 Show Posts
|
|
Pages: [1] 2 3 4 »
|
|
Having hard time to find cheap Club Mate here in France.
I'd buy 10 to 30 bottles (0.33l or 0.5l) around 0.008BTC/bottle including shipping to FR.
May order more later.
|
|
|
|
hello, (coucou David!  ) A tout hasard vous auriez sous la main les binaires linux pour du 32-bits ? Merci! |
|
|
|
|
Still available. 0€ - check back later
|
|
|
|
up  |
|
|
|
|
balance update: 200€ - $250 available
|
|
|
|
|
balance update: 150€ - $200 available
|
|
|
|
|
balance update: 100€ available
|
|
|
|
|
Still no dividend since january.
WHAT.THE.F*CK.
|
|
|
|
such a great offer... too bad you are not in EU  |
|
|
|
will wait for a group buy or slightly price drop  |
|
|
|
hey, I have an antminer which is running anormaly slow. [...] This antminer has been tested with different hubs (dlink, 49-ports...), alone, but it never reached more than 0,1Gh/s. The 21 other units are working very well, so I guess the item is faulty  Screws are tight... and it's not getting hot at all ... Any idea? Two ideas: 1) you are running the miner for a short period - wait at least some hours 2) that is the hash rate the pool sees - with zero shares it is quite natural the hash rate is bad and dropping!! Please, don't run the miners for 1 minutes and complain of slowness... I see AMU 0 running at 2.10 and the other two at 1.98!!! 1) I had it run for one day, no luck. bfgminer is reporting correct (5s avg/all time avg) but "effective avg" is < 0.1ghs and it produces very low shares. And running it on cgminer I'm getting those results: [P]ool management [S]ettings [D]isplay options [Q]uit
ANT 0: | 133.3M/65.73Mh/s | A: 36 R: 0 HW: 16 WU: 0.6/m
ANT 1: | 1.574G/1.530Gh/s | A:1296 R:128 HW: 51 WU:20.4/m
ANT 2: | 1.646G/1.733Gh/s | A:1400 R: 0 HW: 54 WU:23.2/m
ANT 3: | 1.596G/1.837Gh/s | A:1400 R: 0 HW: 59 WU:24.6/m 2) Yes, even after running it for hours it doesn't produce more shares. I have 27 other AMU running fine, that's why I wonder what happens with this one... Measure different voltages on the testpoints.
I'd like to know how to do that... I have a multimeter but have no clue what should I measure... I'm more in software than hardware ehe |
|
|
|
hey, I have an antminer which is running anormaly slow. In example with bfgminer known as AMU0 (5s avg/all time avg/effective avg): AMU 0: | 2.08/ 2.07/ 0.07Gh/s | A: 4 R:0+0(none) HW:0/none AMU 1: | 1.98/ 1.97/ 1.47Gh/s | A:50 R:0+0(none) HW:0/none Another try: AMU 0: | 2.10/ 2.07/ 0.10Gh/s | A: 0 R:0+0(none) HW:0/none AMU 1: | 1.98/ 1.99/ 1.45Gh/s | A: 13 R:0+0(none) HW:0/none AMU 2: | 1.98/ 1.98/ 1.48Gh/s | A: 10 R:0+0(none) HW:0/none This antminer has been tested with different hubs (dlink, 49-ports...), alone, but it never reached more than 0,1Gh/s. The 21 other units are working very well, so I guess the item is faulty Screws are tight... and it's not getting hot at all ... Any idea? |
|
|
|
|
ok, merci... me reste à trouver un client remote capable d'utiliser l'API.
je mine sous linux / bfgminer (ou autre, peu importe)
|
|
|
|
hello, Je voulais un peu jouer au loto avec du matos qui traine, mais il y a un truc qui m'embête : pour miner un solo, il faut connecter son mineur à bitcoin-qt ou bitcoind. et donc, à un wallet présent physiquement sur le mineur. Si mon mineur n'a pas d'interface graphique, comment faire pour consulter le solde du wallet à distance ? Je ne vais quand même pas copier le wallet en permanence du mineur vers mon pc client ? Dans l'idéal j'aurais bien aimé pouvoir miner vers un wallet synchronisable (type electrum ou autre) que j'aurais pu interroger à tout moment, mais apparement electrum ne gère pas ça. Merci de vos lumieres  |
|
|
|
hello, coucou dahugobez projet intéressant, ça ne court pas les rues en france. perso les marges sont déjà très faibles alors je ne pense pas y héberger mon matériel, sauf réel gain (électricité "gratuite" ou autre). D'autant plus que je ne suis pas dans le coin et que le transport représente autant de frais supplémentaires, de risques et de temps de minage perdu. Mais potentiellement intéressé à acheter des parts, si ça tient la route. |
|
|
|
thx BlueMonkey balance update: $100 - 75€ available $0 - 0€ (check back later) |
|
|
|
hi, anyone using orderbook API? Did I miss something or is it bugged? Did it work someday? In example, orderbook of MEC/BTC from API is crazy: From the API orderbook is {buy=0.00849000 sell= 0.00001564} (!!!)http://pubapi.cryptsy.com/api.php?method=singleorderdata&marketid=45{"success":1,"return":{"MEC":{"marketid":"45","label":"MEC\/BTC","primaryname":"MegaCoin","primarycode":"MEC","secondaryname":"BitCoin","secondarycode":"BTC",
"sellorders":[{"price":"0.00001564","quantity":"0.00000000","total":"0.00009123"},{"price":"0.00020000","quantity":"0.00000000","total":"0.03000000"}[...]
,"buyorders":[{"price":"0.00849000","quantity":"0.00000000","total":"0.22883971"},{"price":"0.00098517","quantity":"0.00000000","total":"0.03155533"}[...]
From the website, orderbook is {buy=0.00090118 sell=0.00090686}: SELL
Price (BTC) MEC Total (BTC)
0.00090686 157.04663585 0.14241931
0.00090688 0.99065585 0.00089841
0.00090725 27.96472681 0.02537100
BUY
Price (BTC) MEC Total (BTC)
0.00090118 0.11000000 0.00009913
0.00090117 115.55396831 0.10413377
0.00090116 38.15284734 0.03438182
|
|
|
|
|
still $140 available *but* regarding your trust and recent account, you'll have to pay first.
|
|
|
|
|
definitely interested! would take some if shipping to EU.
|
|
|
|
|
