|
Having same problem again. I'm starting to think this is a hardware problem. When i swapped the second gpu to the first position. The same thing happened.
So not a GPU problem.
Suggestions guys?
|
|
|
|
|
OMG! So i actualy see in BIOS its a H110 version.
I only got a bill for mining rig level 5 and if you check online it says its a H81....
So ..... what the F
aND f23a is my latest BIOS
I was about to flash 1.2 on this MOBO
|
|
|
|
|
I enable 4g coding and it worked, all my devices run normal except one still runs at a lower hashrate. yesterday i managed to higher the virutual memory and it worked. But not this time.
|
|
|
|
|
The reason i want to use the onboard gpu, is because the fan is screwed on the frame, so i can't acces the HDMI port of the GPU's. Without unscrewing the fan.
I enabled onboard gpu, and it works. I'm now on my onboard GPU card. I wanted to use this one, in order to check if i'm losing hashrate with the flatscreen connected to it.
But still having lower hashrate on GPU0 like usual.
I already tried to do a DDU 5-6 times, and installed different drivers for it. I'm using the blockchain amd driver as of now.
My BIOS version i looked up in BIOS.
And it said F23A 06/2017
But the GUI looks different then when i bought the rig. The screen isn't scaled to the monitor and the colour is red. It was blue when i bought it....
I did saw Mining mode wasn't enabled ... don't know what this does ?
|
|
|
|
|
I enabled 4g coding, and all my GPU's work again, except i'm still having GPU0 hashing at a lower hashrate FML, the other 5 are normal rates
Maybe because i have a flatscreen connecting to it atm...
Thats why i want to use the integrated Intell gpu, but it isn't shown in device manager.
In Bios settings its set as "Auto", i'm afraid if i enable the integrated gpu i won't be able to log in and just have a black screen.
Even if the driver isn't installed i should be able to see it in device manager right ?
|
|
|
|
|
Yeh thats very confusing, since my BIOS date is from 2017, and is not even displayed in first and R2 versions.
Does anybody know why i can't see my integrated intell GPU anymore in device manager.
In BIOS is set to Auto, i'm afraid if i set it to Enabled, and hook up to it, i won't be able to log in anymore and just have a black screen .....
Or should i try this? Even with it set to Auto, i should be able to see it connected in device manager right ?
|
|
|
|
|
I don't think that Motherboard was even released in 2014, i think this should be 2017 if i'm not mistaken.
|
|
|
|
|
Can anybody help me with this problem.
So i did a MOBO reset on it. After i clickded "load optimized defaults" i had some problems booting it.
But now, i can't see my integrated GPU in device manager anymore.
I have to start up with a HDMI to one of my RX580's.
After i installed my AMD drivers, i only had 3 working in device manager, i ran the pixel patcher and there are 4 now.
So i'm getting "Code 12" not enough resources available. on 2 of them
Do i need to flash my BIOS, install drivers, change BIOS settings
Anybody who can help me ?
Thanks
|
|
|
|
|
I bought a 6 GPU mining rig.
Arctic mining rig level 5 with 6 x RX570
It was originaly installed for ETH, but it wanted to mine Zcash, so i decided to do a clean Windows install.
When i did the install everything worked fine, but when i ran claymore, i always had one miner GPU0 running at a lower hashrate, so i decided to flash them, install other amd driver software....etc
Eventually it worked by highering the Virtual memory, so i decided to try ot Overclock them. But the same thing happened again, the card ran at a lower hashrate etc etc ...
So the rig was constantly restarting when i tried to OC, so eventually i have re installed windows 5-6 times already.
So maybe it was a bios setting, so i went in to Bios and i clicked "load optimzed defaults" thinking maybe if i reset everything to factory, install a clean OS...everything will work fine.
But the rig instead of resetting, it powered off, and i couldn't boot from the integrated GPU anymore, and when i used the HDMI port of external GPU it went straight in to Desktop.
Without the BIOS splash screen and Windows logo. And GPU0 didn't work at all.
So then i decided to do a MOBO reset, and i got the battery out, and placed a jumper on the chmos reset pins.
So now i can get in to windows with a HDMI cord in GPU1, and i can see the splash screen and windows logo and everything, but everything works very slow, i can't see my integrated GPU anymore in device manager, i can't install cpu or gpu drivers on the MOBO.
I always get the same error "Computer doesn't qualfy to the minimal requirements"
And the screen resolution is in a smaller window then my flatsreen. The colour of my BIOS is changed.
I don't know what to do anymore ........
|
|
|
|
|
There is a dual bios switch on the cards. Do i have to slide it to the right and then flash the bios ?
|
|
|
|
Can somebody help me OC my
Six RX570 Red Dragon rig.
Running 270-280 h/s. Stock.
But don't know how to OC properly.
what os and driver do you use ? Windows 10 + blockchain amd drivers |
|
|
|
|
Can somebody help me OC my
Six RX570 Red Dragon rig.
Running 270-280 h/s. Stock.
But don't know how to OC properly.
|
|
|
|
|
I suggest Stellar XLM aswell. Looks promising with a company like IBM adopting it.
|
|
|
|
|
Memory type is elpida on all of them.
|
|
|
|
|
I solved the problem. I changes the virtual memory from 16 to 24 GB's.
Now all my cards run @ around ~ 270-280 h/s.
I would like to get 300 out of them.
But i don't get any higher rates out of them with highering/lowering cclock. Highering memoryclock.
Etc...
Do i need to change settings in BIOS. Or do something else?
|
|
|
|
For mining Zcash the amount of Ram is not important as long as you have at least 4GB of RAM DDR3, but 8 GB is the recommended amount.
What memory has this GPU-0 of yours ? Check it with GPU-Z program, if it is Hynix it doesn't care if you overclock it or not through Afterburner it will not show you higher hashrate. That's a known problem with Hynix memory.
If it doesn't recognize, your 6th GPU, you can try DDU, direct display driver uninstaller, then restart and reinstall the drivers. It should recognize it now. (it may not recognize all cards directly, some may show, as VGA Basic Adapters, click on them and Update driver until all are recognized)
Also tell me what motherboard do you have, some motherboards do not support overclocking all the cards.
I have a H81 btc 6 gpu supported mono. |
|
|
|
|
Weet iemand hoe ik die kan OC'en?
Ik krijg er nu rond 1630 h/s uit. Dus 270 ongeveer. Per GPU.
Ik heb al geprobeerd om de cclock te verhogen verlagen.enz...
Ik heb arcticsecrets gpu miner level 5 en claymore zecminer.
|
|
|
|
|
I'm using the integrated monitor. But problem is resolved with higher Virtual memory.
|
|
|
|
|
Show Posts
