts. my keys are under 480 MH/z in terms of internal frequency from 490MH/z it becomes unstable because of not enough current. my usb hub supplied 12V for 10 A: supplied under 5.2 V 2.4 A *16 port. the hub is used to power the PI ZERO WH + all the fans. everything works perfectly without problems!

I have a picture, but I don't know how to publish it (the picture is on my PC).

thank you for your return, I have correctly put the BTC address provided (I currently provide 941 GH/s) it is necessary to leave a few hours for stability (GH/s)

hello, I am new, I have just acquired: mars lander (bitcoin merch) with 3 gekko science key (BM 1397)

I should provide between 925 and 960 GH/s.

I will have a question, as I participate if there is a gain (I would see it on the PI zero Wh which manages the mining software has an oled)

how I would be paid, because the mining address is that of our team (I have a personal BTC address). Thank you for your answers .