 Show Posts
|
|
Pages: [1] 2 3 4 5 6 »
|
What kind of files are the files in the new wallet for raspberry ¿They are a complete operating system with the wallet? I want to upgrade my raspberry wallet, but I can get the executables for raspberry. Also I have tried to compile but this version don't compile well with openssl 1.1. Thanks. |
|
|
|
Ok. So this explains why the wallet is "Not responding" every minute. Please fix the blockexplorer for transparency to minimize FUD -> http://193.70.109.114:5003This explorer stopped working properly since August 29.
-support teamBut search by address or hash doesn't work :-( |
|
|
|
|
Hi all.
I have invest some ETH in the PRE- ICO one hour ago and It doesn't show the transaction in the transaction history yet.
Is it that normal?
|
|
|
|
Hello, I've deposit 0.5 ETH on my account on www.mandarin.top. Those 0.5 ETH are showing in the balance but ESTIMATED MNT AMOUNT stay at 0. Is that normal ? Hello! The display of the ESTIMATED MNT AMOUNT appears after a while. Hello, I've deposit 1 ETH on my account on www.mandarin.top 13 days ago and the ESTIMATED MNT AMOUNT keeps at 0. Is that normal? Did you confirm your email already? Yes. |
|
|
|
Hello, I've deposit 0.5 ETH on my account on www.mandarin.top. Those 0.5 ETH are showing in the balance but ESTIMATED MNT AMOUNT stay at 0. Is that normal ? Hello! The display of the ESTIMATED MNT AMOUNT appears after a while. Hello, I've deposit 1 ETH on my account on www.mandarin.top 13 days ago and the ESTIMATED MNT AMOUNT keeps at 0. Is that normal? |
|
|
|
I was following this coin already... it seems nice and good someone knows the reward for the masternode?
On an average you can get about 100 coins in a week
-support teamThere is a problem with the chain explorer. The search doesn't gives any result. Can you check it? |
|
|
|
I use debian stable. You can't use the compiled wallet version because it is compiled with ubuntu in mind, you have to compile by yourself if you want to use debian stable.
If you want, I can send you a wallet compiled for debian stable.
I think that you are talking about old stable, because the actual debian stable version uses 1.62, but that fact doesn't change anything that I have told :-)
sudo make -f makefile.unix # Headless CoinonatX g++: error: /home/coinonatx/CoinonatX/src/leveldb/libleveldb.a: No such file or directory
g++: error: /home/coinonatx/CoinonatX/src/leveldb/libmemenv.a: No such file or directory
makefile.unix:224: recipe for target 'coinonatxd' failed
make: *** [coinonatxd] Error 1 To solve this, you have to give executing permissions to the file build_detect_platform (you can check a little up in your log that returns Permission denied with that file). In your case: sudo chmod +x /home/coinonatx/CoinonatX/src/leveldb/build_detect_platform OK. I make coinonatxd. How i can make CoinonatX-qt? I need this for debian8. How i can run masternode use only coinonatxd? Coinonatx-qt: cd /home/coinonatx/CoinonatX
qmake
make
You can run the masternode only with coinonatxd (I'm doing it), you don't need the qt to run the masternode, BUT, you need the QT to send the profits of the masternode to another account without stop the masternode. qmake
Project MESSAGE: Building with UPNP support
Project MESSAGE: Building with UPNP supportProject MESSAGE: Building with DBUS (Freedesktop notifications) supportRemoved plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
How i can run masternode use only coinonatxd? I don't have coinonatxd-cli. After the qmake command you have to execute make. |
|
|
|
|
The blockchain explorers don't work.
The explorer ONE doesn't work when searching for an address and the explorer TWO doesn't update since 08.29.
|
|
|
|
I use debian stable. You can't use the compiled wallet version because it is compiled with ubuntu in mind, you have to compile by yourself if you want to use debian stable.
If you want, I can send you a wallet compiled for debian stable.
I think that you are talking about old stable, because the actual debian stable version uses 1.62, but that fact doesn't change anything that I have told :-)
sudo make -f makefile.unix # Headless CoinonatX g++: error: /home/coinonatx/CoinonatX/src/leveldb/libleveldb.a: No such file or directory
g++: error: /home/coinonatx/CoinonatX/src/leveldb/libmemenv.a: No such file or directory
makefile.unix:224: recipe for target 'coinonatxd' failed
make: *** [coinonatxd] Error 1 To solve this, you have to give executing permissions to the file build_detect_platform (you can check a little up in your log that returns Permission denied with that file). In your case: sudo chmod +x /home/coinonatx/CoinonatX/src/leveldb/build_detect_platform OK. I make coinonatxd. How i can make CoinonatX-qt? I need this for debian8. How i can run masternode use only coinonatxd? Coinonatx-qt: cd /home/coinonatx/CoinonatX
qmake
make
You can run the masternode only with coinonatxd (I'm doing it), you don't need the qt to run the masternode, BUT, you need the QT to send the profits of the masternode to another account without stop the masternode. |
|
|
|
I use debian stable. You can't use the compiled wallet version because it is compiled with ubuntu in mind, you have to compile by yourself if you want to use debian stable.
If you want, I can send you a wallet compiled for debian stable.
I think that you are talking about old stable, because the actual debian stable version uses 1.62, but that fact doesn't change anything that I have told :-)
sudo make -f makefile.unix # Headless CoinonatX g++: error: /home/coinonatx/CoinonatX/src/leveldb/libleveldb.a: No such file or directory
g++: error: /home/coinonatx/CoinonatX/src/leveldb/libmemenv.a: No such file or directory
makefile.unix:224: recipe for target 'coinonatxd' failed
make: *** [coinonatxd] Error 1 To solve this, you have to give executing permissions to the file build_detect_platform (you can check a little up in your log that returns Permission denied with that file). In your case: sudo chmod +x /home/coinonatx/CoinonatX/src/leveldb/build_detect_platform |
|
|
|
 I have libboost1.55, last stable for debian8. How i can start masternode, use command line? I use debian stable. You can't use the compiled wallet version because it is compiled with ubuntu in mind, you have to compile by yourself if you want to use debian stable. If you want, I can send you a wallet compiled for debian stable. I think that you are talking about old stable, because the actual debian stable version uses 1.62, but that fact doesn't change anything that I have told :-) |
|
|
|
In a masternode configured without remote wallet (method A), Is it possible to use the reward address functionality? I mean, to receive the reward in another address?
I've had a look through the source code to see if I could spot the setting being loaded out of the main config file but it doesn't appear to be a supported feature. Happy to be proven wrong by someone with more knowledge  I have not found it either in the code :-( Maybe CoolerRSA can help us. Thanks for your answer. |
|
|
|
|
In a masternode configured without remote wallet (method A), Is it possible to use the reward address functionality? I mean, to receive the reward in another address?
|
|
|
|
Thank you for the update. Can you explain a little more the enhancement? |
|
|
|
New wallet for testing purposes. https://mega.nz/#!gzInGJwJ!Z5_YlEIxTnD0VfoiTI85kNltalNpvu4cni0ZUBY1wgw Don't forget to backup your data folder before. That are great news, thanks for your efforts! Do you have a github source? I'd like to compile this version on linux. Hoping due to the change to QT5 the memory consumption will be lower. chaincoind ~117MB / craved ~306MB lol Not sure if its the latest one, but it should. This version is focused on reading masternode.conf to run multiple mn more easely. thanks! It is an official client? Why it is not in the usual repository? |
|
|
|
wait... so no more ico? what happen to 1500 sky/ 1 btc ico, which is suppose to start on 15 april?  It was sold outand I missed it also. :-( . I want a second ICO also. :-) |
|
|
|
So does mojov3 still uses masternodes? If so what are the requirements and payout?
No. Mojov3 doesn't use masternodes. |
|
|
|
Hi, Can you send me some coins? CXzR7tQDHWgPQwxzhFod7SJmN48RLkZj8Y |
|
|
|
|
