Latest posts of: jackbox

Quote from: MCDMCDMCD on August 14, 2017, 03:03:28 AM

Quote from: ChironRegera on August 14, 2017, 02:38:27 AM

Can one of the developers please explain how Signatum's full Proof of Stake system will work after the 100,000th block? So if we currently have our coins stored on Signatum wallet, after the 100,000th block, will we have the choice to move them into the "stake" category and earn 5% of staked coins? Thanks.

I'm also curious to know (and excuse this if there's an obvious answer), but where does the 5% 'interest' on staked coins come from at this point, if no new coins are being mined?

Thanks.

Usually your wallet creates the block when it gets the stake reward and creates new coins.

Quote from: wilmeran on August 14, 2017, 12:24:29 AM

Regards, I am putting together a new Rig Ethereum and this one I have five GPUs are all Gigabyte GTX1060 (3GB), the strange thing is that two of them are an old order (REV.1.0) and the rest are from a new order (REV. 2.0).
Curiously, the old mines up to 25MH/s, and the other 3 new mines only 19MH/s with the same parameters of Afterbuner and the same conditions.

Any help on the topic ??

Does the one hashing faster have Samsung RAM and the others Hynix or another brand. I have all new GTX 1060 cards from various manufacturers. The ones with Samsung RAM all has 22+ (most close to 25 if can handle the overclocking) while the ones with Hynix RAM linger around 18 with no way to seemingly push them faster.

Quote from: Nixeus on August 10, 2017, 03:31:10 PM

Hello guys,

I would like to mine a few DGB with my pc.
With my CPU (i7) and my graphical card cuda.

CCMiner allow only to mine with Cuda.
Is there any tool compatible with both like Nheqminer ?

Any best pool to use ?

Thanks

CPU mining is useless and a waste of power. I used to mine DGB Qubit with my CPU but it would be a waste of time now.

Quote from: Nixeus on August 10, 2017, 03:24:55 PM

Do you think one day it will be able to reach 10$ ?

Any coin can reach any value, but who the hell knows? I would be happy if it went to $1.00 in value.

Quote from: crypticj on August 09, 2017, 04:27:54 AM

Quote from: jackbox on August 09, 2017, 02:14:43 AM

Quote from: garytheasshole on August 09, 2017, 01:55:52 AM

Lets start a hedge fund to raise the satoshis needed for sane tx fees.

If someone spends one of the outputs with reasonable fees then the Nicehash tx will have to be mined for the miner to mine the new tx with unconfirmed input to get the tx fee. I think the only way these txs will get mined within a reasonable time. The mempool is large and a tx with this low a fee will not be mined in the forseeable future.

it was mined few hours ago...

Not all of the txs were mined yet. They only send about 30 to 40 payments per tx. Lucky if yours was mined already.

Quote from: garytheasshole on August 09, 2017, 01:55:52 AM

Lets start a hedge fund to raise the satoshis needed for sane tx fees.

Hey Nicehash, what is this crap? You sent out miner payments with a ridiculously low fee of 5.993 sat/B. Payment pending over five hours plus without being mined. Great way to treat the people that make you money. 101 sats/B should be considered minimum fee. You charge us 4% to send our money and then pull this kind of cheap ass crap.

My coins have been stuck in auto-exchange for over two weeks. It is not a large amount but it should not be doing this. I have tried emailing support but they do not reply. Someone from MPH please address this issue and fix it asap.

Quote from: vatusasid on August 05, 2017, 03:41:17 PM

Quote from: fr4nkthetank on August 05, 2017, 01:29:04 PM

Just buy a Gold EVGA PSU, warranty 5 years or more. Run it 90% its less efficient though - you are losing maybe 5% efficiency - but it won't explode. I have a PSU with 10 year warranty, another 7 years, most are 5...So if they pop well, that sucks because of downtime, but I get a replacement. Only buy high quality PSU. check johny guru. even evga has PSU's I wouldnt buy.

That is right. I also just use Platinum PSU now.

Corsair HX1000i (platinum) or RM1000i (gold). Good, strong PSUs that you can run up to full rated power and can run program to see power usage and efficiency.

Quote from: jkminkov on August 03, 2017, 02:56:01 PM

can you add bcc to autoexchange?

I have had three different coins stuck in autoexchange for over two weeks. Nobody at MPH replies to my emails for help. Why would you want to attempt autoexchange and have stuck coins?

Quote from: S.N.U.F.F. on August 03, 2017, 01:10:20 PM

Guys, why all my cards(470,480,570) lost in hashrate about 10% ? I think it began slowing few month ago. There some problems with dag file or it's same as with old cards(7950) ? Is it possible to get prewious speeds?

Every new DAG hashrates go down until new driver is released.

Quote from: cdrx on August 03, 2017, 11:28:36 AM

- If I have 4 cards and want to enable first 3 only in 1 claymore instance do I need to add: -di 012 or -di 02 ?

- If I want to open another instance of claymore to mine other coin (not dual) for the 4th card do I need to enter in the other claymore: -di 3 or else?

Thanks for help.

First instance, -di 012
Second instance -di 3

:-D

Quote from: Luisjc69 on August 01, 2017, 04:10:37 PM

hello guys,

with claymore 9.8 can also mining BCC (Cash!) ?

Or which kind of software we need for mining Bitcoincash??

Thank you

Luisa

No. You need ASIC hardware the same as Bitcoin at this time.

Quote from: Saidmod on July 30, 2017, 07:01:14 AM

How about now i've heard that Ethereum is planning to switch into pos to pow ? If that happens can we still continue to mine ETH?

Nope. POS doesn't involve mining. You can mine other Ethash coins that remain POW.

Quote from: Edward_Teach on July 30, 2017, 02:47:39 AM

Quote from: Larz952002 on July 30, 2017, 12:49:46 AM

I am also getting hit with Dev fees pretty frequently. I think it collects a DEV fee per card but I did see it hit GPU 2 twice in 30 seconds. Maybe the DEV has some input on this

I got hit 10 times in 4 minutes. I thought that was a little excessive.

If the fees are that excessive add the"--fee 0" option to remove dev fees.

Quote from: P00P135 on July 28, 2017, 02:26:02 PM

Quote from: letuandnvn on July 28, 2017, 12:11:46 PM

If you suspect the POOL have you tried to ask this question to them?
Do you see a "Dev Fee" during the time of those "hacks" ?
Please provide screenshots.

Sorry, I have got mistake, I downloaded Claymore v9.7 from this web:

http://worldvision.vn/U1/huong-dan-su-dung-tool-cay-coins_c93/huong-dan-va-dowload-tool-cay-coin-claymore-ethereum-9-7--eth--all-phien-ban_c215.htm

And unfortunately, they already modified dpool.txt and epool.txt to lead the pool to their wallet without any announcement to user.

I've replaced that one with pool which downloaded from bitcointalk.org. I think everything will be fine.

Well that is what you get for downloading a miner from an unknown source. Tongue

[/quote]

Your mistake. You should ONLY download Claymore miner from the official links in the first post of this thread. Any other links can be modified code with malware, spyware, etc. inserted.

Quote from: chocobo_rider on July 28, 2017, 12:54:50 AM

@miningpoolhub is autoexchange working? i have many coins "credited for autoexchange" for at least one week. I have autoexchange set to Ethereum, and the stuck coins are:

Dash
Digibyte-Qubit
Expanse
Globalboosty
Maxcoin
Monero

Thank you in advance for your help. My USER ID is 56735

Me too. I have had coins stuck for over a week.

Ethereum
Maxcoin
Zclassic

Quote from: baga105 on July 26, 2017, 02:06:16 PM

Any recomendations on Core/memory for KFA2 Gtx 1060 3 gb for Equihash coins?

Each card is unique and different and even the same models from the same manufacturer will vary slightly. I have the Galax version of this board. It is exactly the same as yours as KFA2 is the European brand of Galax. Mine is at core +100, memory +500. Any faster on either and the card stops mining or crashes. I also have a Gigabyte brand GTX 1060 3GB and I cannot go over +400 on memory or it has issues.

Quote from: TechPark on July 25, 2017, 01:11:56 PM

Quote from: MinerosYV on July 24, 2017, 10:43:18 PM

Quote from: z0n0 on July 24, 2017, 09:28:54 AM

Any1 running rig with multiple GPUs on old lga775 boards?

Every time I plug riser into pcie x16 slot, the system won't start.
What could be the reason for that?
when pluged only pcie x1 works normal.
I tried changing video setting in bios (onboard, pcie...)

I have a Vostro 230 775 mobo with a 500 watts PSU running a couple of RX 480 8 GB with Ver 6 raisers, did have to update the bios for it to work.
Strangely enough have a Vostro 260 with a 1151 board and a i3 on it, as soon as I plug a 480 in to the mobo the computer wont even boot, not even updating the bios

Go figures

its known issue - that mb does not have uefi bios which is required for polaris and other new gps

I have older, non-UEFI bios motherboards and polaris gpus work fine. Check the bios and make sure your PCI-E slots are set to Gen1, not Gen 2. But having said that, some motherboards are simply not compatible for multiple GPUs. There were simply not designed for it in the bios and unless you can update to a more up to date bios that will support multiple GPUs you might not be able to use that motherboard.

Quote from: shadow1975 on July 23, 2017, 02:15:41 PM

I have problem with Claymore miner. With 3 GPU GTX 1070 8GB everything is OK and stable. When I add 4th GPU GTX 1070 8GB, miner starts to restart itself and giving me error CUDA ERROR 11 - CANNOT WRITE BUFFER FOR DAG. First I thought it's GPU fault and put new one with 2 old one and everthing is OK. Every combination of 3 GPUs is working, except when I add 4th one.

I increased virtual memory to 16GB and checked free disk space (71,6 GB).
I'm running on Windows 7 64-bit, with 4GB memory.

Could be problem in RAM or disk space ?

Please, for solutions, beacuse it's very little about this error on net.

You need to update to Windows 10 Creator's Editon for Claymore to work properly in Windows.