|
Zoek naar ASIC hosting in Nederland.
Welke kunnen jullie me aanraden.
Op het vlak van €/KwH en service.
Mvg
|
|
|
|
|
I actually have made it to work on 4G. The problem is now after a limited time, it doesnt work anymore. WOL always work in my local network. But wake on wan only works for 15 minutes after shutdown. Then ip gets flushed or something....
I read u needed to add a static ARP entry, so with netsh i made the ip static in the ARP table
But its still not working after 15 minutes
any advice ?
|
|
|
|
|
Here's what I've already done:
1) Forwarded ports 9 on my router. Both TCP and UDP
2) Set Windows to allow the computer to be woken up
3) Enabled Wake on Lan in my BIOS/UEFI
4) I'm using a wired connection
5) I've made a static IP aswell.
So WOL works in my own network, using WiFi, but i need to work on 4G aswell.
In the app i use -->
1 Hostname --> Hostname of my PC
2 Ip adress ---> Lan IP of my computer
3 MAC Adress of my computer
4 Using port 9 --> Where i forwarded port 9 on my static IP adress of my computer
5 Then i check off Public IP and fill in the WAN ip of my router.
Am i missing something i forget to do ?
|
|
|
|
|
Can anybody confirm NVIDIA inspector is incompitable with P106-100 CARDS ?
|
|
|
|
|
Latest NVIDIA relive drivers....for 1060 GPU's
|
|
|
|
|
I've changed it. Now Phoenix miner says no available GPUs for mining ....
And have a "Code 43" in Device manager...
|
|
|
|
|
I have a GTX1060 6GB rig that I use with Nvidia profile Inspector because I can run it at only ~440watt.
I have a P106-100 rig now, but when I run the .bat file, nothing happens. I get the same hashrate.
I'm running with AB at ~500w. I know you can shave off 10w per card with inspector.
Are these cards incompatable with Nvidia inspector ?
|
|
|
|
|
Yeh but 5 cards are pretty identical. Except one card that mines 20w lower. That's a big difference tho ..
|
|
|
|
|
Windows 10
6 x RX470 4GB
Latest AMD driver.
Settings on Wattman are
Memclock 2000 - 900 mV
Coreclock 1050 - 900 mV
When I check GPU-z for my watt consumption.
I have one card : VDDC 50W & VDDCI 30W 0,89 mV.
And the other 5 cards are all VDDC 60W & VDDCI 40W 0,88mV
Why are 5 cards consuming 20 watts more per card ?? But shows lower undervolt ? ...
|
|
|
|
|
Yeh did a DDU. And re installed
Solved !
|
|
|
|
This is a screenshot of my logfile, it seems it detects 2 GPU's per SLOT.
So i need to adjust my pagefile … then it automaticly shuts down  |
|
|
|
|
Just build a six GPU rig.
But when I run start.bat
The program try s to load 12 gpu's.
And then shuts down, because of the pagefile.
|
|
|
|
Yes thats my card, already checked for BIOS in their database, and they haven't gotten my card. They have https://www.techpowerup.com/vgabios/188078/powercolor-rx470-4096-161005 But thats with different core clock Getting 28.8 Mh/s atm, with 1050/2000/900 mV Anything over 2000, and i'm loosing hashrate. But my core/memory is modded in the bios. Thats why i want to try to mod a original BIOS and see if i can get over 2000.... |
|
|
|
This is how my Timings look, it looks like they were already modded .....
But my timings look abnormal, instead of the usual 1500-1625-1750 ....
 Shoud i keep this mod or use a better one ...... because i think i should get 30 Mh/s out of these cards ?
I had one card out of the six, that was running at only 24 OC'd... so i thaught this one wasn't modded.
And i think it hasn't... but those timings are weird to ....  |
|
|
|
|
I mine ETH, I tried SRB on one RX470 8GB and got 0,4 MH/s less then with PBE...
I'll try your strap, it's for 1500-1625-1750 and 2000 ?
When I install the latest driver, I have to use the patch so it seems, they are already modded. I don't have the original BIOS to mod unfortunately. What should I do ?
Getting 28,15 1950/1050 900mV
|
|
|
|
|
I use PBE on my other GPU's
Model is in the title .... its samsung memory ....
I get lower hashrate with SRB then if i copy 1500 timings with PBE
Just wondering if i need to do the same with these cards ... thats all ...
|
|
|
|
|
Don't want to mess up my cards, anybody that can verify the
1500 mem timing copy to
1625 - 1750 - 2000 will work ?
|
|
|
|
|
Okay, thanks !
EDIT: So tried it on another 470 in a rig
And I'm getting 0,4 MH less, then with the 1500 memory copying ....
|
|
|
|
|
But the other exact one is, normal and very quiet ....
|
|
|
|
|
Show Posts
