Question:
Is it possible to make search specific spaces in the priv-key? Like shown below in X:
00000000000000000000000000000XXXXXXXX000000000000000000000000000
Yes this is done by using -stride option Yes, i got it but could not figure out how can i correctly mark the start-end points. Can you give me the stride setting for this example? This will help me. Your sample is 64 length so i assumed it is hex privatekey format. On this basis the start, end and stride for the key search will be.... start = 0x00000000000000000000000000000000000 end = 0xFFFFFFFF000000000000000000000000000 stride = 0x1000000000000000000000000000 I think you will modify it accordingly to fill your 0 values in start and end..but no need to change anything in stride. Thank you
|
|
|
Question:
Is it possible to make search specific spaces in the priv-key? Like shown below in X:
00000000000000000000000000000XXXXXXXX000000000000000000000000000
Yes this is done by using -stride option Yes, i got it but could not figure out how can i correctly mark the start-end points. Can you give me the stride setting for this example? This will help me.
|
|
|
Question:
Is it possible to make search specific spaces in the priv-key? Like shown below in X:
00000000000000000000000000000XXXXXXXX000000000000000000000000000
|
|
|
That will be nothing wrong until you reach and use with 90c all the time. Also, the main problem is not the GPU temprature; it is VRM. Do not trust 60 degrees. Check your VRM temps. 79 Degrees at 99%
Edit:
The above was "off the shelf" settings.
Using the fan curve feature in MSI Afterburner I set the GPU fan speed curve to max the GPU fans out @ 70 degrees.
With this new temp curve in place I can maintain a temperature of 70 degrees (+/- 2) while @ 3,400 Mkeys/s but the card alone is consuming about 435Watt
2nd Edit
After removing the glass side from my PC case leaving the chassis open with a small external fan blowing into the case the card runs @ 3,422 Mkeys/s while maintaining 60 degrees (+/- 1).
The manufacturers documentation for my case states the case should be closed to maintain correct air flow however all temperature readings on the system suggest otherwise, the entire system is running much cooler, the GPU 20 degrees less on average.
So the FINAL answer to the original question is
The Zotac RTX 4090 running Bitcrack2 can process 3,422 Mkeys/s while maintaining 60 degrees with a fan speed floating between 65 to 68%.
|
|
|
I don't want to be offensive BUT why a person will pay 0.28 BTC for an unknown software will place in your car's ECU? Also even it's legitimate you need to charge your 180W battery for at least 280 times for ROI.
This looks so suspicious...
|
|
|
Hello guys, I have some domains which are related with Bitcoin / Altcoin. I can accept Bitcoin / Litecoin / Doge / Shib for payments. +-5$ is OK due to market volatility on payments. Process is straigtforward. Once i get the payment, buyer will get the transfer code. All domains are hosted in Porkbun. If you want rapid transfer, you may need a Porkbun account, otherwise you will need to wait ICANN timeline. Domains: bitcoinfaucetdirectory.com - 200$ usdbtc.info - 50$ altcoinvalue.info - 200$ valueofbitcoin.info - 500$ All sales will be shared under this topic for public clarity. Cheers
|
|
|
Site & domain is still on sale.
|
|
|
qq= Which version of Cubitcrack are you using for 3xxx Nvidia? GeForce RTX 3060 Laptop GPU
cuBitCrack.exe
-b 64 -t 512 -p 1024 564.09 MKey/s [00:00:32]
-b 96 -t 128 -p 1024 605.41 MKey/s [00:00:30]
-b 128 -t 256 -p 1024 666.64 MKey/s [00:00:27]
-b 82 -t 256 -p 2096 704.18 MKey/s [00:00:25]
clBitCrack.exe
-b 128 -t 256 -p 1024 613.69 MKey/s [00:00:29]
-b 128 -t 256 -p 756 609.83 MKey/s [00:00:29]
-b 128 -t 256 -p 1024 618.68 MKey/s [00:00:29]
-b 82 -t 256 -p 2096 620.38 MKey/s [00:00:29]
|
|
|
Still on sale
|
|
|
If you had a quantum computer, you could decipher anything and steal all the cryptocurrency...
lol
|
|
|
Anyone can compile for latest CUDA? So we can use with new RTX cards. Thanks!
If you meant putting something like this in the Makefile: -arch=sm_35 \ -gencode=arch=compute_35,code=sm_35 \ -gencode=arch=compute_50,code=sm_50 \ -gencode=arch=compute_52,code=sm_52 \ -gencode=arch=compute_60,code=sm_60 \ -gencode=arch=compute_61,code=sm_61 \ -gencode=arch=compute_70,code=sm_70 \ -gencode=arch=compute_75,code=sm_75 \ -gencode=arch=compute_80,code=sm_80 \ -gencode=arch=compute_86,code=sm_86 \ Which compiles for all GPUs supported by CUDA 11.2, it turns out that it's taking a long time to build cuBitCrack - It's already been 20 minutes. Edit: scratch that, the compile job finished the second I posted this It stands at 7.5MB large, not bad for a fatbinary with nine different arch versions in it. However this also gives me the misaligned address error on my T4, but now that I have it here I can finally diagnose it. Great! Waiting your results with excitement
|
|
|
Hello guys, I'm selling the website BTCDir.net as it's getting harder to manage the site due to my work every day. Buyer will get the full site with site & database files, also will have the twitter account @btcdir. Price = 0.1 BTC Method = Escrow from BitcoinTalk only Buyer must be an old member with good trust even we are going to use escrow. I don't want to deal with stupid things.Just send me PM if you are interested. Cheers
|
|
|
Anyone can compile for latest CUDA? So we can use with new RTX cards. Thanks!
|
|
|
Hey guys, Can i hire anyone for $80 to help me with getting this easily loaded onto Vast.ai instances Basically i want to try two things: 1) load a list of passwords and check it against another file containing addresses 2) Generate random public wallets and check them against a database for a match (which im guessing is what bitcrack does)?
Am i correct that since this uses CUDA it processes up to 1 million or more passwords per second? I'm only trying this with abandoned wallets. I'm in serious debt in about a month and this is my last ditch effort (i know the odds)
Thank you
You don't have any chance actually. I'm trying this with 21 million wallets & 450million keys per seconds. Nothing found for more than 2 months. (Everyday 15 minutes of testing). I'm not trying for dump someone's wallet, i just want to see it's possible to crack a SHA256 with Bruteforce.
|
|
|
i don't really believe in those brute-force methods, then you should have a dictionary that contains that combination, i don't think anyone in the world has anything like it, and if you want to get started with that then you have a super computer necessary, that is sometimes calculated, it takes decades to be able to crack something like this and by the time you have cracked it, the owner already has a new wallet that seems impossible to me
It is just luck. Everyday i give 15-20 minutes to try, so it's like lottery and the bonus is: it's free to join However i tried the software with one of my empty wallet which i know the private key, i set the start point near of the private key and it successfully found it. It works and i like the thrill to try everyday.
|
|
|
The hCaptcha doesn't work for me, I solve it correctly but it always comes out "try again" indefinitely, good luck with the nice faucet.
If you can't pass, there should be problem with your traffic source. Check it please mate.
|
|
|
One of the best looking faucets I've seen in a long time - good work!
Two points to mention:
The payout is low - would be good to raise this when you can. Shame you have to sign up and log in to claim.
Just my thoughts though!
Thanks for the feedback. Payout cannot get more unless i have enough traffic. I can't even get 7 satoshis per visit right now (lol) Sign up is a must, otherwise the faucet will be emptied with attacks. Cheers
|
|
|
BitCrack should be ported for ASIC miners. That will change the game.
|
|
|
Hello everyone, I've just created my new faucet uses faucetpay: https://bitcoinfaucet.linkThe reward is not much for now, but it will be higher after i agree with more ad networks. Thanks
|
|
|
Thanks mate! I've checked the site with Pingdom and got a B grade. The directory script is very light and simple which makes things extremely fast "if" there is no ad scripts Very few quality ad networks approved the site due to it's related with crypto; so i had to use lot of multiple scripts to cover hosting. Time to time ad networks really kicks the website's ass. It's unfortunate but i have no option for now. I've dedicated this website to all Bitcoin community; so i keep the site updated everyday with checking requests and add some minor things. Also, as i promised from the day1 it's free and will be free forever. Just waiting a little support from community with participate to directory, that's all! More participation means more visitors, better search engine return and then i can use good ad networks. slow page loading is not good for ranking. Did you ever try to add Google AdSense on your page? when you already have to have ads, why not them, they have the best payout still. What is your server requirements, and how much cost you, if it is not a problem to write? maybe I can help you a little. Thanks for your understanding and want to help. I can afford server requirements for now. But it's cool to have guys like you Adsense directly block your account if you even intend to add your Bitcoin related website to their systems. I had this opportunity
|
|
|
|