Show Posts
|
Pages: [1] 2 3 4 5 6 7 »
|
Is there a possibility to have a version or Docker file, that works under Ubuntu 18.04 (Yiimp Server)?
you can try https://hub.docker.com/r/canadianbitcoin/aibHowever, it is pretty old. and it is a image file , not a docker file.
|
|
|
Check AIB's new DEFI project having fun to play around it: Currently is on Binance Smart Chain. Will add to Ethereum or other popular chain in the further. https://aibfarm.comJust remember that currently the AIB mainnet coin is not circulated to ERC20 / BEP20 / TRC20. In the near future will have the gate way to transfer between them under some risk control. Finally will be 1:1 cross-chain-able. Having fun with our clone projects. Follow twitter @aibcoin for the most recent update for AIB. It is failed.. sorry...
|
|
|
Check AIB's new DEFI project having fun to play around it: Currently is on Binance Smart Chain. Will add to Ethereum or other popular chain in the further. https://aibfarm.comJust remember that currently the AIB mainnet coin is not circulated to ERC20 / BEP20 / TRC20. In the near future will have the gate way to transfer between them under some risk control. Finally will be 1:1 cross-chain-able. Having fun with our clone projects. Follow twitter @aibcoin for the most recent update for AIB.
|
|
|
Nodes?
See this reply from the dev. Essentially: <snip>
config aib.conf :
connect = 104.238.153.71:31415 then start aibd
after on the right chain then could remove the connect if necessary.
HTH Thanks, however, 104.238.153.71:31415 has been abandon Keep AIB more DE-centralized, however it is not yet.
|
|
|
you should additionaly think about increasing protocol version and bann old version on given timestamp/blockheight to keep away old wallets with wrong chain-info.
(as requested my AIB-address AZn9oGK5vhaZ8twAiWeuXZqq8ToWLgyXUn )
sent
|
|
|
After 2 days of mining on 2 - 15 GHs no blocks were accepted. Relating statistics of https://miningpoolstats.stream/advancedinternetblock, blockchain with 2360794 blocks did not take any block 2 days already. While prohashing.com with blockchain 10951453 solving blocks every few minutes. Whats wrong with our pools? Thanks for reporting this issue. Place your AIB address, I will send a little bit bouns for your reporting.
|
|
|
as there is no reorg limit the client is flipping between two chains (reorgs >100k blocks) if connected to nodes of wrong chain. dev has to update checkpoint-data in code to lock on correct chain. diff --git a/src/chainparams.cpp b/src/chainparams.cpp index 9815ca0..56860e1 100644 --- a/src/chainparams.cpp +++ b/src/chainparams.cpp @@ -277,9 +277,14 @@ public: ( 1154619, uint256S("0xb3df98957ccfeb9da0eb5ef929cf929ae9a6bf1917f79578688b55c25cf6b67d")) ( 1213390, uint256S("0x098ed783d5cf8428215686ddef1a88ba372d58b28f3f571a437f15bbaae59d55")) ( 1216820, uint256S("0xe69b85a94471d42b254be77062f65edba84f3a5972a1d2a4bb8b14e1526cef52")) - ( 1224490, uint256S("c20d8dab92dc16854d6cddefe9ce7905aa18b0ad949cc7848dc7008338641c4c")), - 1513895220, // * UNIX timestamp of last checkpoint block - 1283706, // * total number of transactions between genesis and last checkpoint + ( 1224490, uint256S("0xc20d8dab92dc16854d6cddefe9ce7905aa18b0ad949cc7848dc7008338641c4c")) + ( 2192860, uint256S("0x0916d22a70d1b934a31934a2ea1482604c594bf3a1a9e58a73a627fde91dfebd")) + ( 2210000, uint256S("0x4f58bae8c6f572e7821bd2d3e6c66f2f82dce048b31302ef44f8ca8fd9ac139f")) + ( 2260000, uint256S("0xd04a48d6324eaf14e86c9de975eccf32449d6d6a3beb595868fdd273af1d9502")) + ( 2300000, uint256S("0x98bdbd3a6fa9d9daa714b3197506e905f0802866ef1bd8c669aba20ec19dfc1c")) + ( 2358115, uint256S("0x2eb558ba005a7f3ff2cbcb2ce3a1dc1384c824f9ac401aa4c3fa1c9ebe19f44e")), + 1591084557, // * UNIX timestamp of last checkpoint block + 2475276, // * total number of transactions between genesis and last checkpoint // (the tx=... number in the SetBestChain debug.log lines) 1440.0 // * estimated number of transactions per day after checkpoint };
Thanks for reporting this issue. We will look into to it. Place your AIB address, I will send a little bit bouns for your helping.
|
|
|
Thank you very much for very detailed information. It already on my pool
could you mention here, what's your pool? is it a public pool? do you want me to put on the list ?
|
|
|
Hello, I am trying to install it on yiimp pool but unfortunately starting with ./autogen.sh it ends with
configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ... /usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here src/Makefile.am: installing 'build-aux/depcomp' src/Makefile.am:465: warning: user target '.mm.o' defined here ... /usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here autoreconf: automake failed with exit status: 1
Libtoolize did not help.
Somebody have an advice?
Try this: For your convenience , we made a dockerfile to help you build, and also the blockdata to help you to fast sync up. ------ Dockerfile ----------------- https://github.com/iobond/aib/releases/download/aib-dockerfile/aib-dockerfile.tar.gzCompile from AIB source's Dockerfile. mkdir compile-aib cd compile-aib tar xf aib-dockerfile.tar.gz ./start.sh ls -lah ./release Will have your compiled aib binary for ubuntu 16.04 -------------------- Blockdata ------------ https://github.com/iobond/aib/releases/download/Blockdata-2211080/aib-block-2211080.tar.gz.xz.001https://github.com/iobond/aib/releases/download/Part-2-Block-2211080/aib-block-2211080.tar.gz.xz.002Block data for AIB @ Height 2211080 There is 2 parts of the file , combine into one then decompress than you could get the block data around 2.6G cat aib-block-2211080.tar.gz.xz.00? > aib-block-2211080.tar.gz.xz xz -d aib-block-2211080.tar.gz.xz tar xf aib-block-2211080.tar.gz when you init the sync, please use in aib.conf connect=connect.aib.one to make sure you are on the right chain
|
|
|
remove blocks & chainstate download part 1, part 2 from : https://github.com/iobond/aib/releasesthen : cat aib-block-2211080.tar.gz.xz.00? > aib-block-2211080.tar.gz.xz xz -d aib-block-2211080.tar.gz.xz tar xf aib-block-2211080.tar.gz config aib.conf : connect = 104.238.153.71:31415 then start aibd after on the right chain then could remove the connect if necessary. Thanks for your reply. I can confirm I am now on same height as block explorer and my desposits show up on stex. Nice,
|
|
|
What is the current wallet version or github tag to use? I am getting "warnings": "Warning: Unknown block versions being mined! It's possible unknown rules are in effect"
TIA We have attemp a failed upgrade to 0.17. so now down grage to 0.13 for now for stable version. Thanks, but with v5.13.3.17 I am unable to deposit coins into stex and master doesn't compile on any of my platforms: configure.ac:32: installing 'build-aux/missing' configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ... /usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here src/Makefile.am: installing 'build-aux/depcomp' src/Makefile.am:465: warning: user target '.mm.o' defined here ... /usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here parallel-tests: installing 'build-aux/test-driver' autoreconf: automake failed with exit status: 1
Check the master branch or aib-5.14 branch. Version inside should be v5.13.3.14 there is a build-linux.sh script later we might buid a dockerfile for easier build from souce for AIB . Thank you, I compiled from git tag v5.13.3.14, deleted the blockchain and resynched from scratch. Deposits are still not going to stex and while my block height is # 2409994, the block explorer shows a height of # 2302253. I guess there are a number of forks running meanwhile and I am unsure on how to get synched properly to send my coins to stex. remove blocks & chainstate download part 1, part 2 from : https://github.com/iobond/aib/releasesthen : cat aib-block-2211080.tar.gz.xz.00? > aib-block-2211080.tar.gz.xz xz -d aib-block-2211080.tar.gz.xz tar xf aib-block-2211080.tar.gz config aib.conf : connect = 104.238.153.71:31415 then start aibd after on the right chain then could remove the connect if necessary.
|
|
|
What is the current wallet version or github tag to use? I am getting "warnings": "Warning: Unknown block versions being mined! It's possible unknown rules are in effect"
TIA We have attemp a failed upgrade to 0.17. so now down grage to 0.13 for now for stable version. Thanks, but with v5.13.3.17 I am unable to deposit coins into stex and master doesn't compile on any of my platforms: configure.ac:32: installing 'build-aux/missing' configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ... /usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here src/Makefile.am: installing 'build-aux/depcomp' src/Makefile.am:465: warning: user target '.mm.o' defined here ... /usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here parallel-tests: installing 'build-aux/test-driver' autoreconf: automake failed with exit status: 1
Check the master branch or aib-5.14 branch. Version inside should be v5.13.3.14 there is a build-linux.sh script later we might buid a dockerfile for easier build from souce for AIB .
|
|
|
|